Thanks, now I can use the eth0 to connect to the web-interface and the logical vlan network to use in a VM but I can't use the untagged VLAN1 in the VM. When I add a new logical network without VLAN tagging the web-interface returns "Cannot have more than one non-VLAN network on one interface." When I create a logical network with taggged ID 1 I can't connect from a VM to my VLAN1. So I have to find a way to created the following networks: - ovirtmgmt: without tagged vlan for managing -> works - vlan1: without tagged vlan for the VM's to connect to my default network -> currently no solution - vlan10: tagged vlan with id 10 -> works cheers gregor On 2015-09-04 18:05, Chris Liebman wrote:
You have to edit the ovirtgmt network and un-check the "VM Network" box:
Inline image 1
On Fri, Sep 4, 2015 at 8:47 AM, gregor <gregor_forum@catrix.at <mailto:gregor_forum@catrix.at>> wrote:
Hi,
is it possible to use different VLAN with one NIC in ovirt?
I can not add a logical network configured as VLAN to my ovirtmgmt interface, I get "Cannot have a non-VLAN VM network and VLAN-tagged networks on one interface."
The setup for the Port is a trunk of different tagged VLAN's and the default VLAN1 is untagged. Normally this work under centos where I give the nic eth0 an IP and create a nic eth0.10 for the VLAN with ID 10 and set an IP for it.
cheers gregor
_______________________________________________ Users mailing list Users@ovirt.org <mailto:Users@ovirt.org> http://lists.ovirt.org/mailman/listinfo/users