Re: [ovirt-users] FC QLogic question

Thanks for responding Daniel.

I was wondering and thought the message may be irrelevant. But yes, it doesn’t appear to be working. When I try to add a FC storage domain, no hosts are showing in the drop down box of hosts. I have loaded the latests ovirtnode (3.4.something…) on two hosts now and neither are working.

Also having a lot of issues with configuring the network. I configure an interface I can ping it, but it shows as unconfigured… on one host I have added it to the manager and I see the interfaces anyway, but on the second host I configure the eth0, I can ping it, it added to the ovirt engine but it shows no NICs. Should I be using an earlier version maybe? thanks again and best regards. *Bill Dossett* *Virtualisation Architect* *Pitney Bowes – Tech Central*** 6 Hercules Way, 600 Leavesden Park Watford, WD25 7GS Phone(+44) (0)1923 279353 | VOIP: 54739353 Mobile(+44) (0)7775 908612 bill.dossett(a)pb.com <mailto:bill.dossett@pb.com> www.pb.com <http://www.pb.com/> *In Engineering?**Raise a ticket via Remedy Anywhere [HERE <http://teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incident/new... less than a minute* *ManageIQ User Guide available* [*HERE <https://dl.dropbox.com/u/6219441/ManageIQ%20-%20User%20Manual%20PB%20v4.p...] *Check out the ManageIQ Blog for recent enhancements and information [HERE] <http://teamsite.inside.pb.com/sites/TCPPM/GES/manageiq/default.aspx>* On Sep 11, 2014, at 10:52 AM, Daniel Helgenberger <daniel.helgenberger(a)m-box.de <mailto:daniel.helgenberger@m-box.de>> wrote: > Hello Bill, > > what are your problems acually? Is fibre channel not working (as expected)? > > The log snippet you provided is completly normal and the messages can > safely be ignored. This is also unrelated to oVirt but rather CentOS (or > the distro you are running) I suppose. > > Cheers! > > On 11.09.2014 10:51, Bill Dossett wrote: >> Hi, >> >> I seem to have run into a problem setting up ovirt with Fibre Channel storage. >> >> I have a 2MBs SAN and qlogic cards in the nodes. I used this same setup with >> RHEV about 6 months ago and it just worked, storage was there no problems. Now >> booting with ovirtnode distro, I am seeing >> >> Sep 9 08:01:27 localhost kernel: qla2xxx [0000:0c:00.0]-0091:1: Firmware images >> can be retrieved from: http://ldriver.qlogic.com/firmware/. >> >> Sep 9 08:01:27 localhost kernel: scsi1 : qla2xxx >> >> Sep 9 08:01:27 localhost kernel: qla2xxx [0000:0c:00.0]-00fb:1: QLogic QLE2460 >> - QLogic 4GB FC Single-Port PCI-E HBA for IBM System x. >> >> Sep 9 08:01:27 localhost kernel: qla2xxx [0000:0c:00.0]-00fc:1: ISP2432: PCIe >> (2.5GT/s x4) @ 0000:0c:00.0 hdma+ host#=1 fw=4.00.26 (2). >> >> Sep 9 08:01:27 localhost kernel: ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 >> (level, low) -> IRQ 16 >> >> I have googled the firmware error and it says some cards need a firmware flash >> and some don’t. These are pretty standard HBAs so I would think they would be >> supported out of the box, but maybe not. Looking at trying to add the firmware >> looked kind of complex – if I need to do this, does anyone know of a nice and >> easy howto guide on this. I’m just getting started with ovirt and appreciate >> any help >> >> >> Thanks >> >> *Bill Dossett* >> >> *Virtualisation Architect* >> >> *Pitney Bowes – Tech Central*** >> >> 6 Hercules Way, 600 Leavesden Park >> >> Watford, WD25 7GS >> >> Phone(+44) (0)1923 279353 | VOIP: 54739353 >> >> Mobile(+44) (0)7775 908612 >> >> bill.dossett(a)pb.com <mailto:bill.dossett@pb.com> <mailto:bill.dossett@pb.com> >> >> www.pb.com <http://www.pb.com> <http://www.pb.com/> >> >> *In Engineering?**Raise a ticket via Remedy Anywhere [HERE >> <http://teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incident/new... >> >> less than a minute* >> >> *ManageIQ User Guide available*[*HERE >> <https://dl.dropbox.com/u/6219441/ManageIQ%20-%20User%20Manual%20PB%20v4.p...] >> >> *Check out the ManageIQ Blog for recent enhancements and information [HERE] >> <http://teamsite.inside.pb.com/sites/TCPPM/GES/manageiq/default.aspx>* >> >> >> -------------------------------------------------------------------------------- >> > > -- > Daniel Helgenberger > m box bewegtbild GmbH > > P: +49/30/2408781-22 > F: +49/30/2408781-10 > > ACKERSTR. 19 > D-10115 BERLIN > > > www.m-box.de <http://www.m-box.de> www.monkeymen.tv <http://www.monkeymen.tv> > > Geschäftsführer: Martin Retschitzegger / Michaela Göllner > Handeslregister: Amtsgericht Charlottenburg / HRB 112767 > --------------------------------------------------------------------------------