7:29 p.m.
Hi Community,
can someone hint me how to get rid of some ports? I just want to 'reset' my ovn
setup.
Here is what I have so far:
[root@ovirt1 openvswitch]# ovs-vsctl list interface
_uuid : be89c214-10e4-4a97-a9eb-1b82bc433a24
admin_state : up
bfd : {}
bfd_status : {}
cfm_fault : []
cfm_fault_status : []
cfm_flap_count : []
cfm_health : []
cfm_mpid : []
cfm_remote_mpids : []
cfm_remote_opstate : []
duplex : []
error : []
external_ids : {}
ifindex : 35
ingress_policing_burst: 0
ingress_policing_rate: 0
lacp_current : []
link_resets : 0
link_speed : []
link_state : up
lldp : {}
mac : []
mac_in_use : "7a:7d:1d:a7:43:1d"
mtu : []
mtu_request : []
name : "ovn-25cc77-0"
ofport : 6
ofport_request : []
options : {csum="true", key=flow,
remote_ip="192.168.1.64"}
other_config : {}
statistics : {rx_bytes=0, rx_packets=0, tx_bytes=0, tx_packets=0}
status : {tunnel_egress_iface=ovirtmgmt, tunnel_egress_iface_carrier=up}
type : geneve
_uuid : ec6a6688-e5d6-4346-ac47-ece1b8379440
admin_state : down
bfd : {}
bfd_status : {}
cfm_fault : []
cfm_fault_status : []
cfm_flap_count : []
cfm_health : []
cfm_mpid : []
cfm_remote_mpids : []
cfm_remote_opstate : []
duplex : []
error : []
external_ids : {}
ifindex : 13
ingress_policing_burst: 0
ingress_policing_rate: 0
lacp_current : []
link_resets : 0
link_speed : []
link_state : down
lldp : {}
mac : []
mac_in_use : "66:36:dd:63:dc:48"
mtu : 1500
mtu_request : []
name : br-int
ofport : 65534
ofport_request : []
options : {}
other_config : {}
statistics : {collisions=0, rx_bytes=0, rx_crc_err=0, rx_dropped=0, rx_errors=0,
rx_frame_err=0, rx_over_err=0, rx_packets=0, tx_bytes=0, tx_dropped=0, tx_errors=0,
tx_packets=0}
status : {driver_name=openvswitch}
type : internal
_uuid : 1e511b4d-f7c2-499f-bd8c-07236e7bb7af
admin_state : up
bfd : {}
bfd_status : {}
cfm_fault : []
cfm_fault_status : []
cfm_flap_count : []
cfm_health : []
cfm_mpid : []
cfm_remote_mpids : []
cfm_remote_opstate : []
duplex : []
error : []
external_ids : {}
ifindex : 35
ingress_policing_burst: 0
ingress_policing_rate: 0
lacp_current : []
link_resets : 0
link_speed : []
link_state : up
lldp : {}
mac : []
mac_in_use : "1a:85:d1:d9:e2:a5"
mtu : []
mtu_request : []
name : "ovn-566849-0"
ofport : 5
ofport_request : []
options : {csum="true", key=flow,
remote_ip="192.168.1.41"}
other_config : {}
statistics : {rx_bytes=0, rx_packets=0, tx_bytes=0, tx_packets=0}
status : {tunnel_egress_iface=ovirtmgmt, tunnel_egress_iface_carrier=up}
type : geneve
When I try to remove a port - it never ends (just hanging):
[root@ovirt1 openvswitch]# ovs-vsctl --dry-run del-port br-int ovn-25cc77-0
In journal I see only this:дек 12 04:13:57 ovirt1.localdomain ovs-vsctl[22030]:
ovs|00001|vsctl|INFO|Called as ovs-vsctl --dry-run del-port br-int ovn-25cc77-0
The stranger part to me is the log output:
[root@ovirt1 openvswitch]# grep ovn-25cc77-0 /var/log/openvswitch/*.log
/var/log/openvswitch/ovs-vswitchd.log:2019-12-12T01:26:28.642Z|00032|bridge|INFO|bridge
br-int: added interface ovn-25cc77-0 on port 14
/var/log/openvswitch/ovs-vswitchd.log:2019-12-12T01:45:15.646Z|00113|bridge|INFO|bridge
br-int: deleted interface ovn-25cc77-0 on port 14
/var/log/openvswitch/ovs-vswitchd.log:2019-12-12T01:45:15.861Z|00116|bridge|INFO|bridge
br-int: added interface ovn-25cc77-0 on port 2
/var/log/openvswitch/ovs-vswitchd.log:2019-12-12T01:50:36.678Z|00118|bridge|INFO|bridge
br-int: deleted interface ovn-25cc77-0 on port 2
/var/log/openvswitch/ovs-vswitchd.log:2019-12-12T01:52:31.180Z|00121|bridge|INFO|bridge
br-int: added interface ovn-25cc77-0 on port 3
/var/log/openvswitch/ovs-vswitchd.log:2019-12-12T01:55:09.734Z|00125|bridge|INFO|bridge
br-int: deleted interface ovn-25cc77-0 on port 3
/var/log/openvswitch/ovs-vswitchd.log:2019-12-12T01:58:15.138Z|00127|bridge|INFO|bridge
br-int: added interface ovn-25cc77-0 on port 6
I'm also attaching the verbose output of the dryrun.
Thanks in advance.
Best Regards,Strahil Nikolov