7:29 p.m.
Hi Kaushal,
Thanks for the detailed reply....let me explain my setup first :-
1. Ovirt Engine
2. 4* host as well as storage machine (Host and gluster combined)
3. Every host has 24 bricks...
Now whenever the host machine reboot...it can come up but can not join the
cluster again and through the following error "Gluster command [<UNKNOWN>]
failed on server.."
Please check my comment in line :-
1. Use the same string for doing the peer probe and for the brick address
during volume create/add-brick. Ideally, we suggest you use properly
resolvable FQDNs everywhere. If that is not possible, then use only IP
addresses. Try to avoid short names.
---------------
[root@cpu05 ~]# gluster peer status
Number of Peers: 3
Hostname: cpu03.stack.com
Uuid: 5729b8c4-e80d-4353-b456-6f467bddbdfb
State: Peer in Cluster (Connected)
Hostname: cpu04.stack.com
Uuid: d272b790-c4b2-4bed-ba68-793656e6d7b0
State: Peer in Cluster (Connected)
Other names:
10.10.0.8
Hostname: cpu02.stack.com
Uuid: 8d8a7041-950e-40d0-85f9-58d14340ca25
State: Peer in Cluster (Connected)
[root@cpu05 ~]#
----------------
2. During boot up, make sure to launch glusterd only after the network is
up. This will allow the new peer identification mechanism to do its
job correctly.
> I think the service itself doing the same job....
[root@cpu05 ~]# cat /usr/lib/systemd/system/glusterd.service
[Unit]
Description=GlusterFS, a clustered file-system server
After=network.target rpcbind.service
Before=network-online.target
[Service]
Type=forking
PIDFile=/var/run/glusterd.pid
LimitNOFILE=65536
ExecStart=/usr/sbin/glusterd -p /var/run/glusterd.pid
KillMode=process
[Install]
WantedBy=multi-user.target
[root@cpu05 ~]#
--------------------
gluster logs :-
[2014-11-24 09:22:22.147471] I [MSGID: 100030] [glusterfsd.c:2018:main]
0-/usr/sbin/glusterd: Started running /usr/sbin/glusterd version 3.6.1
(args: /usr/sbin/glusterd -p /var/run/glusterd.pid)
[2014-11-24 09:22:22.151565] I [glusterd.c:1214:init] 0-management: Maximum
allowed open file descriptors set to 65536
[2014-11-24 09:22:22.151599] I [glusterd.c:1259:init] 0-management: Using
/var/lib/glusterd as working directory
[2014-11-24 09:22:22.155216] W [rdma.c:4195:__gf_rdma_ctx_create]
0-rpc-transport/rdma: rdma_cm event channel creation failed (No such device)
[2014-11-24 09:22:22.155264] E [rdma.c:4483:init] 0-rdma.management: Failed
to initialize IB Device
[2014-11-24 09:22:22.155285] E [rpc-transport.c:333:rpc_transport_load]
0-rpc-transport: 'rdma' initialization failed
[2014-11-24 09:22:22.155354] W [rpcsvc.c:1524:rpcsvc_transport_create]
0-rpc-service: cannot create listener, initing the transport failed
[2014-11-24 09:22:22.156290] I
[glusterd.c:413:glusterd_check_gsync_present] 0-glusterd: geo-replication
module not installed in the system
[2014-11-24 09:22:22.161318] I
[glusterd-store.c:2043:glusterd_restore_op_version] 0-glusterd: retrieved
op-version: 30600
[2014-11-24 09:22:22.821800] I
[glusterd-handler.c:3146:glusterd_friend_add_from_peerinfo] 0-management:
connect returned 0
[2014-11-24 09:22:22.825810] I
[glusterd-handler.c:3146:glusterd_friend_add_from_peerinfo] 0-management:
connect returned 0
[2014-11-24 09:22:22.828705] I
[glusterd-handler.c:3146:glusterd_friend_add_from_peerinfo] 0-management:
connect returned 0
[2014-11-24 09:22:22.828771] I [rpc-clnt.c:969:rpc_clnt_connection_init]
0-management: setting frame-timeout to 600
[2014-11-24 09:22:22.832670] I [rpc-clnt.c:969:rpc_clnt_connection_init]
0-management: setting frame-timeout to 600
[2014-11-24 09:22:22.835919] I [rpc-clnt.c:969:rpc_clnt_connection_init]
0-management: setting frame-timeout to 600
[2014-11-24 09:22:22.840209] E
[glusterd-store.c:4248:glusterd_resolve_all_bricks] 0-glusterd: resolve
brick failed in restore
[2014-11-24 09:22:22.840233] E [xlator.c:425:xlator_init] 0-management:
Initialization of volume 'management' failed, review your volfile again
[2014-11-24 09:22:22.840245] E [graph.c:322:glusterfs_graph_init]
0-management: initializing translator failed
[2014-11-24 09:22:22.840264] E [graph.c:525:glusterfs_graph_activate]
0-graph: init failed
[2014-11-24 09:22:22.840754] W [glusterfsd.c:1194:cleanup_and_exit] (-->
0-: received signum (0), shutting down
Thanks,
Punit
On Wed, Nov 26, 2014 at 7:14 PM, Kaushal M <kshlmster(a)gmail.com> wrote:
Based on the logs I can guess that glusterd is being started before
the network has come up and that the addresses given to bricks do not
directly match the addresses used in during peer probe.
The gluster_after_reboot log has the line "[2014-11-25
06:46:09.972113] E [glusterd-store.c:2632:glusterd_resolve_all_bricks]
0-glusterd: resolve brick failed in restore".
Brick resolution fails when glusterd cannot match the address for the
brick, with one of the peers. Brick resolution happens in two phases,
1. We first try to identify the peer by performing string comparisions
with the brick address and the peer addresses (The peer names will be
the names/addresses that were given when the peer was probed).
2. If we don't find a match from step 1, we will then resolve all the
brick address and the peer addresses into addrinfo structs, and then
compare these structs to find a match. This process should generally
find a match if available. This will fail only if the network is not
up yet as we cannot resolve addresses.
The above steps are applicable only to glusterfs versions >=3.6. They
were introduced to reduce problems with peer identification, like the
one you encountered
Since both of the steps failed to find a match in one run, but
succeeded later, we can come to the conclusion that,
a) the bricks don't have the exact same string used in peer probe for
their addresses as step 1 failed, and
b) the network was not up in the initial run, as step 2 failed during
the initial run, but passed in the second run.
Please let me know if my conclusion is correct.
If it is, you can solve your problem in two ways.
1. Use the same string for doing the peer probe and for the brick
address during volume create/add-brick. Ideally, we suggest you use
properly resolvable FQDNs everywhere. If that is not possible, then
use only IP addresses. Try to avoid short names.
2. During boot up, make sure to launch glusterd only after the network
is up. This will allow the new peer identification mechanism to do its
job correctly.
If you have already followed these steps and yet still hit the
problem, then please provide more information (setup, logs, etc.). It
could be much different problem that you are facing.
~kaushal
On Wed, Nov 26, 2014 at 4:01 PM, Punit Dambiwal <hypunit(a)gmail.com> wrote:
> Is there any one can help on this ??
>
> Thanks,
> punit
>
> On Wed, Nov 26, 2014 at 9:42 AM, Punit Dambiwal <hypunit(a)gmail.com>
wrote:
>>
>> Hi,
>>
>> My Glusterfs version is :- glusterfs-3.6.1-1.el7
>>
>> On Wed, Nov 26, 2014 at 1:59 AM, Kanagaraj Mayilsamy <
kmayilsa(a)redhat.com>
>> wrote:
>>>
>>> [+Gluster-users(a)gluster.org]
>>>
>>> "Initialization of volume 'management' failed, review your
volfile
>>> again", glusterd throws this error when the service is started
automatically
>>> after the reboot. But the service is successfully started later
manually by
>>> the user.
>>>
>>> can somebody from gluster-users please help on this?
>>>
>>> glusterfs version: 3.5.1
>>>
>>> Thanks,
>>> Kanagaraj
>>>
>>> ----- Original Message -----
>>> > From: "Punit Dambiwal" <hypunit(a)gmail.com>
>>> > To: "Kanagaraj" <kmayilsa(a)redhat.com>
>>> > Cc: users(a)ovirt.org
>>> > Sent: Tuesday, November 25, 2014 7:24:45 PM
>>> > Subject: Re: [ovirt-users] Gluster command [<UNKNOWN>] failed on
>>> > server...
>>> >
>>> > Hi Kanagraj,
>>> >
>>> > Please check the attached log files....i didn't find any thing
>>> > special....
>>> >
>>> > On Tue, Nov 25, 2014 at 12:12 PM, Kanagaraj
<kmayilsa(a)redhat.com>
>>> > wrote:
>>> >
>>> > > Do you see any errors in
>>> > > /var/log/glusterfs/etc-glusterfs-glusterd.vol.log or vdsm.log
when
>>> > > the
>>> > > service is trying to start automatically after the reboot?
>>> > >
>>> > > Thanks,
>>> > > Kanagaraj
>>> > >
>>> > >
>>> > > On 11/24/2014 08:13 PM, Punit Dambiwal wrote:
>>> > >
>>> > > Hi Kanagaraj,
>>> > >
>>> > > Yes...once i will start the gluster service and then vdsmd
...the
>>> > > host
>>> > > can connect to cluster...but the question is why it's not
started
>>> > > even it
>>> > > has chkconfig enabled...
>>> > >
>>> > > I have tested it in two host cluster environment...(Centos 6.6
and
>>> > > centos 7.0) on both hypervisior cluster..it's failed to
reconnect
in
>>> > > to
>>> > > cluster after reboot....
>>> > >
>>> > > In both the environment glusterd enabled for next boot....but
it's
>>> > > failed with the same error....seems it's bug in either gluster
or
>>> > > Ovirt ??
>>> > >
>>> > > Please help me to find the workaround here if can not resolve
>>> > > it...as
>>> > > without this the Host machine can not connect after
reboot....that
>>> > > means
>>> > > engine will consider it as down and every time need to manually
start
>>> > > the
>>> > > gluster service and vdsmd... ??
>>> > >
>>> > > Thanks,
>>> > > Punit
>>> > >
>>> > > On Mon, Nov 24, 2014 at 10:20 PM, Kanagaraj
<kmayilsa(a)redhat.com>
>>> > > wrote:
>>> > >
>>> > >> From vdsm.log "error: Connection failed. Please check if
gluster
>>> > >> daemon
>>> > >> is operational."
>>> > >>
>>> > >> Starting glusterd service should fix this issue. 'service
glusterd
>>> > >> start'
>>> > >> But i am wondering why the glusterd was not started
automatically
>>> > >> after
>>> > >> the reboot.
>>> > >>
>>> > >> Thanks,
>>> > >> Kanagaraj
>>> > >>
>>> > >>
>>> > >>
>>> > >> On 11/24/2014 07:18 PM, Punit Dambiwal wrote:
>>> > >>
>>> > >> Hi Kanagaraj,
>>> > >>
>>> > >> Please find the attached VDSM logs :-
>>> > >>
>>> > >> ----------------
>>> > >> Thread-13::DEBUG::2014-11-24
>>> > >>
>>> > >>
21:41:17,182::resourceManager::977::Storage.ResourceManager.Owner::(cancelAll)
>>> > >> Owner.cancelAll requests {}
>>> > >> Thread-13::DEBUG::2014-11-24
>>> > >> 21:41:17,182::task::993::Storage.TaskManager.Task::(_decref)
>>> > >> Task=`1691d409-9b27-4585-8281-5ec26154367a`::ref 0 aborting
False
>>> > >> Thread-13::DEBUG::2014-11-24
>>> > >>
21:41:32,393::task::595::Storage.TaskManager.Task::(_updateState)
>>> > >> Task=`994c7bc3-a236-4d03-a732-e068c7ed9ed4`::moving from
state
init
>>> > >> ->
>>> > >> state preparing
>>> > >> Thread-13::INFO::2014-11-24
>>> > >> 21:41:32,393::logUtils::44::dispatcher::(wrapper) Run and
protect:
>>> > >> repoStats(options=None)
>>> > >> Thread-13::INFO::2014-11-24
>>> > >> 21:41:32,393::logUtils::47::dispatcher::(wrapper) Run and
protect:
>>> > >> repoStats, Return response: {}
>>> > >> Thread-13::DEBUG::2014-11-24
>>> > >> 21:41:32,393::task::1191::Storage.TaskManager.Task::(prepare)
>>> > >> Task=`994c7bc3-a236-4d03-a732-e068c7ed9ed4`::finished: {}
>>> > >> Thread-13::DEBUG::2014-11-24
>>> > >>
21:41:32,394::task::595::Storage.TaskManager.Task::(_updateState)
>>> > >> Task=`994c7bc3-a236-4d03-a732-e068c7ed9ed4`::moving from
state
>>> > >> preparing
>>> > >> ->
>>> > >> state finished
>>> > >> Thread-13::DEBUG::2014-11-24
>>> > >>
>>> > >>
21:41:32,394::resourceManager::940::Storage.ResourceManager.Owner::(releaseAll)
>>> > >> Owner.releaseAll requests {} resources {}
>>> > >> Thread-13::DEBUG::2014-11-24
>>> > >>
>>> > >>
21:41:32,394::resourceManager::977::Storage.ResourceManager.Owner::(cancelAll)
>>> > >> Owner.cancelAll requests {}
>>> > >> Thread-13::DEBUG::2014-11-24
>>> > >> 21:41:32,394::task::993::Storage.TaskManager.Task::(_decref)
>>> > >> Task=`994c7bc3-a236-4d03-a732-e068c7ed9ed4`::ref 0 aborting
False
>>> > >> Thread-13::DEBUG::2014-11-24
>>> > >> 21:41:41,550::BindingXMLRPC::1132::vds::(wrapper) client
>>> > >> [10.10.10.2]::call
>>> > >> getCapabilities with () {}
>>> > >> Thread-13::DEBUG::2014-11-24
>>> > >> 21:41:41,553::utils::738::root::(execCmd)
>>> > >> /sbin/ip route show to 0.0.0.0/0 table all (cwd None)
>>> > >> Thread-13::DEBUG::2014-11-24
>>> > >> 21:41:41,560::utils::758::root::(execCmd)
>>> > >> SUCCESS: <err> = ''; <rc> = 0
>>> > >> Thread-13::DEBUG::2014-11-24
>>> > >> 21:41:41,588::caps::728::root::(_getKeyPackages) rpm package
>>> > >> ('gluster-swift',) not found
>>> > >> Thread-13::DEBUG::2014-11-24
>>> > >> 21:41:41,592::caps::728::root::(_getKeyPackages) rpm package
>>> > >> ('gluster-swift-object',) not found
>>> > >> Thread-13::DEBUG::2014-11-24
>>> > >> 21:41:41,593::caps::728::root::(_getKeyPackages) rpm package
>>> > >> ('gluster-swift-plugin',) not found
>>> > >> Thread-13::DEBUG::2014-11-24
>>> > >> 21:41:41,598::caps::728::root::(_getKeyPackages) rpm package
>>> > >> ('gluster-swift-account',) not found
>>> > >> Thread-13::DEBUG::2014-11-24
>>> > >> 21:41:41,598::caps::728::root::(_getKeyPackages) rpm package
>>> > >> ('gluster-swift-proxy',) not found
>>> > >> Thread-13::DEBUG::2014-11-24
>>> > >> 21:41:41,598::caps::728::root::(_getKeyPackages) rpm package
>>> > >> ('gluster-swift-doc',) not found
>>> > >> Thread-13::DEBUG::2014-11-24
>>> > >> 21:41:41,599::caps::728::root::(_getKeyPackages) rpm package
>>> > >> ('gluster-swift-container',) not found
>>> > >> Thread-13::DEBUG::2014-11-24
>>> > >> 21:41:41,599::caps::728::root::(_getKeyPackages) rpm package
>>> > >> ('glusterfs-geo-replication',) not found
>>> > >> Thread-13::DEBUG::2014-11-24
21:41:41,600::caps::646::root::(get)
>>> > >> VirtioRNG DISABLED: libvirt version 0.10.2-29.el6_5.9 required
>=
>>> > >> 0.10.2-31
>>> > >> Thread-13::DEBUG::2014-11-24
>>> > >> 21:41:41,603::BindingXMLRPC::1139::vds::(wrapper) return
>>> > >> getCapabilities
>>> > >> with {'status': {'message': 'Done',
'code': 0}, 'info':
>>> > >> {'HBAInventory':
>>> > >> {'iSCSI': [{'InitiatorName':
>>> > >> 'iqn.1994-05.com.redhat:32151ce183c8'}],
>>> > >> 'FC':
>>> > >> []}, 'packages2': {'kernel':
{'release': '431.el6.x86_64',
>>> > >> 'buildtime':
>>> > >> 1385061309.0, 'version': '2.6.32'},
'glusterfs-rdma': {'release':
>>> > >> '1.el6',
>>> > >> 'buildtime': 1403622628L, 'version':
'3.5.1'}, 'glusterfs-fuse':
>>> > >> {'release': '1.el6', 'buildtime':
1403622628L, 'version':
'3.5.1'},
>>> > >> 'spice-server': {'release':
'6.el6_5.2', 'buildtime': 1402324637L,
>>> > >> 'version': '0.12.4'}, 'vdsm':
{'release': '1.gitdb83943.el6',
>>> > >> 'buildtime':
>>> > >> 1412784567L, 'version': '4.16.7'},
'qemu-kvm': {'release':
>>> > >> '2.415.el6_5.10', 'buildtime': 1402435700L,
'version':
'0.12.1.2'},
>>> > >> 'qemu-img': {'release':
'2.415.el6_5.10', 'buildtime':
1402435700L,
>>> > >> 'version': '0.12.1.2'}, 'libvirt':
{'release': '29.el6_5.9',
>>> > >> 'buildtime':
>>> > >> 1402404612L, 'version': '0.10.2'},
'glusterfs': {'release':
'1.el6',
>>> > >> 'buildtime': 1403622628L, 'version':
'3.5.1'}, 'mom': {'release':
>>> > >> '2.el6',
>>> > >> 'buildtime': 1403794344L, 'version':
'0.4.1'}, 'glusterfs-server':
>>> > >> {'release': '1.el6', 'buildtime':
1403622628L, 'version':
'3.5.1'}},
>>> > >> 'numaNodeDistance': {'1': [20, 10],
'0': [10, 20]}, 'cpuModel':
>>> > >> 'Intel(R)
>>> > >> Xeon(R) CPU X5650 @ 2.67GHz',
'liveMerge': 'false',
>>> > >> 'hooks':
>>> > >> {},
>>> > >> 'cpuSockets': '2', 'vmTypes':
['kvm'], 'selinux': {'mode': '1'},
>>> > >> 'kdumpStatus': 0, 'supportedProtocols':
['2.2', '2.3'],
'networks':
>>> > >> {'ovirtmgmt': {'iface': u'bond0.10',
'addr': '43.252.176.16',
>>> > >> 'bridged':
>>> > >> False, 'ipv6addrs':
['fe80::62eb:69ff:fe20:b46c/64'], 'mtu':
'1500',
>>> > >> 'bootproto4': 'none', 'netmask':
'255.255.255.0', 'ipv4addrs': ['
>>> > >> 43.252.176.16/24' <http://43.252.176.16/24%27>],
'interface':
>>> > >> u'bond0.10', 'ipv6gateway': '::',
'gateway': '43.25.17.1'},
>>> > >> 'Internal':
>>> > >> {'iface': 'Internal', 'addr':
'', 'cfg': {'DEFROUTE': 'no',
>>> > >> 'HOTPLUG':
>>> > >> 'no', 'MTU': '9000', 'DELAY':
'0', 'NM_CONTROLLED': 'no',
>>> > >> 'BOOTPROTO':
>>> > >> 'none', 'STP': 'off',
'DEVICE': 'Internal', 'TYPE': 'Bridge',
>>> > >> 'ONBOOT':
>>> > >> 'no'}, 'bridged': True, 'ipv6addrs':
>>> > >> ['fe80::210:18ff:fecd:daac/64'],
>>> > >> 'gateway': '', 'bootproto4':
'none', 'netmask': '', 'stp': 'off',
>>> > >> 'ipv4addrs': [], 'mtu': '9000',
'ipv6gateway': '::', 'ports':
>>> > >> ['bond1.100']}, 'storage': {'iface':
u'bond1', 'addr':
'10.10.10.6',
>>> > >> 'bridged': False, 'ipv6addrs':
['fe80::210:18ff:fecd:daac/64'],
>>> > >> 'mtu':
>>> > >> '9000', 'bootproto4': 'none',
'netmask': '255.255.255.0',
>>> > >> 'ipv4addrs': ['
>>> > >> 10.10.10.6/24' <http://10.10.10.6/24%27>],
'interface': u'bond1',
>>> > >> 'ipv6gateway': '::', 'gateway':
''}, 'VMNetwork': {'iface':
>>> > >> 'VMNetwork',
>>> > >> 'addr': '', 'cfg':
{'DEFROUTE': 'no', 'HOTPLUG': 'no', 'MTU':
>>> > >> '1500',
>>> > >> 'DELAY': '0', 'NM_CONTROLLED':
'no', 'BOOTPROTO': 'none', 'STP':
>>> > >> 'off',
>>> > >> 'DEVICE': 'VMNetwork', 'TYPE':
'Bridge', 'ONBOOT': 'no'},
'bridged':
>>> > >> True,
>>> > >> 'ipv6addrs': ['fe80::62eb:69ff:fe20:b46c/64'],
'gateway': '',
>>> > >> 'bootproto4':
>>> > >> 'none', 'netmask': '', 'stp':
'off', 'ipv4addrs': [], 'mtu':
'1500',
>>> > >> 'ipv6gateway': '::', 'ports':
['bond0.36']}}, 'bridges':
>>> > >> {'Internal':
>>> > >> {'addr': '', 'cfg':
{'DEFROUTE': 'no', 'HOTPLUG': 'no', 'MTU':
>>> > >> '9000',
>>> > >> 'DELAY': '0', 'NM_CONTROLLED':
'no', 'BOOTPROTO': 'none', 'STP':
>>> > >> 'off',
>>> > >> 'DEVICE': 'Internal', 'TYPE':
'Bridge', 'ONBOOT': 'no'},
>>> > >> 'ipv6addrs':
>>> > >> ['fe80::210:18ff:fecd:daac/64'], 'mtu':
'9000', 'netmask': '',
>>> > >> 'stp':
>>> > >> 'off', 'ipv4addrs': [], 'ipv6gateway':
'::', 'gateway': '',
'opts':
>>> > >> {'topology_change_detected': '0',
'multicast_last_member_count':
>>> > >> '2',
>>> > >> 'hash_elasticity': '4',
'multicast_query_response_interval':
'999',
>>> > >> 'multicast_snooping': '1',
'multicast_startup_query_interval':
>>> > >> '3124',
>>> > >> 'hello_timer': '31',
'multicast_querier_interval': '25496',
>>> > >> 'max_age':
>>> > >> '1999', 'hash_max': '512',
'stp_state': '0', 'root_id':
>>> > >> '8000.001018cddaac', 'priority':
'32768',
>>> > >> 'multicast_membership_interval':
>>> > >> '25996', 'root_path_cost': '0',
'root_port': '0',
>>> > >> 'multicast_querier':
>>> > >> '0',
>>> > >> 'multicast_startup_query_count': '2',
'hello_time': '199',
>>> > >> 'topology_change': '0', 'bridge_id':
'8000.001018cddaac',
>>> > >> 'topology_change_timer': '0',
'ageing_time': '29995', 'gc_timer':
>>> > >> '31',
>>> > >> 'group_addr': '1:80:c2:0:0:0',
'tcn_timer': '0',
>>> > >> 'multicast_query_interval': '12498',
>>> > >> 'multicast_last_member_interval':
>>> > >> '99', 'multicast_router': '1',
'forward_delay': '0'}, 'ports':
>>> > >> ['bond1.100']}, 'VMNetwork': {'addr':
'', 'cfg': {'DEFROUTE':
'no',
>>> > >> 'HOTPLUG': 'no', 'MTU':
'1500', 'DELAY': '0', 'NM_CONTROLLED':
'no',
>>> > >> 'BOOTPROTO': 'none', 'STP':
'off', 'DEVICE': 'VMNetwork', 'TYPE':
>>> > >> 'Bridge',
>>> > >> 'ONBOOT': 'no'}, 'ipv6addrs':
['fe80::62eb:69ff:fe20:b46c/64'],
>>> > >> 'mtu':
>>> > >> '1500', 'netmask': '', 'stp':
'off', 'ipv4addrs': [],
'ipv6gateway':
>>> > >> '::',
>>> > >> 'gateway': '', 'opts':
{'topology_change_detected': '0',
>>> > >> 'multicast_last_member_count': '2',
'hash_elasticity': '4',
>>> > >> 'multicast_query_response_interval': '999',
'multicast_snooping':
>>> > >> '1',
>>> > >> 'multicast_startup_query_interval': '3124',
'hello_timer': '131',
>>> > >> 'multicast_querier_interval': '25496',
'max_age': '1999',
>>> > >> 'hash_max':
>>> > >> '512', 'stp_state': '0',
'root_id': '8000.60eb6920b46c',
'priority':
>>> > >> '32768', 'multicast_membership_interval':
'25996',
'root_path_cost':
>>> > >> '0',
>>> > >> 'root_port': '0', 'multicast_querier':
'0',
>>> > >> 'multicast_startup_query_count': '2',
'hello_time': '199',
>>> > >> 'topology_change': '0', 'bridge_id':
'8000.60eb6920b46c',
>>> > >> 'topology_change_timer': '0',
'ageing_time': '29995', 'gc_timer':
>>> > >> '31',
>>> > >> 'group_addr': '1:80:c2:0:0:0',
'tcn_timer': '0',
>>> > >> 'multicast_query_interval': '12498',
>>> > >> 'multicast_last_member_interval':
>>> > >> '99', 'multicast_router': '1',
'forward_delay': '0'}, 'ports':
>>> > >> ['bond0.36']}}, 'uuid':
'44454C4C-4C00-1057-8053-B7C04F504E31',
>>> > >> 'lastClientIface': 'bond1', 'nics':
{'eth3': {'permhwaddr':
>>> > >> '00:10:18:cd:da:ae', 'addr': '',
'cfg': {'SLAVE': 'yes',
>>> > >> 'NM_CONTROLLED':
>>> > >> 'no', 'MTU': '9000', 'HWADDR':
'00:10:18:cd:da:ae', 'MASTER':
>>> > >> 'bond1',
>>> > >> 'DEVICE': 'eth3', 'ONBOOT':
'no'}, 'ipv6addrs': [], 'mtu': '9000',
>>> > >> 'netmask': '', 'ipv4addrs': [],
'hwaddr': '00:10:18:cd:da:ac',
>>> > >> 'speed':
>>> > >> 1000}, 'eth2': {'permhwaddr':
'00:10:18:cd:da:ac', 'addr': '',
>>> > >> 'cfg':
>>> > >> {'SLAVE': 'yes', 'NM_CONTROLLED':
'no', 'MTU': '9000', 'HWADDR':
>>> > >> '00:10:18:cd:da:ac', 'MASTER':
'bond1', 'DEVICE': 'eth2',
'ONBOOT':
>>> > >> 'no'},
>>> > >> 'ipv6addrs': [], 'mtu': '9000',
'netmask': '', 'ipv4addrs': [],
>>> > >> 'hwaddr':
>>> > >> '00:10:18:cd:da:ac', 'speed': 1000},
'eth1': {'permhwaddr':
>>> > >> '60:eb:69:20:b4:6d', 'addr': '',
'cfg': {'SLAVE': 'yes',
>>> > >> 'NM_CONTROLLED':
>>> > >> 'no', 'MTU': '1500', 'HWADDR':
'60:eb:69:20:b4:6d', 'MASTER':
>>> > >> 'bond0',
>>> > >> 'DEVICE': 'eth1', 'ONBOOT':
'yes'}, 'ipv6addrs': [], 'mtu':
'1500',
>>> > >> 'netmask': '', 'ipv4addrs': [],
'hwaddr': '60:eb:69:20:b4:6c',
>>> > >> 'speed':
>>> > >> 1000}, 'eth0': {'permhwaddr':
'60:eb:69:20:b4:6c', 'addr': '',
>>> > >> 'cfg':
>>> > >> {'SLAVE': 'yes', 'NM_CONTROLLED':
'no', 'MTU': '1500', 'HWADDR':
>>> > >> '60:eb:69:20:b4:6c', 'MASTER':
'bond0', 'DEVICE': 'eth0',
'ONBOOT':
>>> > >> 'yes'},
>>> > >> 'ipv6addrs': [], 'mtu': '1500',
'netmask': '', 'ipv4addrs': [],
>>> > >> 'hwaddr':
>>> > >> '60:eb:69:20:b4:6c', 'speed': 1000}},
'software_revision': '1',
>>> > >> 'clusterLevels': ['3.0', '3.1',
'3.2', '3.3', '3.4', '3.5'],
>>> > >> 'cpuFlags':
>>> > >>
>>> > >>
u'fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,pdpe1gb,rdtscp,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,xtopology,nonstop_tsc,pni,pclmulqdq,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,pcid,dca,sse4_1,sse4_2,popcnt,aes,lahf_lm,tpr_shadow,vnmi,flexpriority,ept,vpid,model_Nehalem,model_Conroe,model_coreduo,model_core2duo,model_Penryn,model_Westmere,model_n270',
>>> > >> 'ISCSIInitiatorName':
'iqn.1994-05.com.redhat:32151ce183c8',
>>> > >> 'netConfigDirty': 'False',
'supportedENGINEs': ['3.0', '3.1',
'3.2',
>>> > >> '3.3',
>>> > >> '3.4', '3.5'], 'autoNumaBalancing': 2,
'reservedMem': '321',
>>> > >> 'bondings':
>>> > >> {'bond4': {'addr': '', 'cfg':
{}, 'mtu': '1500', 'netmask': '',
>>> > >> 'slaves':
>>> > >> [], 'hwaddr': '00:00:00:00:00:00'},
'bond0': {'addr': '', 'cfg':
>>> > >> {'HOTPLUG': 'no', 'MTU':
'1500', 'NM_CONTROLLED': 'no',
>>> > >> 'BONDING_OPTS':
>>> > >> 'mode=4 miimon=100', 'DEVICE':
'bond0', 'ONBOOT': 'yes'},
>>> > >> 'ipv6addrs':
>>> > >> ['fe80::62eb:69ff:fe20:b46c/64'], 'mtu':
'1500', 'netmask': '',
>>> > >> 'ipv4addrs': [], 'hwaddr':
'60:eb:69:20:b4:6c', 'slaves': ['eth0',
>>> > >> 'eth1'],
>>> > >> 'opts': {'miimon': '100',
'mode': '4'}}, 'bond1': {'addr':
>>> > >> '10.10.10.6',
>>> > >> 'cfg': {'DEFROUTE': 'no',
'IPADDR': '10.10.10.6', 'HOTPLUG': 'no',
>>> > >> 'MTU':
>>> > >> '9000', 'NM_CONTROLLED': 'no',
'NETMASK': '255.255.255.0',
>>> > >> 'BOOTPROTO':
>>> > >> 'none', 'BONDING_OPTS': 'mode=4
miimon=100', 'DEVICE': 'bond1',
>>> > >> 'ONBOOT':
>>> > >> 'no'}, 'ipv6addrs':
['fe80::210:18ff:fecd:daac/64'], 'mtu':
'9000',
>>> > >> 'netmask': '255.255.255.0',
'ipv4addrs': ['10.10.10.6/24'
>>> > >> <http://10.10.10.6/24%27>], 'hwaddr':
'00:10:18:cd:da:ac',
'slaves':
>>> > >> ['eth2', 'eth3'], 'opts':
{'miimon': '100', 'mode': '4'}},
'bond2':
>>> > >> {'addr': '', 'cfg': {}, 'mtu':
'1500', 'netmask': '', 'slaves':
[],
>>> > >> 'hwaddr': '00:00:00:00:00:00'},
'bond3': {'addr': '', 'cfg': {},
>>> > >> 'mtu':
>>> > >> '1500', 'netmask': '',
'slaves': [], 'hwaddr':
>>> > >> '00:00:00:00:00:00'}},
>>> > >> 'software_version': '4.16', 'memSize':
'24019', 'cpuSpeed':
>>> > >> '2667.000',
>>> > >> 'numaNodes': {u'1': {'totalMemory':
'12288', 'cpus': [6, 7, 8, 9,
>>> > >> 10, 11,
>>> > >> 18, 19, 20, 21, 22, 23]}, u'0':
{'totalMemory': '12278', 'cpus':
[0,
>>> > >> 1, 2,
>>> > >> 3, 4, 5, 12, 13, 14, 15, 16, 17]}}, 'version_name':
'Snow Man',
>>> > >> 'vlans':
>>> > >> {'bond0.10': {'iface': 'bond0',
'addr': '43.25.17.16', 'cfg':
>>> > >> {'DEFROUTE':
>>> > >> 'yes', 'VLAN': 'yes',
'IPADDR': '43.25.17.16', 'HOTPLUG': 'no',
>>> > >> 'GATEWAY':
>>> > >> '43.25.17.1', 'NM_CONTROLLED': 'no',
'NETMASK': '255.255.255.0',
>>> > >> 'BOOTPROTO': 'none', 'DEVICE':
'bond0.10', 'MTU': '1500',
'ONBOOT':
>>> > >> 'yes'},
>>> > >> 'ipv6addrs': ['fe80::62eb:69ff:fe20:b46c/64'],
'vlanid': 10,
'mtu':
>>> > >> '1500',
>>> > >> 'netmask': '255.255.255.0',
'ipv4addrs': ['43.25.17.16/24']
>>> > >> <http://43.25.17.16/24%27%5D>}, 'bond0.36':
{'iface': 'bond0',
>>> > >> 'addr':
>>> > >> '', 'cfg': {'BRIDGE':
'VMNetwork', 'VLAN': 'yes', 'HOTPLUG': 'no',
>>> > >> 'MTU':
>>> > >> '1500', 'NM_CONTROLLED': 'no',
'DEVICE': 'bond0.36', 'ONBOOT':
>>> > >> 'no'},
>>> > >> 'ipv6addrs': ['fe80::62eb:69ff:fe20:b46c/64'],
'vlanid': 36,
'mtu':
>>> > >> '1500',
>>> > >> 'netmask': '', 'ipv4addrs': []},
'bond1.100': {'iface': 'bond1',
>>> > >> 'addr':
>>> > >> '', 'cfg': {'BRIDGE':
'Internal', 'VLAN': 'yes', 'HOTPLUG': 'no',
>>> > >> 'MTU':
>>> > >> '9000', 'NM_CONTROLLED': 'no',
'DEVICE': 'bond1.100', 'ONBOOT':
>>> > >> 'no'},
>>> > >> 'ipv6addrs': ['fe80::210:18ff:fecd:daac/64'],
'vlanid': 100,
'mtu':
>>> > >> '9000',
>>> > >> 'netmask': '', 'ipv4addrs': []}},
'cpuCores': '12', 'kvmEnabled':
>>> > >> 'true',
>>> > >> 'guestOverhead': '65', 'cpuThreads':
'24', 'emulatedMachines':
>>> > >> [u'rhel6.5.0', u'pc', u'rhel6.4.0',
u'rhel6.3.0', u'rhel6.2.0',
>>> > >> u'rhel6.1.0', u'rhel6.0.0',
u'rhel5.5.0', u'rhel5.4.4',
>>> > >> u'rhel5.4.0'],
>>> > >> 'operatingSystem': {'release':
'5.el6.centos.11.1', 'version':
'6',
>>> > >> 'name':
>>> > >> 'RHEL'}, 'lastClient': '10.10.10.2'}}
>>> > >> Thread-13::DEBUG::2014-11-24
>>> > >> 21:41:41,620::BindingXMLRPC::1132::vds::(wrapper) client
>>> > >> [10.10.10.2]::call
>>> > >> getHardwareInfo with () {}
>>> > >> Thread-13::DEBUG::2014-11-24
>>> > >> 21:41:41,621::BindingXMLRPC::1139::vds::(wrapper) return
>>> > >> getHardwareInfo
>>> > >> with {'status': {'message': 'Done',
'code': 0}, 'info':
>>> > >> {'systemProductName': 'CS24-TY',
'systemSerialNumber': '7LWSPN1',
>>> > >> 'systemFamily': 'Server',
'systemVersion': 'A00', 'systemUUID':
>>> > >> '44454c4c-4c00-1057-8053-b7c04f504e31',
'systemManufacturer':
>>> > >> 'Dell'}}
>>> > >> Thread-13::DEBUG::2014-11-24
>>> > >> 21:41:41,733::BindingXMLRPC::1132::vds::(wrapper) client
>>> > >> [10.10.10.2]::call
>>> > >> hostsList with () {} flowID [222e8036]
>>> > >> Thread-13::ERROR::2014-11-24
>>> > >> 21:41:44,753::BindingXMLRPC::1148::vds::(wrapper) vdsm
exception
>>> > >> occured
>>> > >> Traceback (most recent call last):
>>> > >> File "/usr/share/vdsm/rpc/BindingXMLRPC.py", line
1135, in
wrapper
>>> > >> res = f(*args, **kwargs)
>>> > >> File "/usr/share/vdsm/gluster/api.py", line 54, in
wrapper
>>> > >> rv = func(*args, **kwargs)
>>> > >> File "/usr/share/vdsm/gluster/api.py", line 251,
in hostsList
>>> > >> return {'hosts':
self.svdsmProxy.glusterPeerStatus()}
>>> > >> File "/usr/share/vdsm/supervdsm.py", line 50, in
__call__
>>> > >> return callMethod()
>>> > >> File "/usr/share/vdsm/supervdsm.py", line 48, in
<lambda>
>>> > >> **kwargs)
>>> > >> File "<string>", line 2, in
glusterPeerStatus
>>> > >> File
"/usr/lib64/python2.6/multiprocessing/managers.py", line
740,
>>> > >> in
>>> > >> _callmethod
>>> > >> raise convert_to_error(kind, result)
>>> > >> GlusterCmdExecFailedException: Command execution failed
>>> > >> error: Connection failed. Please check if gluster daemon is
>>> > >> operational.
>>> > >> return code: 1
>>> > >> Thread-13::DEBUG::2014-11-24
>>> > >>
21:41:50,949::task::595::Storage.TaskManager.Task::(_updateState)
>>> > >> Task=`c9042986-c978-4b08-adb2-616f5299e115`::moving from
state
init
>>> > >> ->
>>> > >> state preparing
>>> > >> Thread-13::INFO::2014-11-24
>>> > >> 21:41:50,950::logUtils::44::dispatcher::(wrapper) Run and
protect:
>>> > >> repoStats(options=None)
>>> > >> Thread-13::INFO::2014-11-24
>>> > >> 21:41:50,950::logUtils::47::dispatcher::(wrapper) Run and
protect:
>>> > >> repoStats, Return response: {}
>>> > >> Thread-13::DEBUG::2014-11-24
>>> > >> 21:41:50,950::task::1191::Storage.TaskManager.Task::(prepare)
>>> > >> Task=`c9042986-c978-4b08-adb2-616f5299e115`::finished: {}
>>> > >> Thread-13::DEBUG::2014-11-24
>>> > >>
21:41:50,950::task::595::Storage.TaskManager.Task::(_updateState)
>>> > >> Task=`c9042986-c978-4b08-adb2-616f5299e115`::moving from
state
>>> > >> preparing
>>> > >> ->
>>> > >> state finished
>>> > >> Thread-13::DEBUG::2014-11-24
>>> > >>
>>> > >>
21:41:50,951::resourceManager::940::Storage.ResourceManager.Owner::(releaseAll)
>>> > >> Owner.releaseAll requests {} resources {}
>>> > >> Thread-13::DEBUG::2014-11-24
>>> > >>
>>> > >>
21:41:50,951::resourceManager::977::Storage.ResourceManager.Owner::(cancelAll)
>>> > >> Owner.cancelAll requests {}
>>> > >> Thread-13::DEBUG::2014-11-24
>>> > >> 21:41:50,951::task::993::Storage.TaskManager.Task::(_decref)
>>> > >> Task=`c9042986-c978-4b08-adb2-616f5299e115`::ref 0 aborting
False
>>> > >> -------------------------------
>>> > >>
>>> > >> [root@compute4 ~]# service glusterd status
>>> > >> glusterd is stopped
>>> > >> [root@compute4 ~]# chkconfig --list | grep glusterd
>>> > >> glusterd 0:off 1:off 2:on 3:on 4:on 5:on
>>> > >> 6:off
>>> > >> [root@compute4 ~]#
>>> > >>
>>> > >> Thanks,
>>> > >> Punit
>>> > >>
>>> > >> On Mon, Nov 24, 2014 at 6:36 PM, Kanagaraj
<kmayilsa(a)redhat.com>
>>> > >> wrote:
>>> > >>
>>> > >>> Can you send the corresponding error in vdsm.log from the
host?
>>> > >>>
>>> > >>> Also check if glusterd service is running.
>>> > >>>
>>> > >>> Thanks,
>>> > >>> Kanagaraj
>>> > >>>
>>> > >>>
>>> > >>> On 11/24/2014 03:39 PM, Punit Dambiwal wrote:
>>> > >>>
>>> > >>> Hi,
>>> > >>>
>>> > >>> After reboot my Hypervisior host can not activate again
in the
>>> > >>> cluster
>>> > >>> and failed with the following error :-
>>> > >>>
>>> > >>> Gluster command [<UNKNOWN>] failed on server...
>>> > >>>
>>> > >>> Engine logs :-
>>> > >>>
>>> > >>> 2014-11-24 18:05:28,397 INFO
>>> > >>>
>>> > >>>
[org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand]
>>> > >>> (DefaultQuartzScheduler_Worker-64) START,
>>> > >>> GlusterVolumesListVDSCommand(HostName = Compute4, HostId
=
>>> > >>> 33648a90-200c-45ca-89d5-1ce305d79a6a), log id: 5f251c90
>>> > >>> 2014-11-24 18:05:30,609 INFO
>>> > >>>
>>> > >>>
[org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand]
>>> > >>> (DefaultQuartzScheduler_Worker-64) FINISH,
>>> > >>> GlusterVolumesListVDSCommand,
>>> > >>> return:
>>> > >>>
>>> > >>>
{26ae1672-ee09-4a38-8fd2-72dd9974cc2b=org.ovirt.engine.core.common.businessentities.gluster.GlusterVolumeEntity@d95203e0
},
>>> > >>> log id: 5f251c90
>>> > >>> 2014-11-24 18:05:33,768 INFO
>>> > >>> [org.ovirt.engine.core.bll.ActivateVdsCommand]
>>> > >>> (ajp--127.0.0.1-8702-8)
>>> > >>> [287d570d] Lock Acquired to object EngineLock
[exclusiveLocks=
key:
>>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a value: VDS
>>> > >>> , sharedLocks= ]
>>> > >>> 2014-11-24 18:05:33,795 INFO
>>> > >>> [org.ovirt.engine.core.bll.ActivateVdsCommand]
>>> > >>> (org.ovirt.thread.pool-8-thread-45) [287d570d] Running
command:
>>> > >>> ActivateVdsCommand internal: false. Entities affected :
ID:
>>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a Type: VDSAction
group
>>> > >>> MANIPULATE_HOST
>>> > >>> with role type ADMIN
>>> > >>> 2014-11-24 18:05:33,796 INFO
>>> > >>> [org.ovirt.engine.core.bll.ActivateVdsCommand]
>>> > >>> (org.ovirt.thread.pool-8-thread-45) [287d570d] Before
acquiring
>>> > >>> lock in
>>> > >>> order to prevent monitoring for host Compute5 from
data-center
>>> > >>> SV_WTC
>>> > >>> 2014-11-24 18:05:33,797 INFO
>>> > >>> [org.ovirt.engine.core.bll.ActivateVdsCommand]
>>> > >>> (org.ovirt.thread.pool-8-thread-45) [287d570d] Lock
acquired,
from
>>> > >>> now a
>>> > >>> monitoring of host will be skipped for host Compute5 from
>>> > >>> data-center
>>> > >>> SV_WTC
>>> > >>> 2014-11-24 18:05:33,817 INFO
>>> > >>> [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand]
>>> > >>> (org.ovirt.thread.pool-8-thread-45) [287d570d] START,
>>> > >>> SetVdsStatusVDSCommand(HostName = Compute5, HostId =
>>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a, status=Unassigned,
>>> > >>> nonOperationalReason=NONE, stopSpmFailureLogged=false),
log id:
>>> > >>> 1cbc7311
>>> > >>> 2014-11-24 18:05:33,820 INFO
>>> > >>> [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand]
>>> > >>> (org.ovirt.thread.pool-8-thread-45) [287d570d] FINISH,
>>> > >>> SetVdsStatusVDSCommand, log id: 1cbc7311
>>> > >>> 2014-11-24 18:05:34,086 INFO
>>> > >>> [org.ovirt.engine.core.bll.ActivateVdsCommand]
>>> > >>> (org.ovirt.thread.pool-8-thread-45) Activate finished.
Lock
>>> > >>> released.
>>> > >>> Monitoring can run now for host Compute5 from data-center
SV_WTC
>>> > >>> 2014-11-24 18:05:34,088 INFO
>>> > >>>
>>> > >>>
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
>>> > >>> (org.ovirt.thread.pool-8-thread-45) Correlation ID:
287d570d, Job
>>> > >>> ID:
>>> > >>> 5ef8e4d6-b2bc-469e-8e81-7ef74b2a001a, Call Stack: null,
Custom
>>> > >>> Event ID:
>>> > >>> -1, Message: Host Compute5 was activated by admin.
>>> > >>> 2014-11-24 18:05:34,090 INFO
>>> > >>> [org.ovirt.engine.core.bll.ActivateVdsCommand]
>>> > >>> (org.ovirt.thread.pool-8-thread-45) Lock freed to object
EngineLock
>>> > >>> [exclusiveLocks= key: 0bf6b00f-7947-4411-b55a-cc5eea2b381a
value:
>>> > >>> VDS
>>> > >>> , sharedLocks= ]
>>> > >>> 2014-11-24 18:05:35,792 INFO
>>> > >>>
>>> > >>>
[org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand]
>>> > >>> (DefaultQuartzScheduler_Worker-55) [3706e836] START,
>>> > >>> GlusterVolumesListVDSCommand(HostName = Compute4, HostId
=
>>> > >>> 33648a90-200c-45ca-89d5-1ce305d79a6a), log id: 48a0c832
>>> > >>> 2014-11-24 18:05:37,064 INFO
>>> > >>>
>>> > >>>
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetHardwareInfoVDSCommand]
>>> > >>> (DefaultQuartzScheduler_Worker-69) START,
>>> > >>> GetHardwareInfoVDSCommand(HostName = Compute5, HostId =
>>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a,
>>> > >>> vds=Host[Compute5,0bf6b00f-7947-4411-b55a-cc5eea2b381a]),
log id:
>>> > >>> 6d560cc2
>>> > >>> 2014-11-24 18:05:37,074 INFO
>>> > >>>
>>> > >>>
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetHardwareInfoVDSCommand]
>>> > >>> (DefaultQuartzScheduler_Worker-69) FINISH,
>>> > >>> GetHardwareInfoVDSCommand, log
>>> > >>> id: 6d560cc2
>>> > >>> 2014-11-24 18:05:37,093 WARN
>>> > >>> [org.ovirt.engine.core.vdsbroker.VdsManager]
>>> > >>> (DefaultQuartzScheduler_Worker-69) Host Compute5 is
running with
>>> > >>> disabled
>>> > >>> SELinux.
>>> > >>> 2014-11-24 18:05:37,127 INFO
>>> > >>>
>>> > >>>
[org.ovirt.engine.core.bll.HandleVdsCpuFlagsOrClusterChangedCommand]
>>> > >>> (DefaultQuartzScheduler_Worker-69) [2b4a51cf] Running
command:
>>> > >>> HandleVdsCpuFlagsOrClusterChangedCommand internal: true.
Entities
>>> > >>> affected
>>> > >>> : ID: 0bf6b00f-7947-4411-b55a-cc5eea2b381a Type: VDS
>>> > >>> 2014-11-24 18:05:37,147 INFO
>>> > >>>
>>> > >>>
[org.ovirt.engine.core.vdsbroker.gluster.GlusterServersListVDSCommand]
>>> > >>> (DefaultQuartzScheduler_Worker-69) [2b4a51cf] START,
>>> > >>> GlusterServersListVDSCommand(HostName = Compute5, HostId
=
>>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a), log id: 4faed87
>>> > >>> 2014-11-24 18:05:37,164 INFO
>>> > >>>
>>> > >>>
[org.ovirt.engine.core.vdsbroker.gluster.GlusterServersListVDSCommand]
>>> > >>> (DefaultQuartzScheduler_Worker-69) [2b4a51cf] FINISH,
>>> > >>> GlusterServersListVDSCommand, log id: 4faed87
>>> > >>> 2014-11-24 18:05:37,189 INFO
>>> > >>> [org.ovirt.engine.core.bll.SetNonOperationalVdsCommand]
>>> > >>> (DefaultQuartzScheduler_Worker-69) [4a84c4e5] Running
command:
>>> > >>> SetNonOperationalVdsCommand internal: true. Entities
affected :
>>> > >>> ID:
>>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a Type: VDS
>>> > >>> 2014-11-24 18:05:37,206 INFO
>>> > >>> [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand]
>>> > >>> (DefaultQuartzScheduler_Worker-69) [4a84c4e5] START,
>>> > >>> SetVdsStatusVDSCommand(HostName = Compute5, HostId =
>>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a,
status=NonOperational,
>>> > >>> nonOperationalReason=GLUSTER_COMMAND_FAILED,
>>> > >>> stopSpmFailureLogged=false),
>>> > >>> log id: fed5617
>>> > >>> 2014-11-24 18:05:37,209 INFO
>>> > >>> [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand]
>>> > >>> (DefaultQuartzScheduler_Worker-69) [4a84c4e5] FINISH,
>>> > >>> SetVdsStatusVDSCommand, log id: fed5617
>>> > >>> 2014-11-24 18:05:37,223 ERROR
>>> > >>>
>>> > >>>
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
>>> > >>> (DefaultQuartzScheduler_Worker-69) [4a84c4e5] Correlation
ID:
>>> > >>> 4a84c4e5,
>>> > >>> Job
>>> > >>> ID: 4bfd4a6d-c3ef-468f-a40e-a3a6ca13011b, Call Stack:
null,
Custom
>>> > >>> Event
>>> > >>> ID: -1, Message: Gluster command [<UNKNOWN>] failed
on server
>>> > >>> Compute5.
>>> > >>> 2014-11-24 18:05:37,243 INFO
>>> > >>>
>>> > >>>
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
>>> > >>> (DefaultQuartzScheduler_Worker-69) [4a84c4e5] Correlation
ID:
null,
>>> > >>> Call
>>> > >>> Stack: null, Custom Event ID: -1, Message: Status of host
Compute5
>>> > >>> was
>>> > >>> set
>>> > >>> to NonOperational.
>>> > >>> 2014-11-24 18:05:37,272 INFO
>>> > >>> [org.ovirt.engine.core.bll.HandleVdsVersionCommand]
>>> > >>> (DefaultQuartzScheduler_Worker-69) [a0c8a7f] Running
command:
>>> > >>> HandleVdsVersionCommand internal: true. Entities affected
: ID:
>>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a Type: VDS
>>> > >>> 2014-11-24 18:05:37,274 INFO
>>> > >>> [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo]
>>> > >>> (DefaultQuartzScheduler_Worker-69) [a0c8a7f] Host
>>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a : Compute5 is already
in
>>> > >>> NonOperational status for reason GLUSTER_COMMAND_FAILED.
>>> > >>> SetNonOperationalVds command is skipped.
>>> > >>> 2014-11-24 18:05:38,065 INFO
>>> > >>>
>>> > >>>
[org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand]
>>> > >>> (DefaultQuartzScheduler_Worker-55) [3706e836] FINISH,
>>> > >>> GlusterVolumesListVDSCommand, return:
>>> > >>>
>>> > >>>
{26ae1672-ee09-4a38-8fd2-72dd9974cc2b=org.ovirt.engine.core.common.businessentities.gluster.GlusterVolumeEntity@4e72a1b1
},
>>> > >>> log id: 48a0c832
>>> > >>> 2014-11-24 18:05:43,243 INFO
>>> > >>>
>>> > >>>
[org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand]
>>> > >>> (DefaultQuartzScheduler_Worker-35) START,
>>> > >>> GlusterVolumesListVDSCommand(HostName = Compute4, HostId
=
>>> > >>> 33648a90-200c-45ca-89d5-1ce305d79a6a), log id: 3ce13ebc
>>> > >>> ^C
>>> > >>> [root@ccr01 ~]#
>>> > >>>
>>> > >>> Thanks,
>>> > >>> Punit
>>> > >>>
>>> > >>>
>>> > >>> _______________________________________________
>>> > >>> Users mailing
>>> > >>>
listUsers@ovirt.orghttp://lists.ovirt.org/mailman/listinfo/users
>>> > >>>
>>> > >>>
>>> > >>>
>>> > >>
>>> > >>
>>> > >
>>> > >
>>> >
>>
>>
>
>
> _______________________________________________
> Gluster-users mailing list
> Gluster-users(a)gluster.org
> http://supercolony.gluster.org/mailman/listinfo/gluster-users