10:05 a.m.
On Thu, Dec 31, 2015 at 4:41 PM, Doron Fediuck <dfediuck(a)redhat.com> wrote:
Hi Michael,
the fact that your CPU supports VT does not mean it's enabled in the BIOS.
Reboot the machine and into the security -> virtualization settings. Make
sure
it's enabled there.
It's detailed in
http://www.linux-kvm.org/page/FAQ#.22KVM:_disabled_by_BIOS.22_error
If if doesn't work after the changes in the BIOS, make sure to power off
and on and possibly disable trusted execution.
Y.
One more thing you want to verify is that the kvm module is loaded
into
the kernel-
lsmod | grep kvm
You can also run: dmesg | grep kvm
In most cases you'll find something like kvm: some error if it's disable
by the bios.
Doron
On Wed, Dec 30, 2015 at 11:53 AM, Michael Cooper <mcooper(a)coopfire.com>
wrote:
> Hey Guys,
>
> First time pposter here, I am having an issue with installing
> oVirt on a Dell SC1435
> I ran lscpu to make sure I was Virtualized in the bios, The following was
> the result
>
> [root@council ~]# lscpu
> Architecture: x86_64
> CPU op-mode(s): 32-bit, 64-bit
> Byte Order: Little Endian
> CPU(s): 8
> On-line CPU(s) list: 0-7
> Thread(s) per core: 2
> Core(s) per socket: 4
> Socket(s): 1
> NUMA node(s): 1
> Vendor ID: GenuineIntel
> CPU family: 6
> Model: 30
> Model name: Intel(R) Core(TM) i7 CPU K 875 @ 2.93GHz
> Stepping: 5
> CPU MHz: 1197.000
> BogoMIPS: 5862.18
> Virtualization: VT-x
> L1d cache: 32K
> L1i cache: 32K
> L2 cache: 256K
> L3 cache: 8192K
> NUMA node0 CPU(s): 0-7
>
> So I then tried to run the hosted-engine --deploy and this is what
> happens:
>
> [root@starfleet tmpengineiso]# screen
> [ INFO ] Stage: Initializing
> [ INFO ] Generating a temporary VNC password.
> [ INFO ] Stage: Environment setup
> Continuing will configure this host for serving as hypervisor
> and create a VM where you have to install oVirt Engine afterwards.
> Are you sure you want to continue? (Yes, No)[Yes]: YEs
> Configuration files: []
> Log file:
>
/var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20151230042443-p6o0qo.log
> Version: otopi-1.4.0 (otopi-1.4.0-1.el7.centos)
> [ ERROR ] Failed to execute stage 'Environment setup': Hardware does not
> support virtualization
> [ INFO ] Stage: Clean up
> [ INFO ] Generating answer file
> '/var/lib/ovirt-hosted-engine-setup/answers/answers-20151230042447.conf'
> [ INFO ] Stage: Pre-termination
> [ INFO ] Stage: Termination
>
> I have attached my logfile, and a few screeshots .... Let me know please,
>
> Thanks,
>
> --
> Michael A Cooper
> Linux Certified
> Zerto Certified
> http://www.coopfire.com
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users