[ovirt-users]回复: Re: iSCSI multipath with separate subnets... still not possible in 4.4.x?

I saw through their administration panels that in Storage -> iScsi section there are also two targets with different subnets and the command on the host multipath -ll also showed the normal operation of the two targets. That's mean that: multipath can not create a logic LUN which using two subnet as it's concurrent path , and the LUN can not avoid failing of It's only IP path, is it ?? -----邮件原件----- 发件人: users-bounces(a)ovirt.org <users-bounces(a)ovirt.org&gt; 代表 Patrick Lomakin 发送时间: 2020年7月20日 16:04 收件人: users(a)ovirt.org 主题: [ovirt-users] Re: iSCSI multipath with separate subnets... still not possible in 4.4.x? I don't quite understand what multipath is, but when I deployed it in my iSCSI repository, only one ip address is specified when installing hosted-engine. However, in order to specify the second subnet, I went to my host portal where I was deploying the engine and added the second subnet in the Storage -> iSCSi targets section. It should be noted that the storage is connected to hosts directly. However, after that when adding subsequent hosts through the engine I saw through their administration panels that in Storage -> iScsi section there are also two targets with different subnets and the command on the host multipath -ll also showed the normal operation of the two targets. I hope this helps you in any way. _______________________________________________ Users mailing list -- users(a)ovirt.org To unsubscribe send an email to users-leave(a)ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/6XUZLGQVE2D...