Hi Dominik, All,
I've checked 'https://lists.ovirt.org/archives/list/users@ovirt.org/thread/W6U4XJHNMYMD3WIXDCPGOXLW6DFMCYIM/' and the user managed to clear up and start over.
I have removed the ovn-external-provider from UI, but I forgot to copy the data from the fields.
Do you know any refference guide (or any tips & tricks) for adding OVN ?
Thanks in advance.
Best Regards,
Strahil NikolovOn Dec 12, 2019 20:49, Strahil <hunter86_bg@yahoo.com> wrote:Hi Dominik,
Thanks for the reply.
Sadly the openstack module is missing on the engine and I have to figure it out.
Can't I just undeploy the ovn and then redeploy it back ?
Best Regards,
Strahil NikolovOn Dec 12, 2019 09:32, Dominik Holler <dholler@redhat.com> wrote:The cleanest way to clean up is to remove all entities on the OpenStack Network API on ovirt-provider-ovn, e.g. by something likeThis should work, if not, please report a bug.To bypass the ovirt-provider-ovn, which is not recommended and might end in an inconsistent state, you could use ovn-nbctl .On Thu, Dec 12, 2019 at 3:33 AM Strahil Nikolov <hunter86_bg@yahoo.com> wrote:_______________________________________________Hi Community,can someone hint me how to get rid of some ports? I just want to 'reset' my ovn setup.Here is what I have so far:[root@ovirt1 openvswitch]# ovs-vsctl list interface
_uuid : be89c214-10e4-4a97-a9eb-1b82bc433a24
admin_state : up
bfd : {}
bfd_status : {}
cfm_fault : []
cfm_fault_status : []
cfm_flap_count : []
cfm_health : []
cfm_mpid : []
cfm_remote_mpids : []
cfm_remote_opstate : []
duplex : []
error : []
external_ids : {}
ifindex : 35
ingress_policing_burst: 0
ingress_policing_rate: 0
lacp_current : []
link_resets : 0
link_speed : []
link_state : up
lldp : {}
mac : []
mac_in_use : "7a:7d:1d:a7:43:1d"
mtu : []
mtu_request : []
name : "ovn-25cc77-0"
ofport : 6
ofport_request : []
options : {csum="true", key=flow, remote_ip="192.168.1.64"}
other_config : {}
statistics : {rx_bytes=0, rx_packets=0, tx_bytes=0, tx_packets=0}
status : {tunnel_egress_iface=ovirtmgmt, tunnel_egress_iface_carrier=up}
type : geneve
_uuid : ec6a6688-e5d6-4346-ac47-ece1b8379440
admin_state : down
bfd : {}
bfd_status : {}
cfm_fault : []
cfm_fault_status : []
cfm_flap_count : []
cfm_health : []
cfm_mpid : []
cfm_remote_mpids : []
cfm_remote_opstate : []
duplex : []
error : []
external_ids : {}
ifindex : 13
ingress_policing_burst: 0
ingress_policing_rate: 0
lacp_current : []
link_resets : 0
link_speed : []
link_state : down
lldp : {}
mac : []
mac_in_use : "66:36:dd:63:dc:48"
mtu : 1500
mtu_request : []
name : br-int
ofport : 65534
ofport_request : []
options : {}
other_config : {}
statistics : {collisions=0, rx_bytes=0, rx_crc_err=0, rx_dropped=0, rx_errors=0, rx_frame_err=0, rx_over_err=0, rx_packets=0, tx_bytes=0, tx_dropped=0, tx_errors=0, tx_packets=0}
status : {driver_name=openvswitch}
type : internal
_uuid : 1e511b4d-f7c2-499f-bd8c-07236e7bb7af
admin_state : up
bfd : {}
bfd_status : {}
cfm_fault : []
cfm_fault_status : []
cfm_flap_count : []
cfm_health : []
cfm_mpid : []
cfm_remote_mpids : []
cfm_remote_opstate : []
duplex : []
error : []
external_ids : {}
ifindex : 35
ingress_policing_burst: 0
ingress_policing_rate: 0
lacp_current : []
link_resets : 0
link_speed : []
link_state : up
lldp : {}
mac : []
mac_in_use : "1a:85:d1:d9:e2:a5"
mtu : []
mtu_request : []
name : "ovn-566849-0"
ofport : 5
ofport_request : []
options : {csum="true", key=flow, remote_ip="192.168.1.41"}
other_config : {}
statistics : {rx_bytes=0, rx_packets=0, tx_bytes=0, tx_packets=0}
status : {tunnel_egress_iface=ovirtmgmt, tunnel_egress_iface_carrier=up}
type : geneve
When I try to remove a port - it never ends (just hanging):[root@ovirt1 openvswitch]# ovs-vsctl --dry-run del-port br-int ovn-25cc77-0
In journal I see only this:дек 12 04:13:57 ovirt1.localdomain ovs-vsctl[22030]: ovs|00001|vsctl|INFO|Called as ovs-vsctl --dry-run del-port br-int ovn-25cc77-0The stranger part to me is the log output:[root@ovirt1 openvswitch]# grep ovn-25cc77-0 /var/log/openvswitch/*.log
/var/log/openvswitch/ovs-vswitchd.log:2019-12-12T01:26:28.642Z|00032|bridge|INFO|bridge br-int: added interface ovn-25cc77-0 on port 14
/var/log/openvswitch/ovs-vswitchd.log:2019-12-12T01:45:15.646Z|00113|bridge|INFO|bridge br-int: deleted interface ovn-25cc77-0 on port 14
/var/log/openvswitch/ovs-vswitchd.log:2019-12-12T01:45:15.861Z|00116|bridge|INFO|bridge br-int: added interface ovn-25cc77-0 on port 2
/var/log/openvswitch/ovs-vswitchd.log:2019-12-12T01:50:36.678Z|00118|bridge|INFO|bridge br-int: deleted interface ovn-25cc77-0 on port 2
/var/log/openvswitch/ovs-vswitchd.log:2019-12-12T01:52:31.180Z|00121|bridge|INFO|bridge br-int: added interface ovn-25cc77-0 on port 3
/var/log/openvswitch/ovs-vswitchd.log:2019-12-12T01:55:09.734Z|00125|bridge|INFO|bridge br-int: deleted interface ovn-25cc77-0 on port 3
/var/log/openvswitch/ovs-vswitchd.log:2019-12-12T01:58:15.138Z|00127|bridge|INFO|bridge br-int: added interface ovn-25cc77-0 on port 6
I'm also attaching the verbose output of the dryrun.Thanks in advance.Best Regards,Strahil Nikolov
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-leave@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/IG7YJPINVAF2BWRUB4US24EFFM5MQEED/