7:50 a.m.
Hi Martin,
I got the below output when I run the command and it works from both the nodes.
fence_ipmilan -a 192.168.1.114 -l admin -p admin -o status -v -P
Getting status of IPMI:192.168.1.114...Spawning: '/usr/bin/ipmitool -I lanplus -H
'192.168.1.114' -U 'admin' -P '[set]' -v chassis power
status'...
Chassis power = On
Done
Thanks
Renchu Mathew | Sr. IT Administrator
CRACKNELL DUBAI | P.O. Box 66231 | United Arab Emirates | T +971 4 3445417 | F
+971 4 3493675 | M +971 50 7386484
ABU DHABI | DUBAI | LONDON | MUSCAT | DOHA | JEDDAH
EMAIL renchu(a)cracknell.com | WEB www.cracknell.com
This email, its content and any files transmitted with it are intended solely for the
addressee(s) and may be legally privileged and/or confidential. If you are not the
intended recipient please let us know by email reply and delete it from the system. Please
note that any views or opinions presented in this email do not necessarily represent those
of the company. Email transmissions cannot be guaranteed to be secure or error-free as
information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete,
or contain viruses. The company therefore does not accept liability for any errors or
omissions in the contents of this message which arise as a result of email transmission.
-----Original Message-----
From: Martin Perina [mailto:mperina@redhat.com]
Sent: Thursday, January 22, 2015 6:12 PM
To: Renchu Mathew
Cc: users(a)ovirt.org; Eli Mesika
Subject: Re: [ovirt-users] Power Management config on Ovirt
----- Original Message -----
From: "Renchu Mathew" <renchu(a)cracknell.com>
To: "Martin Perina" <mperina(a)redhat.com>
Cc: users(a)ovirt.org
Sent: Thursday, January 22, 2015 2:39:43 PM
Subject: RE: [ovirt-users] Power Management config on Ovirt
Hi Martin,
Yes. The vdsm host.log is from node-02.
That's strange, I cannot find any call to fenceNode which should appear, if PM status
is gathered.
Eli, any idea?
I have checked the link and it says
we need to install the sever view management agent & net-snmp on the hosts.
Do we need to try this? How to install this on node? I used the below
irmc admin user.
Not, AFAIK this is needed only from Clustersuite, but not for oVirt.
But could you please execute this command on node-20 just to confirm that Fujitsu Primergy
is communicating through IPMI:
fence_ipmilan -a IP -l USER -p PASS -o status -v -P
where IP is IPMI address (from the log it should be 192.168.1.114) USER and PASS please
set according to you setup.
Thanks
Martin
[cid:image001.png@01D03669.DD48B4E0]
Regards
Renchu Mathew | Sr. IT Administrator
CRACKNELL DUBAI | P.O. Box 66231 | United Arab Emirates | T +971 4
3445417 | F +971 4 3493675 | M +971 50 7386484
ABU DHABI | DUBAI | LONDON | MUSCAT | DOHA | JEDDAH
EMAIL renchu(a)cracknell.com | WEB www.cracknell.com
This email, its content and any files transmitted with it are intended
solely for the addressee(s) and may be legally privileged and/or
confidential. If you are not the intended recipient please let us know
by email reply and delete it from the system. Please note that any
views or opinions presented in this email do not necessarily represent
those of the company. Email transmissions cannot be guaranteed to be
secure or error-free as information could be intercepted, corrupted,
lost, destroyed, arrive late or incomplete, or contain viruses. The
company therefore does not accept liability for any errors or
omissions in the contents of this message which arise as a result of email
transmission.
-----Original Message-----
From: Martin Perina [mailto:mperina@redhat.com]
Sent: Thursday, January 22, 2015 4:49 PM
To: Renchu Mathew
Cc: users(a)ovirt.org
Subject: Re: [ovirt-users] Power Management config on Ovirt
Hi,
according to [1] Fujitsu iRMC should be accessible using IPMI.
Now, I looked at logs, but I cannot see any fenceNode exection in vdsm.log.
According to engine.log, host Node-02.cracknell.com was used as fence proxy.
Are you sure that vdsm.log is from this host?
Thanks
Martin
[1]
https://www.redhat.com/archives/linux-cluster/2010-January/msg00056.ht
ml
----- Original Message -----
> From: "Renchu Mathew" <renchu(a)cracknell.com>
> To: "Martin Perina" <mperina(a)redhat.com>
> Cc: users(a)ovirt.org
> Sent: Thursday, January 22, 2015 12:37:51 PM
> Subject: RE: [ovirt-users] Power Management config on Ovirt
>
> Hi Martin,
>
> Please find attached log files from engine and proxy host. Not sure
> whether IPMI or which one can be used. It is Fujitsu iRMC port. I
> also
> tried the rsb but same error.
>
> Can we configure Power management using Fujitsu iRMC?
>
> Thanks & Regards
>
> Renchu Mathew
>
> -----Original Message-----
> From: Martin Perina [mailto:mperina@redhat.com]
> Sent: Thursday, January 22, 2015 1:58 PM
> To: Renchu Mathew
> Cc: users(a)ovirt.org
> Subject: Re: [ovirt-users] Power Management config on Ovirt
>
> Hi,
>
> first of all are you sure that Fujitsu PRIMERGY is accessible using
> IPMI protocol? If so, could you provide engine.log and also vdsm.log
> from host that was used as fencing proxy? You can find out which
> host
> is used as a proxy either in Events tab after you execute the test
> or in engine.log.
>
> Thanks
>
> Martin Perina
>
> ----- Original Message -----
> > From: "Renchu Mathew" <renchu(a)cracknell.com>
> > To: users(a)ovirt.org
> > Sent: Thursday, January 22, 2015 7:41:43 AM
> > Subject: [ovirt-users] Power Management config on Ovirt
> >
> >
> >
> > Dear all,
> >
> >
> >
> > I am trying to configure power management on ovirt v3.5
> > (ovirt-node-iso-3.5.0.ovirt35.20140912.el6) and using two Fujitsu
> > PRIMERGY
> > RX2540 M1 as node hypervisor. I used Fujitsu iRMC port on power
> > management configuration. The test gives a message “Test failed,
> > argument of type ‘NoneType’ is not iterable” as below . Also tried
> > rsb type as per redhat document.
> >
> >
> >
> > Fence-agents-3.1.5-35.el6_5.4.x86_64 is there on both nodes. Do we
> > need to specify anything in Options?
> >
> >
> >
> > Please help me.
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > Best Regards
> >
> >
> >
> >
> >
> > Renchu Mathew
> >
> >
> >
> >
> >
> > _______________________________________________
> > Users mailing list
> > Users@ovirt.org<mailto:Users@ovirt.org>
> > http://lists.ovirt.org/mailman/listinfo/users
> >
>