I specifically need the scsi support (virtio-scsi).
I do know about the virtio-block support, which results in /dev/vd*
devices as you say.
From what I read even EL6 earlier than 6.3 does not support
virtio-scsi
Sorry, I did read your email to fast as it seems.
You're right you need at least RHEL 6.3 for virtio-scsi support.
Alternatively, does oVirt support an emulated scsi adapter of a
different type that would allow me to see scsi disks?
Regards,
Paul
On Wednesday, 13 November 2013 7:23 PM, René Koch (ovido)
<r.koch(a)ovido.at> wrote:
On Wed, 2013-11-13 at 09:41 +0100, Sander Grendelman wrote:
> According to
https://access.redhat.com/site/solutions/20511 virtio
> work on > rhel5.3.
>
> You have to edit /etc/modprobe.conf and generate a new initrd.
If you're installing the OS on a VirtIO disk this is done
automatically
by anaconda. I just installed RHEL 5 on oVirt 3.3 with VirtIO disk and
everything worked out of the box.
>
> On Wed, Nov 13, 2013 at 9:32 AM, Sven Kieske <S.Kieske(a)mittwald.de>
wrote:
> > Hi,
> >
> > afaik the rhel 5 kernel series just has not the necessary drivers
for
> > all virtio stuff, so it's not supported and does not work, unless
> > you want to patch your own kernel.
> >
> > Am 13.11.2013 06:44, schrieb Paul Jansen:
> >> I have just set up an Ovirt 3.3.0 install and have done a test
install of Centos 6.4 in a VM. The VM was configured with an IDE
drive and a virtio-scsi drive. The Centos 6.4 install sees both
drives OK.
> >> I'm wanting to do some testing on a product that is based on EL5,
but I'm finding that it cannot see the virtio-scsi drive. It does
show up in the output of 'lspci', but I don't see a corresponding
'sd'
device.
> >>
There's no /dev/sd* device - the devices are named /dev/vd*...
> >> I've just tried installing Centos 5.10 and the support is not
there.
Didn't test CentOS but RHEL 5 is working fine.
Regards,
René
> >>
> >> Does anyone know of any tricks to allow EL5 to see the
virtio-scsi device?
> >
> >
> > --
> > Mit freundlichen Grüßen / Regards
> >
> > Sven Kieske
> >
> > Systemadministrator
> > Mittwald CM Service GmbH & Co. KG
> > Königsberger Straße 6
> > 32339 Espelkamp
> > T: +49-5772-293-100
> > F: +49-5772-293-333
> >
https://www.mittwald.de
> > Geschäftsführer: Robert Meyer
> > St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad
Oeynhausen
> > Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad
Oeynhausen
> > _______________________________________________
> > Users mailing list
> > Users(a)ovirt.org
> >
http://lists.ovirt.org/mailman/listinfo/users
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
>
http://lists.ovirt.org/mailman/listinfo/users