Hi,
I deloy hosted-engine, by this
blog,https://ovirt.org/
documentation/self-hosted/chap-Deploying_Self-Hosted_Engine/
but I am facing some error.who may give me some advise?
[root@localhost ~]# hosted-engine --deploy
^^^
The error is here: please set a valid hostname for your host: the engine VM
should be able to reach it.
If you add the host as localhost the engine VM will reach itself and it's
not what we want.
If you don'y have a working DNS system, hosted-engine-setup will ask about
injecting an entry for you under /etc/hosts on the engine VM but you still
need a valid hostname.
--== STORAGE CONFIGURATION ==--
Please specify the storage you would like to use (glusterfs,
iscsi, fc, nfs3, nfs4)[nfs3]:
Please specify the full shared storage connection path to use
(example: host:/path): 192.168.122.134:/home/exports/hosted-engine
--== HOST NETWORK CONFIGURATION ==--
iptables was detected on your computer, do you wish setup to
configure it? (Yes, No)[Yes]:
Please indicate a pingable gateway IP address [192.168.122.1]:
Please indicate a nic to set ovirtmgmt bridge on: (eth0) [eth0]:
--== VM CONFIGURATION ==--
The following appliance have been found on your system:
[1] - The oVirt Engine Appliance image (OVA) -
4.1-20180124.1.el7.centos
[2] - Directly select an OVA file
Please select an appliance (1, 2) [1]:
[ INFO ] Verifying its sha1sum
[ INFO ] Checking OVF archive content (could take a few minutes depending
on archive size)
[ INFO ] Checking OVF XML content (could take a few minutes depending on
archive size)
Please specify the console type you would like to use to connect
to the VM (vnc, spice) [vnc]:
[ INFO ] Detecting host timezone.
Would you like to use cloud-init to customize the appliance on
the first boot (Yes, No)[Yes]?
Would you like to generate on-fly a cloud-init ISO image (of
no-cloud type)
or do you have an existing one (Generate, Existing)[Generate]?
Please provide the FQDN you would like to use for the engine
appliance.
Note: This will be the FQDN of the engine VM you are now going
to launch,
it should not point to the base host or to any other existing
machine.
Engine VM FQDN: (leave it empty to skip): []:
engine.tchyp.com
Please provide the domain name you would like to use for the
engine appliance.
Engine VM domain: [
tchyp.com]
Automatically execute engine-setup on the engine appliance on
first boot (Yes, No)[Yes]?
Automatically restart the engine VM as a monitored service after
engine-setup (Yes, No)[Yes]?
Enter root password that will be used for the engine appliance
(leave it empty to skip):
[WARNING] Skipping appliance root password
Enter ssh public key for the root user that will be used for the
engine appliance (leave it empty to skip):
[WARNING] Skipping appliance root ssh public key
Do you want to enable ssh access for the root user (yes, no,
without-password) [yes]:
[WARNING] The oVirt engine appliance is not configured with a default
password, please consider configuring it via cloud-init
Please specify the size of the VM disk in GB: [58]:
[WARNING] Minimum requirements not met by available memory: Required: 4096
MB. Available: 3064 MB
Please specify the memory size of the VM in MB (Defaults to
maximum available): [3064]:
[WARNING] Minimum requirements for memory size not met
Continue with specified memory size? (Yes, No) [No]: yes
The following CPU types are supported by this host:
- model_Haswell-noTSX: Intel Haswell-noTSX Family
- model_SandyBridge: Intel SandyBridge Family
- model_Westmere: Intel Westmere Family
- model_Nehalem: Intel Nehalem Family
- model_Penryn: Intel Penryn Family
- model_Conroe: Intel Conroe Family
Please specify the CPU type to be used by the VM
[model_Haswell-noTSX]:
Please specify the number of virtual CPUs for the VM (Defaults
to appliance OVF value): [4]:
You may specify a unicast MAC address for the VM or accept a
randomly generated default [00:16:3e:5d:72:8a]:
How should the engine VM network be configured (DHCP,
Static)[DHCP]? Static
Please enter the IP address to be used for the engine VM
[192.168.122.2]: 192.168.122.211
[ INFO ] The engine VM will be configured to use 192.168.122.211/24
Please provide a comma-separated list (max 3) of IP addresses of
domain name servers for the engine VM
Engine VM DNS (leave it empty to skip) [192.168.122.1]:
Add lines for the appliance itself and for this host to
/etc/hosts on the engine VM?
Note: ensuring that this host could resolve the engine VM
hostname is still up to you
(Yes, No)[No]
--== HOSTED ENGINE CONFIGURATION ==--
Enter engine admin password:
Confirm engine admin password:
Please provide the name of the SMTP server through which we will
send notifications [localhost]:
Please provide the TCP port number of the SMTP server [25]:
Please provide the email address from which notifications will
be sent [root@localhost]:
Please provide a comma-separated list of email addresses which
will get notifications [root@localhost]:
[ INFO ] Stage: Setup validation
[WARNING] Cannot validate host name settings, reason: resolved host does
not match any of the local addresses
[ ERROR ] Host name is not valid: localhost.localdomain resolves to
127.0.0.1 and not all of them can be mapped to non loopback devices on this
host
[ ERROR ] Failed to execute stage 'Setup validation': Host name is not
valid: localhost.localdomain resolves to 127.0.0.1 and not all of them can
be mapped to non loopback devices on this host
[ INFO ] Stage: Clean up
[ INFO ] Generating answer file '/var/lib/ovirt-hosted-engine-
setup/answers/answers-20180404182053.conf'
[ INFO ] Stage: Pre-termination
[ INFO ] Stage: Termination
[ ERROR ] Hosted Engine deployment failed
Log file is located at /var/log/ovirt-hosted-engine-
setup/ovirt-hosted-engine-setup-20180404181811-aq5ord.log
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users