9:28 a.m.
On Thu, Oct 22, 2015 at 3:01 PM, Simone Tiraboschi <stirabos(a)redhat.com>
wrote:
>
> Any particular file or section in log files to cross check?
> I can also start from scratch in case.... just to be sure that I don't
> get into same problem, so that it can be useful to find it before...
>
>
I suspect that that host-deploy fails cause you have in place a leftover
VDSM cert from the previous attempt which is still signed by your previous
attempt engine and so it fails to match this new engine: on the second
attempt hosted-engine-setup deployed again the engine appliance creating a
new instance with different certs.
I decided to restart clean and in fact all went well.
Last lines of output of "hosted-engine --deploy"
...
[ INFO ] Connecting to the Engine
[ INFO ] Waiting for the host to become operational in the engine. This
may take several minutes...
[ INFO ] Still waiting for VDSM host to become operational...
[ INFO ] The VDSM Host is now operational
[ INFO ] Saving hosted-engine configuration on the shared storage domain
[ INFO ] Shutting down the engine VM
[ INFO ] Enabling and starting HA services
Hosted Engine successfully set up
[ INFO ] Stage: Clean up
[ INFO ] Generating answer file
'/var/lib/ovirt-hosted-engine-setup/answers/answers-20151022160359.conf'
[ INFO ] Generating answer file '/etc/ovirt-hosted-engine/answers.conf'
[ INFO ] Stage: Pre-termination
[ INFO ] Stage: Termination
engine is up and admin web portal accessible and host results up.
I expected storage to be configured inside admin web portal but apparently
I don't see anything already configured and also I don't see the sh engine
VM listed... is it correct?
Filesystem layout at this time on the hypervisor is this:
[root@ovc71 tmp]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/centos-root 27G 2.7G 24G 11% /
devtmpfs 3.9G 0 3.9G 0% /dev
tmpfs 3.9G 4.0K 3.9G 1% /dev/shm
tmpfs 3.9G 8.7M 3.9G 1% /run
tmpfs 3.9G 0 3.9G 0% /sys/fs/cgroup
/dev/sda1 497M 130M 368M 27% /boot
/dev/mapper/OVIRT_DOMAIN-ISO_DOMAIN 5.0G 33M 5.0G 1% /ISO_DOMAIN
/dev/mapper/OVIRT_DOMAIN-NFS_DOMAIN 45G 2.7G 43G 6% /NFS_DOMAIN
ovc71.localdomain.local:/NFS_DOMAIN 45G 2.7G 43G 6%
/rhev/data-center/mnt/ovc71.localdomain.local:_NFS__DOMAIN
/dev/loop1 2.0G 3.1M 1.9G 1%
/rhev/data-center/mnt/_var_lib_ovirt-hosted-engine-setup_tmpUEso__Q
BTW: what is the 2Gb file system on loop device?
I configured the storage domain part as NFS, pointing
to ovc71.localdomain.local:/NFS_DOMAIN
Reading page at
http://www.ovirt.org/Features/Self_Hosted_Engine
it is not clear to me what to do next if I want for example keep a single
host with its sh engine as a replacement concept of what before was
all-in-one... and start creating VMs....
Output of my web admin page:
https://drive.google.com/file/d/0BwoPbcrMv8mva3UyMTFDbHdsN3c/view?usp=sha...
Also, I didn't restart my hypervisor yet.
WHat should be the shutdown procedure? SImply run shutdown on hypervisor or
1) shutdwn engine vm
2) shutdown hypervisor
?
Gianluca