Hi users, chou, Here's the output of the command cat /etc/yum.repos.d/ cat: /etc/yum.repos.d/: Is a directory cat /etc/yum.repos.d/* # CentOS-Base.repo # # The mirror system uses the connecting IP address of the client and the # update status of each mirror to pick mirrors that are updated to and # geographically close to the client. You should use this for CentOS updates # unless you are manually picking other mirrors. # # If the mirrorlist= does not work for you, as a fall back you can try the # remarked out baseurl= line instead. # # [base] name=CentOS-$releasever - Base mirrorlist= http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=os&infra=$infra #baseurl=http://mirror.centos.org/centos/$releasever/os/$basearch/ gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6 #released updates [updates] name=CentOS-$releasever - Updates mirrorlist= http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=updates&infra=$infra #baseurl=http://mirror.centos.org/centos/$releasever/updates/$basearch/ gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6 #additional packages that may be useful [extras] name=CentOS-$releasever - Extras mirrorlist= http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=extras&infra=$infra #baseurl=http://mirror.centos.org/centos/$releasever/extras/$basearch/ gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6 #additional packages that extend functionality of existing packages [centosplus] name=CentOS-$releasever - Plus mirrorlist= http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=centosplus&infra=$infra #baseurl=http://mirror.centos.org/centos/$releasever/centosplus/$basearch/ gpgcheck=1 enabled=0 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6 #contrib - packages by Centos Users [contrib] name=CentOS-$releasever - Contrib mirrorlist= http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=contrib&infra=$infra #baseurl=http://mirror.centos.org/centos/$releasever/contrib/$basearch/ gpgcheck=1 enabled=0 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6 # CentOS-Debug.repo # # The mirror system uses the connecting IP address of the client and the # update status of each mirror to pick mirrors that are updated to and # geographically close to the client. You should use this for CentOS updates # unless you are manually picking other mirrors. # # All debug packages from all the various CentOS-5 releases # are merged into a single repo, split by BaseArch # # Note: packages in the debuginfo repo are currently not signed # [base-debuginfo] name=CentOS-6 - Debuginfo baseurl=http://debuginfo.centos.org/6/$basearch/ gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-Debug-6 enabled=0 [fasttrack] name=CentOS-6 - fasttrack mirrorlist= http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=fasttrack&infra=$infra #baseurl=http://mirror.centos.org/centos/$releasever/fasttrack/$basearch/ gpgcheck=1 enabled=0 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6 # CentOS-Media.repo # # This repo can be used with mounted DVD media, verify the mount point for # CentOS-6. You can use this repo and yum to install items directly off the # DVD ISO that we release. # # To use this repo, put in your DVD and use it with the other repos too: # yum --enablerepo=c6-media [command] # # or for ONLY the media repo, do this: # # yum --disablerepo=\* --enablerepo=c6-media [command] [c6-media] name=CentOS-$releasever - Media baseurl=file:///media/CentOS/ file:///media/cdrom/ file:///media/cdrecorder/ gpgcheck=1 enabled=0 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6 # CentOS-Vault.repo # # CentOS Vault holds packages from previous releases within the same CentOS Version # these are packages obsoleted by the current release and should usually not # be used in production #----------------- [C6.0-base] name=CentOS-6.0 - Base baseurl=http://vault.centos.org/6.0/os/$basearch/ gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6 enabled=0 [C6.0-updates] name=CentOS-6.0 - Updates baseurl=http://vault.centos.org/6.0/updates/$basearch/ gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6 enabled=0 [C6.0-extras] name=CentOS-6.0 - Extras baseurl=http://vault.centos.org/6.0/extras/$basearch/ gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6 enabled=0 [C6.0-contrib] name=CentOS-6.0 - Contrib baseurl=http://vault.centos.org/6.0/contrib/$basearch/ gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6 enabled=0 [C6.0-centosplus] name=CentOS-6.0 - CentOSPlus baseurl=http://vault.centos.org/6.0/centosplus/$basearch/ gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6 enabled=0 #----------------- [C6.1-base] name=CentOS-6.1 - Base baseurl=http://vault.centos.org/6.1/os/$basearch/ gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6 enabled=0 [C6.1-updates] name=CentOS-6.1 - Updates baseurl=http://vault.centos.org/6.1/updates/$basearch/ gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6 enabled=0 [C6.1-extras] name=CentOS-6.1 - Extras baseurl=http://vault.centos.org/6.1/extras/$basearch/ gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6 enabled=0 [C6.1-contrib] name=CentOS-6.1 - Contrib baseurl=http://vault.centos.org/6.1/contrib/$basearch/ gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6 enabled=0 [C6.1-centosplus] name=CentOS-6.1 - CentOSPlus baseurl=http://vault.centos.org/6.1/centosplus/$basearch/ gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6 enabled=0 #----------------- [C6.2-base] name=CentOS-6.2 - Base baseurl=http://vault.centos.org/6.2/os/$basearch/ gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6 enabled=0 [C6.2-updates] name=CentOS-6.2 - Updates baseurl=http://vault.centos.org/6.2/updates/$basearch/ gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6 enabled=0 [C6.2-extras] name=CentOS-6.2 - Extras baseurl=http://vault.centos.org/6.2/extras/$basearch/ gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6 enabled=0 [C6.2-contrib] name=CentOS-6.2 - Contrib baseurl=http://vault.centos.org/6.2/contrib/$basearch/ gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6 enabled=0 [C6.2-centosplus] name=CentOS-6.2 - CentOSPlus baseurl=http://vault.centos.org/6.2/centosplus/$basearch/ gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6 enabled=0 #----------------- [C6.3-base] name=CentOS-6.3 - Base baseurl=http://vault.centos.org/6.3/os/$basearch/ gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6 enabled=0 [C6.3-updates] name=CentOS-6.3 - Updates baseurl=http://vault.centos.org/6.3/updates/$basearch/ gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6 enabled=0 [C6.3-extras] name=CentOS-6.3 - Extras baseurl=http://vault.centos.org/6.3/extras/$basearch/ gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6 enabled=0 [C6.3-contrib] name=CentOS-6.3 - Contrib baseurl=http://vault.centos.org/6.3/contrib/$basearch/ gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6 enabled=0 [C6.3-centosplus] name=CentOS-6.3 - CentOSPlus baseurl=http://vault.centos.org/6.3/centosplus/$basearch/ gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6 enabled=0 #----------------- [C6.4-base] name=CentOS-6.4 - Base baseurl=http://vault.centos.org/6.4/os/$basearch/ gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6 enabled=0 [C6.4-updates] name=CentOS-6.4 - Updates baseurl=http://vault.centos.org/6.4/updates/$basearch/ gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6 enabled=0 [C6.4-extras] name=CentOS-6.4 - Extras baseurl=http://vault.centos.org/6.4/extras/$basearch/ gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6 enabled=0 [C6.4-contrib] name=CentOS-6.4 - Contrib baseurl=http://vault.centos.org/6.4/contrib/$basearch/ gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6 enabled=0 [C6.4-centosplus] name=CentOS-6.4 - CentOSPlus baseurl=http://vault.centos.org/6.4/centosplus/$basearch/ gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6 enabled=0 #----------------- [C6.5-base] name=CentOS-6.5 - Base baseurl=http://vault.centos.org/6.5/os/$basearch/ gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6 enabled=0 [C6.5-updates] name=CentOS-6.5 - Updates baseurl=http://vault.centos.org/6.5/updates/$basearch/ gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6 enabled=0 [C6.5-extras] name=CentOS-6.5 - Extras baseurl=http://vault.centos.org/6.5/extras/$basearch/ gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6 enabled=0 [C6.5-contrib] name=CentOS-6.5 - Contrib baseurl=http://vault.centos.org/6.5/contrib/$basearch/ gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6 enabled=0 [C6.5-centosplus] name=CentOS-6.5 - CentOSPlus baseurl=http://vault.centos.org/6.5/centosplus/$basearch/ gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6 enabled=0 [epel] name=Extra Packages for Enterprise Linux 6 - $basearch #baseurl=http://download.fedoraproject.org/pub/epel/6/$basearch mirrorlist= https://mirrors.fedoraproject.org/metalink?repo=epel-6&arch=$basearch failovermethod=priority enabled=1 gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-6 [epel-debuginfo] name=Extra Packages for Enterprise Linux 6 - $basearch - Debug #baseurl=http://download.fedoraproject.org/pub/epel/6/$basearch/debug mirrorlist= https://mirrors.fedoraproject.org/metalink?repo=epel-debug-6&arch=$basearch failovermethod=priority enabled=0 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-6 gpgcheck=1 [epel-source] name=Extra Packages for Enterprise Linux 6 - $basearch - Source #baseurl=http://download.fedoraproject.org/pub/epel/6/SRPMS mirrorlist= https://mirrors.fedoraproject.org/metalink?repo=epel-source-6&arch=$basearch failovermethod=priority enabled=0 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-6 gpgcheck=1 [epel-testing] name=Extra Packages for Enterprise Linux 6 - Testing - $basearch #baseurl=http://download.fedoraproject.org/pub/epel/testing/6/$basearch mirrorlist= https://mirrors.fedoraproject.org/metalink?repo=testing-epel6&arch=$basearch failovermethod=priority enabled=0 gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-6 [epel-testing-debuginfo] name=Extra Packages for Enterprise Linux 6 - Testing - $basearch - Debug #baseurl= http://download.fedoraproject.org/pub/epel/testing/6/$basearch/debug mirrorlist= https://mirrors.fedoraproject.org/metalink?repo=testing-debug-epel6&arch=$basearch failovermethod=priority enabled=0 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-6 gpgcheck=1 [epel-testing-source] name=Extra Packages for Enterprise Linux 6 - Testing - $basearch - Source #baseurl=http://download.fedoraproject.org/pub/epel/testing/6/SRPMS mirrorlist= https://mirrors.fedoraproject.org/metalink?repo=testing-source-epel6&arch=$basearch failovermethod=priority enabled=0 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-6 gpgcheck=1 [ovirt-3.5-epel] name=Extra Packages for Enterprise Linux 6 - $basearch #baseurl=http://download.fedoraproject.org/pub/epel/6/$basearch mirrorlist= https://mirrors.fedoraproject.org/metalink?repo=epel-6&arch=$basearch failovermethod=priority enabled=1 includepkgs=epel-release,python-uinput,puppet,python-lockfile,python-cpopen,python-ordereddict,python-pthreading,python-inotify,python-argparse,novnc,python-ply,python-kitchen,python-daemon,python-websockify,livecd-tools,spice-html5,mom,python-IPy,python-ioprocess,ioprocess,rubygem-rgen gpgcheck=1 gpgkey=https://dl.fedoraproject.org/pub/epel/RPM-GPG-KEY-EPEL-6 [ovirt-3.5-jpackage-6.0-generic] name=JPackage 6.0, for generic mirrorlist= http://www.jpackage.org/mirrorlist.php?dist=generic&type=free&release=6.0 enabled=1 gpgcheck=1 includepkgs=dom4j,isorelax,jaxen,jdom,msv,msv-xsdlib,relaxngDatatype,servicemix-specs,tomcat5-servlet-2.4-api,ws-jaxme,xalan-j2,xml-commons,xml-commons-jaxp-1.2-apis,xml-commons-resolver11,xom,xpp2,xpp3,antlr3,stringtemplate gpgkey=http://www.jpackage.org/jpackage.asc [ovirt-3.5-glusterfs-epel] name=GlusterFS is a clustered file-system capable of scaling to several petabytes. baseurl= http://download.gluster.org/pub/gluster/glusterfs/LATEST/EPEL.repo/epel-$rel... enabled=1 skip_if_unavailable=1 gpgcheck=0 [ovirt-3.5-glusterfs-noarch-epel] name=GlusterFS is a clustered file-system capable of scaling to several petabytes. baseurl= http://download.gluster.org/pub/gluster/glusterfs/LATEST/EPEL.repo/epel-$rel... enabled=1 skip_if_unavailable=1 gpgcheck=0 [ovirt-3.5-patternfly1-noarch-epel] name=Copr repo for patternfly1 owned by patternfly baseurl= http://copr-be.cloud.fedoraproject.org/results/patternfly/patternfly1/epel-6... enabled=1 skip_if_unavailable=1 gpgcheck=0 [ovirt-3.5] name=Latest oVirt 3.5 Release #baseurl=http://resources.ovirt.org/pub/ovirt-3.5/rpm/el$releasever/ mirrorlist= http://resources.ovirt.org/pub/yum-repo/mirrorlist-ovirt-3.5-el$releasever enabled=1 skip_if_unavailable=1 gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-ovirt-3.5 On Fri, Nov 21, 2014 at 2:53 PM, Coffee Chou <coffee.zyr@gmail.com> wrote:
Hi, Sandvik you can run:
cat /etc/yum.repo.d/
2014-11-21 14:21 GMT+08:00 Sandvik Agustin <agustinsandvik@gmail.com>:
Hi,
The repo that I have use if http://plain.resources.ovirt.org/pub/yum-repo/ovirt-release35.rpm from this documentation http://www.ovirt.org/Quick_Start_Guide, because the repo that this documentation http://community.redhat.com/blog/2014/03/up-and-running-with-ovirt-3-4/ seems not working, http://ovirt.org/releases/ovirt-release.noarch.rpm sudo yum localinstall -y http://ovirt.org/releases/ovirt-release.noarch.rpm ------------------------------
This article originally appeared on community.redhat.com. Follow the community on Twitter at @redhatopen <https://twitter.com/redhatopen>, and find us on Facebook <https://www.facebook.com/redhatopen> and Google+ <https://plus.google.com/u/0/b/113258037797946990391/113258037797946990391/posts> . sudo yum localinstall -y http://ovirt.org/releases/ovirt-release.noarch.rpm ------------------------------
This article originally appeared on community.redhat.com. Follow the community on Twitter at @redhatopen <https://twitter.com/redhatopen>, and find us on Facebook <https://www.facebook.com/redhatopen> and Google+ <https://plus.google.com/u/0/b/113258037797946990391/113258037797946990391/posts> . sudo yum localinstall -y http://ovirt.org/releases/ovirt-release.noarch.rpm ------------------------------
This article originally appeared on community.redhat.com. Follow the community on Twitter at @redhatopen <https://twitter.com/redhatopen>, and find us on Facebook <https://www.facebook.com/redhatopen> and Google+ <https://plus.google.com/u/0/b/113258037797946990391/113258037797946990391/posts> .
On Fri, Nov 21, 2014 at 1:51 PM, Coffee Chou <coffee.zyr@gmail.com> wrote:
Hi, Sandvik I have read the engine.log, it shows: Cannot find a valid baseurl for repo: base
can you show me your repo?
2014-11-21 12:21 GMT+08:00 Sandvik Agustin <agustinsandvik@gmail.com>:
Hi,
I'm sorry I forgot, here's the attachement.
On Fri, Nov 21, 2014 at 12:19 PM, Sandvik Agustin < agustinsandvik@gmail.com> wrote:
Hi,
I'm sorry I forgot, here's the attachement.
On Fri, Nov 21, 2014 at 12:17 PM, Coffee Chou <coffee.zyr@gmail.com> wrote:
Hi, Sandvik maybe you forgot to attach your log~ that's ovirt-hosted-engine-setup, so you can also attach your setup log:-)
2014-11-21 11:11 GMT+08:00 Sandvik Agustin <agustinsandvik@gmail.com> :
> Hi users, > > Chou, here's my I already tried your suggestion right now, but it > still failed, here's my engine.log and vdsm.log. and one more thing, since > the time that I started the installation of ovirt-hosted-engine setup, I > starting to have this kind of error message on my /var/log/message. > > > Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: table: 253:2: > multipath: error getting device > Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: ioctl: error adding > target to table > Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: table: 253:2: > multipath: error getting device > Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: ioctl: error adding > target to table > Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent) > Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, > can't remove > Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent) > Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, > can't remove > Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent) > Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, > can't remove > Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent) > Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, > can't remove > > > Thanks in advance > Sandvik > > On Fri, Nov 21, 2014 at 9:42 AM, Coffee Chou <coffee.zyr@gmail.com> > wrote: > >> Hi, Sandvik >> it's just a suggestion:-) >> >> i think you can have a try, as i don't know my solution worked >> or not. maybe there are some other people who have encountered this problem >> before and they can give you some advice:-) >> >> 2014-11-20 22:35 GMT+08:00 Sandvik Agustin < >> agustinsandvik@gmail.com>: >> >>> HI Chou, >>> >>> >>> Thanks, I will try your solution now, and should I resend this >>> email to users@ovirt.org? >>> >>> >>> Thanks >>> Sandvik >>> >>> On Thu, Nov 20, 2014 at 9:28 AM, Coffee Chou <coffee.zyr@gmail.com >>> > wrote: >>> >>>> Hi, Sandvik >>>> and please don't send the email to me only but to user mail >>>> list, so everybody can help you :-) >>>> >>>> 2014-11-20 9:17 GMT+08:00 Coffee Chou <coffee.zyr@gmail.com>: >>>> >>>>> Hi, Sandvik >>>>> i can see the ERROR message: Command returned failure code 1 >>>>> during SSH session .... you can try these: >>>>> >>>>> 1. stop firewall on the hosted_engine_1 >>>>> 2. running command: vdsm-tool configure >>>>> >>>>> if it's still failure, please attach your engine.log and >>>>> vdsm.log >>>>> >>>>> >>>>> >>>>> 2014-11-20 7:55 GMT+08:00 Sandvik Agustin < >>>>> agustinsandvik@gmail.com>: >>>>> >>>>>> Hi Chou, >>>>>> >>>>>> >>>>>> I have successfully install the hosted engine, but at the end >>>>>> of the installation I have this kind of error message >>>>>> >>>>>> To continue make a selection from the options below: >>>>>> (1) Continue setup - engine installation is complete >>>>>> (2) Power off and restart the VM >>>>>> (3) Abort setup >>>>>> >>>>>> (1, 2, 3)[1]: >>>>>> [ INFO ] Engine replied: DB Up!Welcome to Health Status! >>>>>> Enter the name of the cluster to which you want to >>>>>> add the host (Default) [Default]: >>>>>> [ INFO ] Waiting for the host to become operational in the >>>>>> engine. This may take several minutes... >>>>>> [ ERROR ] The VDSM host was found in a failed state. Please >>>>>> check engine and bootstrap installation logs. >>>>>> [ ERROR ] Unable to add hosted_engine_1 to the manager >>>>>> Please shutdown the VM allowing the system to launch >>>>>> it as a monitored service. >>>>>> The system will wait until the VM is down. >>>>>> [ INFO ] Enabling and starting HA services >>>>>> Hosted Engine successfully set up >>>>>> [ INFO ] Stage: Clean up >>>>>> [ INFO ] Generating answer file >>>>>> '/etc/ovirt-hosted-engine/answers.conf' >>>>>> [ INFO ] Answer file '/etc/ovirt-hosted-engine/answers.conf' >>>>>> has been updated >>>>>> [ INFO ] Stage: Pre-termination >>>>>> [ INFO ] Stage: Termination >>>>>> >>>>>> The ovirt webadmin is accessible, but my hosted_engine_1 status >>>>>> failed. I tried to activate it inside the webadmin, but it say's Error >>>>>> while executing action: >>>>>> >>>>>> hosted_engine_1: >>>>>> >>>>>> - Cannot activate Host. Host has no unique id. >>>>>> >>>>>> >>>>>> and when I try to reinstall it on the webadmin, nothing happen >>>>>> it still failed status. >>>>>> >>>>>> I hope you can help me. >>>>>> >>>>>> Please see attach for screenshot. >>>>>> >>>>>> >>>>>> Thanks in advance. >>>>>> sandvik >>>>>> >>>>>> On Wed, Nov 19, 2014 at 10:32 PM, Sandvik Agustin < >>>>>> agustinsandvik@gmail.com> wrote: >>>>>> >>>>>>> Hi guys, >>>>>>> >>>>>>> First of all I want to thank you for replying my email. >>>>>>> @Chou, yes I can access the engine webadmin. >>>>>>> @Chao, I've tried the no. 1 option and it worked, when I check >>>>>>> my /etc/hosts I have hostname conflict, then the ovirt engine is now >>>>>>> reachable, but there's another error message, it say's invalid certificate. >>>>>>> Is this because of I've put different FQDN during the installation process? >>>>>>> >>>>>>> On Wed, Nov 19, 2014 at 11:40 AM, Coffee Chou < >>>>>>> coffee.zyr@gmail.com> wrote: >>>>>>> >>>>>>>> Hi, Chao >>>>>>>> You may make a mistake, that's not my setup :-) >>>>>>>> But i don't think it's a problem of password. If the >>>>>>>> passwords were not the same, it will throw an ERROR of: >>>>>>>> [ ERROR ] Cannot automatically add the host to cluster None: >>>>>>>> HTTP Status 401 >>>>>>>> [ ERROR ] Failed to execute stage 'Closing up': Cannot add >>>>>>>> the host to cluster None >>>>>>>> >>>>>>>> >>>>>>>> so, i guess, maybe Sandvik's setup is still not >>>>>>>> accessable ? >>>>>>>> >>>>>>>> 2014-11-19 11:12 GMT+08:00 Xie, Chao < >>>>>>>> xiec.fnst@cn.fujitsu.com>: >>>>>>>> >>>>>>>> Hi, Chou >>>>>>>>> >>>>>>>>> It seems your rhevm is not setup successfully. I >>>>>>>>> suggest you can think about the two possible root cause below: >>>>>>>>> >>>>>>>>> 1. your /etc/hosts about host/rhevm-vm is >>>>>>>>> configured correctly? >>>>>>>>> >>>>>>>>> 2. your password set in hosted-engine –deploy and >>>>>>>>> rhevm-setup is same ? >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> If those are not your problem cause, Please provide more log >>>>>>>>> about it. >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> *发件人:* users-bounces@ovirt.org [mailto: >>>>>>>>> users-bounces@ovirt.org] *代表 *Coffee Chou >>>>>>>>> *发送时间:* 2014年11月19日 10:08 >>>>>>>>> *收件人:* Sandvik Agustin >>>>>>>>> *抄送:* users@ovirt.org >>>>>>>>> *主题:* Re: [ovirt-users] Engine is still unreachable >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> Hi, can you access Engine webadmin with this ERROR message? >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> 2014-11-18 19:45 GMT+08:00 Sandvik Agustin < >>>>>>>>> agustinsandvik@gmail.com>: >>>>>>>>> >>>>>>>>> Hi!, >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> I have install ovirt 3.4 on centos 6.6 following this >>>>>>>>> documentation >>>>>>>>> http://community.redhat.com/blog/2014/03/up-and-running-with-ovirt-3-4/ >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> I have already completed the installation of ovirt engine >>>>>>>>> inside of the vm, when going back to hosted-engine --deploy >>>>>>>>> terminal and choosing 1 the hosted-engine --deploy says: >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> (1, 2, 3)[1]: 1 >>>>>>>>> >>>>>>>>> [ ERROR ] Engine is still unreachable >>>>>>>>> >>>>>>>>> Engine health status page is not yet reachable. >>>>>>>>> >>>>>>>>> To continue make a selection from the options >>>>>>>>> below: >>>>>>>>> >>>>>>>>> (1) Continue setup - engine installation is >>>>>>>>> complete >>>>>>>>> >>>>>>>>> (2) Power off and restart the VM >>>>>>>>> >>>>>>>>> (3) Abort setup >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> what should I do? how to fix this? >>>>>>>>> >>>>>>>>> >>>>>>>>> Thanks in advance, >>>>>>>>> >>>>>>>>> sandvik >>>>>>>>> >>>>>>>>> >>>>>>>>> _______________________________________________ >>>>>>>>> Users mailing list >>>>>>>>> Users@ovirt.org >>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>> >>>>> >>>> >>> >> >