Hi,
you need a second host so as power management to work.
Since you verified it with command line then adding a second host should
resolve this issue.
In regards to the interface, you need to remove the bridge interface as
instructed (make it a simple interface) then leave ovirt to configure it
ovirtmgmt bridge.
Alex
On Wed, Mar 28, 2018 at 9:17 AM, TomK <tomkcpr(a)mdevsys.com> wrote:
Hey Guy's,
I've tested my ILO2 fence from the ovirt engine CLI and that works:
fence_ilo2 -a 192.168.0.37 -l <USER> --password="<SECRET>"
--ssl-insecure
--tls1.0 -v -o status
The UI gives me:
Test failed: Failed to run fence status-check on host 'ph-host01.my.dom'.
No other host was available to serve as proxy for the operation.
Going to add a second host in a bit but anyway to get this working with
just one host? I'm just adding the one host to oVirt for some POC we are
doing atm but the UI forces me to adjust Power Management settings before
proceeding.
Also:
2018-03-28 02:04:15,183-04 WARN [org.ovirt.engine.core.bll.network.NetworkConfigurator]
(EE-ManagedThreadFactory-engine-Thread-335) [2d691be9] Failed to find a
valid interface for the management network of host ph-host01.my.dom. If the
interface br0 is a bridge, it should be torn-down manually.
2018-03-28 02:04:15,184-04 ERROR [org.ovirt.engine.core.bll.hos
tdeploy.InstallVdsInternalCommand] (EE-ManagedThreadFactory-engine-Thread-335)
[2d691be9] Exception: org.ovirt.engine.core.bll.netw
ork.NetworkConfigurator$NetworkConfiguratorException: Interface br0 is
invalid for management network
I've these defined as such but not clear what it is expecting:
[root@ph-host01 ~]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master
bond0 state UP qlen 1000
link/ether 78:e7:d1:8c:b1:ba brd ff:ff:ff:ff:ff:ff
3: eth1: <NO-CARRIER,BROADCAST,MULTICAST,SLAVE,UP> mtu 1500 qdisc mq
master bond0 state DOWN qlen 1000
link/ether 78:e7:d1:8c:b1:ba brd ff:ff:ff:ff:ff:ff
4: eth2: <NO-CARRIER,BROADCAST,MULTICAST,SLAVE,UP> mtu 1500 qdisc mq
master bond0 state DOWN qlen 1000
link/ether 78:e7:d1:8c:b1:ba brd ff:ff:ff:ff:ff:ff
5: eth3: <NO-CARRIER,BROADCAST,MULTICAST,SLAVE,UP> mtu 1500 qdisc mq
master bond0 state DOWN qlen 1000
link/ether 78:e7:d1:8c:b1:ba brd ff:ff:ff:ff:ff:ff
21: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc
noqueue master br0 state UP qlen 1000
link/ether 78:e7:d1:8c:b1:ba brd ff:ff:ff:ff:ff:ff
inet6 fe80::7ae7:d1ff:fe8c:b1ba/64 scope link
valid_lft forever preferred_lft forever
23: ;vdsmdummy;: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen
1000
link/ether fe:69:c7:50:0d:dd brd ff:ff:ff:ff:ff:ff
24: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state
UP qlen 1000
link/ether 78:e7:d1:8c:b1:ba brd ff:ff:ff:ff:ff:ff
inet 192.168.0.39/23 brd 192.168.1.255 scope global br0
valid_lft forever preferred_lft forever
inet6 fe80::7ae7:d1ff:fe8c:b1ba/64 scope link
valid_lft forever preferred_lft forever
[root@ph-host01 ~]# cd /etc/sysconfig/network-scripts/
[root@ph-host01 network-scripts]# cat ifcfg-br0
DEVICE=br0
TYPE=Bridge
BOOTPROTO=none
IPADDR=192.168.0.39
NETMASK=255.255.254.0
GATEWAY=192.168.0.1
ONBOOT=yes
DELAY=0
USERCTL=no
DEFROUTE=yes
NM_CONTROLLED=no
DOMAIN="my.dom nix.my.dom"
SEARCH="my.dom nix.my.dom"
HOSTNAME=ph-host01.my.dom
DNS1=192.168.0.224
DNS2=192.168.0.44
DNS3=192.168.0.45
ZONE=public
[root@ph-host01 network-scripts]# cat ifcfg-bond0
DEVICE=bond0
ONBOOT=yes
BOOTPROTO=none
USERCTL=no
NM_CONTROLLED=no
BONDING_OPTS="miimon=100 mode=2"
BRIDGE=br0
#
#
# IPADDR=192.168.0.39
# NETMASK=255.255.254.0
# GATEWAY=192.168.0.1
# DNS1=192.168.0.1
[root@ph-host01 network-scripts]#
--
Cheers,
Tom K.
------------------------------------------------------------
-------------------------
Living on earth is expensive, but it includes a free trip around the sun.
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users