Also change NAME=em1
to:
DEVICE=em1
and remove the # from the BOOTPROTO=none
----- Original Message -----
From: "Michael Burman" <mburman(a)redhat.com>
To: "Lars Nielsen" <lars(a)steinwurf.com>
Cc: users(a)ovirt.org
Sent: Tuesday, January 13, 2015 4:48:55 PM
Subject: Re: [ovirt-users] Host in NonOperational mode ovirtmgmt network missing
Hi Lars
First of all you have to decide from where your ovirtmgmt getting the ip, if it is from a
dhcp server, you have to delete this lines from your ifcfg-ovirtmgmt file:
IPADDR=192.168.1.10
NETMASK=255.255.255.0
GATEWAY=192.168.0.1
and add the next line:
NM_CONTROLLED=no
- in the ifcfg-em1 file change:
BOOTPROTO=none
and add the line:
NM_CONTROLLED=no
restart your engine /etc/init.d/ovirt-engine restart and make sure your ovirtmgmt got ip
and you have a default gateway, you can run: route -n
Put your host in maintenance mode , try to activate or re-install.
Best regards,
Michael B
----- Original Message -----
From: "Lars Nielsen" <lars(a)steinwurf.com>
To: "Yedidyah Bar David" <didi(a)redhat.com>
Cc: users(a)ovirt.org
Sent: Tuesday, January 13, 2015 12:05:05 PM
Subject: Re: [ovirt-users] Host in NonOperational mode ovirtmgmt network missing
On 13/01/15 10:33, Yedidyah Bar David wrote:
> ----- Original Message -----
>> From: "Lars Nielsen"<lars(a)steinwurf.com>
>> To: "Yedidyah Bar David"<didi(a)redhat.com>
>> Cc:users@ovirt.org
>> Sent: Tuesday, January 13, 2015 11:26:55 AM
>> Subject: Re: [ovirt-users] Host in NonOperational mode ovirtmgmt network missing
>>
>>
>> On 13/01/15 09:31, Yedidyah Bar David wrote:
>>> ----- Original Message -----
>>>> From: "Lars Nielsen"<lars(a)steinwurf.com>
>>>> To:users@ovirt.org
>>>> Sent: Tuesday, January 13, 2015 10:20:20 AM
>>>> Subject: [ovirt-users] Host in NonOperational mode ovirtmgmt network
>>>> missing
>>>>
>>>> Hey I am new to oVirt, so please be patient
>>>>
>>>> I have a problem, when setting up new hosts.
>>>> Doing the setup it self no problem, but afterwards the status is set to
>>>> NonOperational.
>>>> Do to the network ovirtmgmt is missing on the machine.
>>>>
>>>> However I have added the following ifcfg file:
>>>> ifcfg-ovirtmgmt::
>>>> DEVICE=ovirtmgmt
>>>> TYPE=Bridge
>>>> ONBOOT=yes
>>>> DELAY=0
>>>> BOOTPROTO=dhcp
>>>> IPADDR=192.168.1.10
>>>> NETMASK=255.255.255.0
>>>> GATEWAY=192.168.0.1
>>>>
>>>> And made the adjustments, so the ifcfg-en1, file looks like this:
>>>> TYPE="Ethernet"
>>>> #BOOTPROTO="dhcp"
>>>> DEFROUTE="yes"
>>>> IPV4_FAILURE_FATAL="no"
>>>> IPV6INIT="yes"
>>>> IPV6_AUTOCONF="yes"
>>>> IPV6_DEFROUTE="yes"
>>>> IPV6_PEERDNS="yes"
>>>> IPV6_PEERROUTES="yes"
>>>> IPV6_FAILURE_FATAL="no"
>>>> NAME="em1"
>>>> UUID="bdc14160-3cb6-48d7-b8b9-a382dc384add"
>>>> ONBOOT="yes"
>>>> HWADDR="F8:B1:56:C1:F9:8E"
>>>> PEERDNS="yes"
>>>> PEERROUTES="yes"
>>>> BRIDGE=ovirtmgmt
>>>>
>>>>
>>>> I do realize that, the guides on the web for oVirt set BOOTPROTO to
>>>> static. But at the office, we do not have the possibility of static IP,
>>>> at the moment.
>>>>
>>>> Can some one please tell me what could be wrong ?
>>> dhcp should work too. The problem is with NetworkManager.
>>> You'll need to have static IPs though for the engine to be able to
>>> contact the hosts (as well as the hosts themselves, for hosted-engine HA
>>> at least), or you'll have problems if they for some reason get a
different
>>> IP address from your dhcp server.
>>>
>>> Please post relevant logs:
>>> hosts - /var/log/ovirt-hosted-engine*/*, /var/log/vdsm/*
>>> engine - /var/log/ovirt-engine/*
>>>
>>> Thanks and best regards,
>> Okay something seems to be a food here, because on the server hosting
>> our oVirt instance. We do not have a /var/log/ovirt-hosted-engine
>> directory.
> I didn't say you should - I wrote a '*' in the end. You should find
> /var/log/ovirt-hosted-engine-ha
> /var/log/ovirt-hosted-engine-setup
>
> But now I realize you did not mention hosted-engine. Can you detail
> a bit your setup? Where is the engine? Where are the hosts? How
> did you install and setup?
>
>> However the log files from the two other directories, can be found here:
>>
https://dl.dropboxusercontent.com/u/55488/ovirt_ovirtlogs.tar
> Please add from engine also /var/log/ovirt-engine/host-deploy/* .
>
> Thanks!
We do not have any ovirt-hosted-engine-* on the server, how ever here is
a link to the complete ovirt-engine folder:
https://dl.dropboxusercontent.com/u/55488/ovirt-engine.tar
Thanks and Best Regards
- Lars
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
Hey.
I have had a look at this. This /etc/init.d/ovirt-engine, we also do not
have on our system.
So how can I restart my oVirt instance?
How ever I have updated the network scripts:
To me this seems stranger and stranger, in the sense that we are missing
stuff. I have followed the oVirt documentation doing installation, which
I assume is correct.
Thank and Best Regards
- Lars