
Sorry, the picture should actually say br2 :) ... have had to edit it to protect the real name(s) ... Alex On 6 March 2013 11:39, Alex Leonhardt <alex.tuxx@gmail.com> wrote:
All,
I've added manually a bond.<vlantag> to a Hyper-Visor, then added a bridge and slaved bond.<vlantag> to it.
I've upped the interfaces (no IPs), however ovirt-engine still wont allow me to add the new bridged interface. I did this yesterday, so I thought, maybe it's just a cache issue, however, it doesnt seem to update the HVs network config periodically ?
What can I do to get this sorted ?? I dont want to have to restart the networking as VMs are running and needed.
FWIW, the setup looks like this -
eth0 | ----- bond0.111 --- br1 | ----- bond0.112 --- ovirtmgmt eth1
the change was :
eth0 | ----- bond0.111 --- br1 | ----- bond0.112 --- ovirtmgmt | ----- bond0.113 --- br2 eth1
I then added "br2" to the ovirt-engine config, however, I'm not able to assign it to bond in the network config (web admin interface) for the hyper visor / host.
Also see screenshot attached.
Thanks Alex
--
| RHCE | Senior Systems Engineer | www.vcore.co | www.vsearchcloud.com |
-- | RHCE | Senior Systems Engineer | www.vcore.co | www.vsearchcloud.com |