Alex,
Please tell what is the tooltip saying. What is the reason for networks
being out-of-sync?
It is possible that the out-of-sync is the reason for the network issue.
It's a real problem that your ifcfg-ovirtmgmt file was missing after
upgrade, could it be that it wasn't persisted and saved on the host before
running the upgrade?
- Can you please try to press the 'refresh caps' button?
- Does the 'save Network Configuration' button grayed out or it's possible
to press it?
- Another option is to migrate the hosted-engine VM to another host in the
cluster and then sync the network on the host.(as you can't sync a network
being used by a running VM).
Regards,
On Wed, May 17, 2017 at 8:42 AM, Alex R <ar.digger(a)gmail.com> wrote:
Hi Michael, thanks for the suggestion. When I use the GUI I get the
error
"Error while executing action HostSetupNetworks: Network is currently
being used"
The network is in use by the engine, that is why I asked if there is a was
to sync via the CLI.
This problem happened after I did the latest upgraded and the host had
lost the /etc/sysconfig/netowrk-scripts/ifcfg-ovirtmgmt file. So I
recreated the file and I thought alll was well except I cannot open a from
outside of the host and engine network (10.3.1.0/24).
source 10.3.5.0/24 cannot open console on at the destination 10.3.1.0/24.
The error I get is:
"Unable to connect to the graphic server /tmp/mozilla_digger0/console.vv
could not connect to 10.3.1.7:Socket I/O timed out"
I have already verified that the iptables rules are open and I have
verified that ASA that is between the network is not blocking by doing both
a packet-tracer and reviewing the logs.
I think the problem is this "out-of-sync" network issue?
-Alex
On Tue, May 16, 2017 at 10:12 PM, Michael Burman <mburman(a)redhat.com>
wrote:
> Hello Alex,
>
> - Have you tried to sync it using the 'Sync All Networks' button in the
> UI?
> It's located under 'Hosts' main tab > select the host >
'Network
> Interfaces' sub tab > 'Sync All Networks' button.
>
> - Can you please go to the 'Setup Host Networks' dialog(located under the
> same path^^) and hoover on top of ovirtmgmt network? a tooltip should
> pop-up and it should let you know what is the reason that the network is
> being out-of-sync. Engine probably complaining about a difference between
> the configuration on the host and the DC.
> - How did you end up with this situation? what happened before the
> network become out-of-sync? did it happened after the hosted-engine deploy
> was done?
>
> Best regards,
>
> On Wed, May 17, 2017 at 12:10 AM, Alex R <ar.digger(a)gmail.com> wrote:
>
>> No one has suggestions on how I can sync the ovirtmgmt network? Is more
>> information needed?
>>
>>
>> On May 12, 2017 10:43 AM, "Alex R" <ar.digger(a)gmail.com> wrote:
>>
>>> Hi,
>>>
>>> I upgraded to the latest version (users(a)ovirt.org) a few weeks ago and
>>> ever since then I cannot open a console unless I am on the local network (
>>> 10.3.1.0/24). I think it is related to the Ovirtmgmt interface being
>>> "out-of-sync".
>>>
>>> If I try to fix it in the gui, I get an error:
>>>
>>> "Error while executing action HostSetupNetworks: Network is currently
>>> being used"
>>>
>>> This is because the hosted engine in on the ovirtmgmt network.
>>>
>>> Is there a way I can fix this via cli? This is a single host with a
>>> hosted engine. I use it for development only.
>>>
>>> Thank you.
>>>
>>
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org
>>
http://lists.ovirt.org/mailman/listinfo/users
>>
>>
>
>
> --
> Michael Burman
> RedHat Israel, RHV-M Network QE
>
> Mobile: 054-5355725
> IRC: mburman
>
--
Michael Burman
RedHat Israel, RHV-M Network QE
Mobile: 054-5355725
IRC: mburman