Re: [ovirt-users] hosted-engine cant access engine appliance

On Tue, Nov 8, 2016 at 9:35 AM, Steffen Nolden <steffen.nolden(a)alumni.fh-aachen.de <mailto:steffen.nolden@alumni.fh-aachen.de>> wrote: Hello Florian, there is no problem to reslove the FQDN Can you please attach also VDSM logs fro the relevant time frame? [nolden@oVirtNode01 ~]$ nslookup oVirtEngine.com Server: 192.168.122.1 Address: 192.168.122.1#53 Name: oVirtEngine.com Address: 192.168.122.201 The '/etc/hosts' file of each host is configured to resolve the name. I tried it with stopped firewall, [nolden@oVirtNode01 ~]$ sudo systemctl stop firewalld [nolden@oVirtNode01 ~]$ sudo systemctl status firewalld ● firewalld.service - firewalld - dynamic firewall daemon Loaded: loaded (/usr/lib/systemd/system/firewalld.service; enabled; vendor preset: enabled) Active: inactive (dead) since Di 2016-11-08 09:10:46 CET; 3s ago Process: 724 ExecStart=/usr/sbin/firewalld --nofork --nopid $FIREWALLD_ARGS (code=exited, status=0/SUCCESS) Main PID: 724 (code=exited, status=0/SUCCESS) but i got the same error! Am 04.11.2016 um 15:50 schrieb Florian Nolden: > Hello Steffen, > > can your nodes resolve the FQDN "ovirtengine.com > <http://ovirtengine.com>" to the hosted engine ip ( nslookup > ovirtengine.com <http://ovirtengine.com>) ? > If that works have you tried to disable the firewall temporarily? > > 2016-11-04 14:11 GMT+01:00 Steffen Nolden > <steffen.nolden(a)alumni.fh-aachen.de > <mailto:steffen.nolden@alumni.fh-aachen.de>>: > > Hello, > > i tried to deploy hosted-engine on a testing environment. > First of all i tried to deploy with the option > > "Automatically execute engine-setup on the engine > appliance on first boot (Yes, No)[Yes]? Yes" > > but it got stuck. > > [ INFO ] Running engine-setup on the appliance > [ ERROR ] Engine setup got stuck on the appliance > [ ERROR ] Failed to execute stage 'Closing up': Engine setup > is stalled on the appliance since 600 seconds ago. Please > check its log on the appliance. > [ INFO ] Stage: Clean up > [ INFO ] Generating answer file > '/var/lib/ovirt-hosted-engine-setup/answers/answers-20161104112913.conf' > [ INFO ] Stage: Pre-termination > [ INFO ] Stage: Termination > [ ERROR ] Hosted Engine deployment failed: this system is not > reliable, please check the issue,fix and redeploy > Log file is located at > /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20161104110104-kyhq1e.log > > Next try i said 'No' and i tried to execute it myself. But i > can't access the engine appliance. > > [nolden@oVirtNode01 ~]$ sudo hosted-engine --console > /usr/share/vdsm/vdsClient.py:33: DeprecationWarning: > vdscli uses xmlrpc. since ovirt 3.6 xmlrpc is deprecated, > please use vdsm.jsonrpcvdscli > from vdsm import utils, vdscli, constants > The engine VM is running on this host > Verbunden mit der Domain: HostedEngine > Escape-Zeichen ist ^] > Fehler: Interner Fehler: Charakter-Einheit console0 > verwendet nicht ein PTY > > Additionally i can't ping or access the engine appliance via ssh. > > Did i forget to install a packege or configure something? > > Below my infrastructure and configs. Attached the log file. > > > Thanks for help. > > > > My infrastructure is a nestedVM system: > All systems have nested visualization activated > > HW with LinuxMint x86_64; > - VM with CentOS-7-x86_64; 24GB Ram; 7 cores; > - Nested VM with CentOS-7-x86_64; 12288GB Ram; 4 cores; > Hostname: oVirtNode01.com (192.168.122.101): Here i deploy > hosted-engine, Hostname: oVirtEngine.com (192.168.122.201) > - Nested VM with CentOS-7-x86_64; 4096GB Ram; 1 cores; > Hostname: oVirtNode02.com (192.168.122.102): > - Nested VM with CentOS-7-x86_64; 4096GB Ram; 1 cores; > Hostname: oVirtNode03.com (192.168.122.103): > > All three NestedVMs are updated, have installed the > ovirt-release40.rpm. Additional installed: > screen (4.1.0), ovirt-hosted-engine-setup (2.0.2.2), > vdsm-gluster (4.18.13), bridge-utils (1.5), > vdsm (4.18.13), vdsm-cli (4.18.13), glusterfs-server > (3.7.16), samba. > > First NestedVM additional installed ovirt-engine-appliance > 4.0-20160928.1.el7.centos > > The three VMs building a glusterfs volume "engine" 3 replica, > with the options... > > Volume Name: engine > Type: Replicate > Volume ID: e92849b7-af3b-4ccd-bd0d-69a5ab3b6214 > Status: Started > Number of Bricks: 1 x 3 = 3 > Transport-type: tcp > Bricks: > Brick1: oVirtNode01.com:/gluster/engine/brick1 > Brick2: oVirtNode02.com:/gluster/engine/brick1 > Brick3: oVirtNode03.com:/gluster/engine/brick1 > Options Reconfigured: > auth.allow: 192.168.122.* > storage.owner-gid: 36 > storage.owner-uid: 36 > performance.readdir-ahead: on > > ## Session 1 (hosted-engine deploy without automatically > execute engine-setup) > [nolden@oVirtNode01 ~]$ sudo hosted-engine --deploy > /usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/lib/storage_backends.py:15: > DeprecationWarning: vdscli uses xmlrpc. since ovirt 3.6 > xmlrpc is deprecated, please use vdsm.jsonrpcvdscli > import vdsm.vdscli > [ INFO ] Stage: Initializing > [ INFO ] Generating a temporary VNC password. > [ INFO ] Stage: Environment setup > During customization use CTRL-D to abort. > Continuing will configure this host for serving as > hypervisor and create a VM where you have to install the > engine afterwards. > Are you sure you want to continue? (Yes, No)[Yes]: > [ INFO ] Hardware supports virtualization > Configuration files: [] > Log file: > /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20161104123834-chwikf.log > Version: otopi-1.5.2 (otopi-1.5.2-1.el7.centos) > [ INFO ] Stage: Environment packages setup > [ INFO ] Stage: Programs detection > [ INFO ] Stage: Environment setup > [ INFO ] Generating libvirt-spice certificates > [ INFO ] Stage: Environment customization > > --== STORAGE CONFIGURATION ==-- > > Please specify the storage you would like to use > (glusterfs, iscsi, fc, nfs3, nfs4)[nfs3]: glusterfs > [ INFO ] Please note that Replica 3 support is required for > the shared storage. > Please specify the full shared storage connection > path to use (example: host:/path): oVirtNode01.com:/engine > [ INFO ] GlusterFS replica 3 Volume detected > [ INFO ] Installing on first host > [ INFO ] GlusterFS replica 3 Volume detected > > --== SYSTEM CONFIGURATION ==-- > > > --== NETWORK CONFIGURATION ==-- > > iptables was detected on your computer, do you wish > setup to configure it? (Yes, No)[Yes]: No > Please indicate a pingable gateway IP address > [192.168.122.1]: > Please indicate a nic to set ovirtmgmt bridge on: > (eth0) [eth0]: > > --== VM CONFIGURATION ==-- > > Booting from cdrom on RHEL7 is ISO image based > only, as cdrom passthrough is disabled (BZ760885) > Please specify the device to boot the VM from > (choose disk for the oVirt engine appliance) > (cdrom, disk, pxe) [disk]: > Please specify the console type you would like to > use to connect to the VM (vnc, spice) [vnc]: > [ INFO ] Detecting available oVirt engine appliances > The following appliance have been found on your system: > [1] - The oVirt Engine Appliance image (OVA) - > 4.0-20160928.1.el7.centos > [2] - Directly select an OVA file > Please select an appliance (1, 2) [1]: > [ INFO ] Verifying its sha1sum > [ INFO ] Checking OVF archive content (could take a few > minutes depending on archive size) > [ INFO ] Checking OVF XML content (could take a few minutes > depending on archive size) > [WARNING] OVF does not contain a valid image description, > using default. > Would you like to use cloud-init to customize the > appliance on the first boot (Yes, No)[Yes]? > Would you like to generate on-fly a cloud-init ISO > image (of no-cloud type) > or do you have an existing one (Generate, > Existing)[Generate]? > Please provide the FQDN you would like to use for > the engine appliance. > Note: This will be the FQDN of the engine VM you > are now going to launch, > it should not point to the base host or to any > other existing machine. > Engine VM FQDN: (leave it empty to skip): []: > oVirtEngine.com > Automatically execute engine-setup on the engine > appliance on first boot (Yes, No)[Yes]? No > Please provide the domain name you would like to > use for the engine appliance. > Engine VM domain: [com] > Enter root password that will be used for the > engine appliance (leave it empty to skip): > Confirm appliance root password: > The following CPU types are supported by this host: > - model_SandyBridge: Intel SandyBridge Family > - model_Westmere: Intel Westmere Family > - model_Nehalem: Intel Nehalem Family > - model_Penryn: Intel Penryn Family > - model_Conroe: Intel Conroe Family > Please specify the CPU type to be used by the VM > [model_SandyBridge]: > Please specify the number of virtual CPUs for the > VM (Defaults to appliance OVF value): [4]: 3 > [WARNING] Minimum requirements for disk size not met > You may specify a unicast MAC address for the VM or > accept a randomly generated default [00:16:3e:2a:82:17]: > Please specify the memory size of the VM in MB > (Defaults to maximum available): [10880]: 8144 > How should the engine VM network be configured > (DHCP, Static)[DHCP]? Static > Please enter the IP address to be used for the > engine VM [192.168.122.2]: 192.168.122.201 > [ INFO ] The engine VM will be configured to use > 192.168.122.201/24 <http://192.168.122.201/24> > Please provide a comma-separated list (max 3) of IP > addresses of domain name servers for the engine VM > Engine VM DNS (leave it empty to skip) [192.168.122.1]: > Add lines for the appliance itself and for this > host to /etc/hosts on the engine VM? > Note: ensuring that this host could resolve the > engine VM hostname is still up to you > (Yes, No)[No] Yes > > --== HOSTED ENGINE CONFIGURATION ==-- > > Enter engine admin password: > Confirm engine admin password: > Enter the name which will be used to identify this > host inside the Administrator Portal [hosted_engine_1]: > Please provide the name of the SMTP server through > which we will send notifications [localhost]: > Please provide the TCP port number of the SMTP > server [25]: > Please provide the email address from which > notifications will be sent [root@localhost]: > Please provide a comma-separated list of email > addresses which will get notifications [root@localhost]: > [ INFO ] Stage: Setup validation > > --== CONFIGURATION PREVIEW ==-- > > Bridge interface : eth0 > Engine FQDN : oVirtEngine.com > Bridge name : ovirtmgmt > Host address : oVirtNode01 > SSH daemon port : 22 > Gateway address : 192.168.122.1 > Host name for web application : hosted_engine_1 > Storage Domain type : glusterfs > Host ID : 1 > Image size GB : 10 > Storage connection : oVirtNode01.com:/engine > Console type : vnc > Memory size MB : 8144 > MAC address : 00:16:3e:2a:82:17 > Boot type : disk > Number of CPUs : 3 > OVF archive (for disk boot) : > /usr/share/ovirt-engine-appliance/ovirt-engine-appliance-4.0-20160928.1.el7.centos.ova > Appliance version : 4.0-20160928.1.el7.centos > CPU Type : model_SandyBridge > > Please confirm installation settings (Yes, No)[Yes]: > [ INFO ] Stage: Transaction setup > ... > [ INFO ] Stage: Closing up > The following network ports should be opened: > tcp:5900 > tcp:5901 > tcp:9090 > udp:5900 > udp:5901 > An example of the required configuration for > iptables can be found at: > /etc/ovirt-hosted-engine/iptables.example > In order to configure firewalld, copy the files from > /etc/ovirt-hosted-engine/firewalld to > /etc/firewalld/services > and execute the following commands: > firewall-cmd -service hosted-cockpit > firewall-cmd -service hosted-console > [ INFO ] Creating VM > You can now connect to the VM with the following > command: > hosted-engine --console > You can also graphically connect to the VM from > your system with the following command: > remote-viewer vnc://oVirtNode01:5900 > Use temporary password "2263CpET" to connect to vnc > console. > Please ensure that your Guest OS is properly > configured to support serial console according to your distro > documentation. > Follow > http://www.ovirt.org/Serial_Console_Setup#I_need_to_access_the_console_th... > <http://www.ovirt.org/Serial_Console_Setup#I_need_to_access_the_console_th... > for more info. > If you need to reboot the VM you will need to start > it manually using the command: > hosted-engine --vm-start > You can then set a temporary password using the > command: > hosted-engine --add-console-password > Please install and setup the engine in the VM. > You may also be interested in installing > ovirt-guest-agent-common package in the VM. > > > The VM has been rebooted. > To continue please install oVirt-Engine in the VM > (Follow http://www.ovirt.org/Quick_Start_Guide > <http://www.ovirt.org/Quick_Start_Guide> for more info). > > Make a selection from the options below: > (1) Continue setup - oVirt-Engine installation is > ready and ovirt-engine service is up > (2) Abort setup > (3) Power off and restart the VM > (4) Destroy VM and abort setup > > (1, 2, 3, 4)[1]: > ## Session 2 > [nolden@oVirtNode01 ~]$ sudo hosted-engine --console > /usr/share/vdsm/vdsClient.py:33: DeprecationWarning: vdscli > uses xmlrpc. since ovirt 3.6 xmlrpc is deprecated, please use > vdsm.jsonrpcvdscli > from vdsm import utils, vdscli, constants > The engine VM is running on this host > Verbunden mit der Domain: HostedEngine > Escape-Zeichen ist ^] > Fehler: Interner Fehler: Charakter-Einheit console0 verwendet > nicht ein PTY > [nolden@oVirtNode01 ~]$ ssh root(a)oVirtEngine.com > <mailto:root@oVirtEngine.com> > ssh: connect to host ovirtengine.com <http://ovirtengine.com> > port 22: No route to host > > ## Back to session 1 > ... > (1, 2, 3, 4)[1]: 1 > > Checking for oVirt-Engine status at oVirtEngine.com... > [ INFO ] Engine is still unreachable > oVirt-Engine health status page is not yet reachable. > > > The VM has been rebooted. > To continue please install oVirt-Engine in the VM > (Follow http://www.ovirt.org/Quick_Start_Guide > <http://www.ovirt.org/Quick_Start_Guide> for more info). > > Make a selection from the options below: > (1) Continue setup - oVirt-Engine installation is > ready and ovirt-engine service is up > (2) Abort setup > (3) Power off and restart the VM > (4) Destroy VM and abort setup > > (1, 2, 3, 4)[1]: 2 > [ ERROR ] Failed to execute stage 'Closing up': Setup aborted > by user > [ INFO ] Stage: Clean up > [ INFO ] Generating answer file > '/var/lib/ovirt-hosted-engine-setup/answers/answers-20161104130223.conf' > [ INFO ] Stage: Pre-termination > [ INFO ] Stage: Termination > [ ERROR ] Hosted Engine deployment failed: this system is not > reliable, please check the issue,fix and redeploy > Log file is located at > /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20161104123834-chwikf.log > > > _______________________________________________ > Users mailing list > Users(a)ovirt.org <mailto:Users@ovirt.org> > http://lists.ovirt.org/mailman/listinfo/users > <http://lists.ovirt.org/mailman/listinfo/users> > > _______________________________________________ Users mailing list Users(a)ovirt.org <mailto:Users@ovirt.org> http://lists.ovirt.org/mailman/listinfo/users <http://lists.ovirt.org/mailman/listinfo/users>