I am having trouble getting fencing to work on my HP DL180 g6 servers. They have ilo100 controllers. The documentation mentions ipmi compliance, but there are problems.
The ipmilan driver gets a response, but it is the wrong response. A status request results in the NMI line being asserted, which (in standard PC architecture) is the same as pressing the reset button (which these servers don't have). Thats weird. I have 2 ML110 G6 desktop servers, as storage servers, and
This is a multi-part message in MIME format. --------------070200010504070200080204 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Ted Miller wrote: those have ilo100 controllers too and I just checked and they are setup as ipmilan in engine. I have used the Test button more than once and never had problems. My Summary page says: *IPMI Version:* 2.0 *Firmware Version:* 4.23 *Hardware Version:* 1.0 *Description:* ProLiant ML110 G6 *System GUID:* 33221100-5544-7766-8899-AABBCCDDEEFF Mayb that helps you to track down the problem. If you have got question, please ask. Joop --------------070200010504070200080204 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit <!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html> <head> <meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type"> </head> <body bgcolor="#ffffff" text="#000000"> Ted Miller wrote: <blockquote cite="mid:52DFE44A.30701@hcjb.org" type="cite"> <meta http-equiv="content-type" content="text/html; "> I am having trouble getting fencing to work on my HP DL180 g6 servers. They have ilo100 controllers. The documentation mentions ipmi compliance, but there are problems.<br> <br> The ipmilan driver gets a response, but it is the wrong response. A status request results in the NMI line being asserted, which (in standard PC architecture) is the same as pressing the reset button (which these servers don't have).<br> </blockquote> Thats weird. I have 2 ML110 G6 desktop servers, as storage servers, and those have ilo100 controllers too and I just checked and they are setup as ipmilan in engine.<br> I have used the Test button more than once and never had problems. My Summary page says:<br> <table id="Table1" class="datatable" cellpadding="5"> <tbody> <tr> <td><strong>IPMI Version:</strong></td> <td>2.0</td> </tr> <tr> <td><strong>Firmware Version:</strong></td> <td>4.23</td> </tr> <tr> <td><strong>Hardware Version:</strong></td> <td>1.0</td> </tr> <tr> <td><strong>Description:</strong></td> <td>ProLiant ML110 G6</td> </tr> <tr> </tr> <tr> <td><strong>System GUID:</strong></td> <td>33221100-5544-7766-8899-AABBCCDDEEFF</td> </tr> </tbody> </table> <br> Mayb that helps you to track down the problem. If you have got question, please ask.<br> <br> Joop<br> <br> </body> </html> --------------070200010504070200080204--