Re: [Users] SPM not selected after host failed
Thursday, 20 September
2012
Thu, 20 Sep
'12
5:01 p.m.
Am 20.09.2012 15:34, schrieb Itamar Heim:
Hello Itamar,
thank you for your answer.
is power management configured on both hosts?
since the non responsive node happened to be the SPM, it must be fenced.
engine should to this automatically (and this is what you did manually by 'confirm
host has been rebooted'.
but engine can only do this automatically if power management is configured on both
hosts.
Power management is configured for both nodes. But this might be the
problem: we use the integrated IPMI over LAN power management - and
if I pull the plug on the machine the power management becomes un-
available, too.
Could this be the problem?
Kind regards,
Marc
--
________________________________________________________________________
Dipl.-Inform. Marc-Christian Schröer schroeer(a)ingenit.com
Geschäftsführer / CEO
----------------------------------------------------------------------
ingenit GmbH & Co. KG Tel. +49 (0)231 58 698-120
Emil-Figge-Strasse 76-80 Fax. +49 (0)231 58 698-121
D-44227 Dortmund www.ingenit.com
Registergericht: Amtsgericht Dortmund, HRA 13 914
Gesellschafter : Thomas Klute, Marc-Christian Schröer
________________________________________________________________________