On Tue, Mar 5, 2013 at 5:12 PM, Vinzenz Feenstra wrote:
Hi,
On 03/04/2013 06:59 PM, Gianluca Cecchi wrote:
One problem was setting where to put the .ini file.
For now I put it where the python is called and the service starts now.
But no ip and no applications are populated even after setting service to
auto and restart win7 vm.
Where to look for now?
Do you have the virtio-serial drivers installed?
If not please do so.
Otherwise you might try to restart vdsmd on the host.
Thanks
Gianluca
Tomorrow I should be able to collect those infos for w7 guest.
In the mean time I did the same for a Windows XP vm in another
environment (all-in-one 3.2 repo for f18)
I was able to start the service, virtio serial device is present in
hardware devices.
As soon as I start the service I can see IP and list of applications
in webadmin gui for the VM (no need to restart vdsmd).
A problem regards how ip is shown: two times + an entry of the form 0.0.0.0 ...
See screenshot:
https://docs.google.com/file/d/0BwoPbcrMv8mvcEdKTy1tdFV1TEk/edit?usp=sharing
But even with shutdown and power off of the vm and then starting it, I
can't see any wan option in user portal.
Also tried here to restart vdsmd.
Here the rhev-agent.log generated on winxp guest:
https://docs.google.com/file/d/0BwoPbcrMv8mvRUlQYjNYTXpORTQ/edit?usp=sharing
Here you can find vdsm.log. The service was set to automatic and the
VM was powered on around 00:27
https://docs.google.com/file/d/0BwoPbcrMv8mvUXJhSzlWVXA3RWM/edit?usp=sharing
NOTE to correlate between VM and host that VM time is about 13 hours
behind host time, for another problem I'm going to send eventually a
separate e-mail
(by default I notice template/VM is created with timezone -12 and I'm
in +1.... and it seems I cannot change it afterwards...)
BTW: how can I configure the service so that log file is not in
C:\Python26\Lib\site-packages\win32
but inside a directory of my choice?
In general can I proceed this way for the service, to put it and its
files in a dedicated directory:
- Update the AGENT_CONFIG global variable in OVirtGuestService.py to
point to C:\ovirt-guest-agent
- update a tbd file to set logile as C:\ovirt-guest-agent\ovirt-guest-agent.log
- build
- put OVirtGuestService.py and ... what? (OVirtGuestService.pyc?
other files?) in C:\ovirt-guest-agent
- put ovirt-guest-agent.ini in C:\ovirt-guest-agent
- cd C:\ovirt-guest-agent
- python OVirtGuestService.py install
- net start OVirtGuestService
- run services.msc and set the service to auto
?