Re: [ovirt-users] vdsm keeps removing BOOTPROTO=dhcp from ifcfg-ovirtmgmt
Ahoj Kubo,
would you try running 'sudo vdsClient -s 0 setSafeNetworkConfig' right
after restarting the network service? I think your configuration needs
be persisted in VDSM's network persistence so it is restored (with the
same configuration) on startup.
Anyway, VDSM should be used to configure networks (directly using
vdsClient or indirectly through oVirt engine or via other means -- RPC).
Your network may be configured by running (assuming your NIC is eth0):
vdsClient -s 0 setupNetworks
'networks={ovirtmgmt:{nic:eth0,bootproto:dhcp,blockingdhcp:true,bridged:true,stp:false,defaultRoute:false}}'
If this doesn't help please attach /var/log/vdsm/supervdsm.log or file a
bug with myself as the assignee :-)
Thanks,
Ondra
On 11.8.2015 13:04, Jakub Niedermertl wrote:
Hi all,
I'd like my ovirtmgmt bridge to fetch ip address from dhcp, but vdsm keeps removing
'BOOTPROTO=dhcp' from /etc/sysconfig/network-scripts/ifcfg-ovirtmgmt.
I set the file as follows:
DEVICE=ovirtmgmt
TYPE=Bridge
DELAY=0
STP=off
ONBOOT=yes
BOOTPROTO=dhcp
MTU=1500
DEFROUTE=no
NM_CONTROLLED=no
IPV6INIT=no
call 'sudo systemctl restart network' and ip address is successfully assigned.
Then reboot the machine and ip address is not fetched and ifcfg-ovirtmgmt looks like this
# Generated by VDSM version 4.17.0-1240.git487a19e.fc22
DEVICE=ovirtmgmt
TYPE=Bridge
DELAY=0
STP=off
ONBOOT=yes
MTU=1500
DEFROUTE=no
NM_CONTROLLED=no
IPV6INIT=no
HOTPLUG=no
Is there any way how to prevent vdsm from removing BOOTPROTO statement or make ovirtmgmt
to work with dhcp?
Environment:
Host: runs in virt-manager vm, Fedora 22
vdsm: 4.17.0-1240.git487a19e.fc22 from
http://resources.ovirt.org/pub/ovirt-3.6-pre/rpm/fc$releasever/
Thanks.
Jakub
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users