On Wed, 22 Feb 2012, Jorick Astrego wrote:
Dear all,
We have some problems with the Power Management setup in ovirt.
I'm unable to get the Power Management functionality working with our Supermicro MBD-X8DTT-HEF+ IPMI.
Are there any special options to configure? I choose as type "ipmilan"
Everything works fine manually with:
ipmitool -H *.*.*.226 -U ADMIN sel
Just make sure IPMI IP is reachable from all the nodes, but at least with my Supermicro IPMI I just enter: Address {ip} User Name ADMIN Password {password} Type ipmilan I then hit Test and it works great. The only issue I have been having is that sometimes the Supermicro IPMI IPs are unreachable for some odd reason and I have to cold reset the IPMI card with the Supermicro IPMI tool. I hope that in the future ovirt adds more then one fence option for a host so I could use my APC power strips. Since each server requires a plug on two strips there is no way to configure this.
<> Nathan Stratton CTO, BlinkMind, Inc. nathan at robotics.net nathan at blinkmind.com http://www.robotics.net http://www.blinkmind.com