[ovirt-users] Re: The Engine VM (/32) and this host (/32) will not be in the same IP subnet.
Ok I managed to continue choosing DHCP, which interestingly, it took
an IP from the 10.200.30.0/23 subnet.
I saw a lot of selinux AVC issues in journalctl, but I didnt see the
install process end and the screen was obscured with multiple network
messages.
Is it ok to ssh in and make it static?
Am I allowed to make local changes inside it?
Because its not resolving to the IP address DNS has for it (10.200.30.10/23).
I would also like to make it an IPA client and such.
On Wed, Oct 27, 2021 at 9:56 PM Sina Owolabi <notify.sina(a)gmail.com> wrote:
Rejected:
How should the engine VM network be configured? (DHCP,
Static)[DHCP]: Static
Please enter the IP address to be used for the engine VM []:
10.200.30.10/23
[ ERROR ] Failed to execute stage 'Environment customization':
IPAddress() does not support netmasks or subnet prefixes! See
documentation for details.
[ INFO ] Stage: Clean up
[ INFO ] Cleaning temporary resources
On Wed, Oct 27, 2021 at 9:53 PM Alex McWhirter <alex(a)triadic.us> wrote:
>
> On 2021-10-27 16:09, Sina Owolabi wrote:
> > Its really weird.
> > Just tried again, with the same failure, on a freshly reinstalled
> > CentOS 8.
> > Server has a number of vlan interfaces, on a physical interface
> > enp2s0f1, all in the defined notation,
> > one vlan interface has an IP, 10.200.10.3/23,
> > Second physical interface enp2s0f0 is configured for 10.200.30.3/23,
> > is the interface with a gateway and DNS, and the router can provide
> > other IPs with DHCP here, and which I hope to have ovirtmgmt on.
> > I run hosted-engine --deploy, I select the gateway for the enp2s0f1
> > vlan (10.200.10.1).
> >
> > Please indicate the gateway IP address [10.200.30.1]: 10.200.10.1
> > Please indicate a nic to set ovirtmgmt bridge on (enp2s0f1,
> > enp2s0f1.1014, enp2s0f1.1016, enp2s0f1.1015, enp2s0f1.1005, enp2s0f0)
> > [enp2s0f1.1014]: enp2s0f0
> > Please specify which way the network connectivity should be
> > checked (ping, dns, tcp, none) [dns]:dns
> > How should the engine VM network be configured? (DHCP,
> > Static)[DHCP]: Static
> > Please enter the IP address to be used for the engine VM []:
> > 10.200.30.10
> > [ ERROR ] The Engine VM (10.200.30.10/32) and this host
> > (10.200.30.3/32) will not be in the same IP subnet.
> > Static routing configuration are not supported on automatic
> > VM configuration.
> >
> > What can I try differently?
> >
>
> Try setting the subnet with the engine IP.
>
> I.E. instead of 10.200.30.10 do 10.200.30.10/23
--
cordially yours,
Sina Owolabi
+2348176469061
--
cordially yours,
Sina Owolabi
+2348176469061