Re: [ovirt-users] hostusb hook - VM device errors in Windows VM

On 21 Jul 2014, at 20:54, Steve Dainard wrote: I should mention I can mount this usb drive in a CentOS 6.5 VM without any problems. Hi, there should be no difference configuration-wise. well, please compare libvirt's xml to be sure and confirm If it's the case then it might be a problem of qemu/kvm and/or windows Thanks, michal On Mon, Jul 21, 2014 at 2:11 PM, Steve Dainard <sdainard(a)miovision.com&gt; wrote: > I'm using the hostusb hook on RHEV 3.4 trial. > > The usb device is passed through to the VM, but I'm getting errors in a > Windows VM when the device driver is loaded. > > I started with a simple usb drive, on the host it is listed as: > > Bus 002 Device 010: ID 05dc:c75c Lexar Media, Inc. > > Which I added as 0x05dc:0xc75c to the Windows 7 x64 VM. > > In Windows I get an error in device manager: > USB Mass Storage Device "This device cannot start. (Code 10)" > Properties/General Tab: Device type: Universal Serial Bus Controllers, > Manufacturer: Compatible USB storage device, Location: Port_#0001.Hub_#0001 > > Under hardware Ids: > USB\VID_05DC&PID_C75C&REV_0102 > USB\VID_05DC&PID_C75C > > So it looks like the proper USB device ID is passed to the VM. > > I don't see any error messages in event viewer, and I don't see anything > in VDSM logs either. > > Any help is appreciated. > > Steve > _______________________________________________ Users mailing list Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users