Bonjour Nathanael, You haven't mentioned which version of oVirt you were using - I suspect it's pre-3.5 and therefore this isn't fixed yet: https://bugzilla.redhat.com/show_bug.cgi?id=1114085
From 3.5 onwards the warning should not appear for a bond (in aggregating mode) if only one of its slaves is overloaded.
A bientot, Lior. On 18/03/15 18:17, Nathanaël Blanchet wrote:
Hi all,
I'm used to create a mode 4 bond0 interface with two 1 Gb/s interfaces on all my hosts, and ethtool bond0 gives me a functionnal 2000Mb/s. However, when importing a vm from the export domain (NFS with a speed of 4GB/s), I always have this alert: "Host siple has network interface which exceeded the defined threshold [95%] (em3: transmit rate[0%], receive rate [100%])" It seems that the second nic never works while the first one is overloaded. Is it an expected behaviour? I believed that the flow was balanced between the two interfaces in 802.3ad mode.
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users