Re: [Users] Hello All I am new to ovirt and have a question

On Tue, 2012-01-17 at 12:39 -0500, Dominic Kaiser wrote: > Thanks all, > > > I have tried the new ovirt node 2.2.1-3 nightly build today and it > finally recognized my realtek nic card. So I have moved to try to get > node to install. Still a fail I might add. It adds to the ovirt gui > but fails install and says the ovirt hyperviser is not a supported > platform. That is kind of funny since it is fedora 16. And yes I had > edited the vdsm.conf by hand was that wrong to do? Should I have used > vi instead? I would like to get ovirt node running since it is > working now lighter install. This is what I get: > > > 2012-Jan-17, 12:28:59 > Failed to install Host > vm3.bostonvineyard.org. > Step: INSTALLER; > Details: Unsupported > platform: > oVirtNodeHypervisor. > > > > If it registers from ovirt node should it not show up in the ovirt > Management gui? Or do you still have to add it as usual? So that is > what I did and that is the error I recieved. oVirt Node supports 2 ways of registering. 1. Set the hostname and port of the management server The Node registers itself to the engine and the admin then only has to approve it.

2. Set a password and use add host from the engine The node does no registration. The admin for engine manually adds the node as they would a regular Fedora node.

As for the actual error, I've seen other problems with that build of ovirt-node that I'm working on so I haven't tried to register it yet. I'll try it though. Mike > > > Let me know what you think, > > > Dominic > > On Tue, Jan 17, 2012 at 11:46 AM, Doron Fediuck <dfediuck(a)redhat.com&gt; > wrote: > On Tuesday 17 January 2012 11:31:43 Dominic Kaiser wrote: > > Ok here are the log files. It installs most packages and > then hangs up on > > libjpeg? libjpeg is installed including dev package. This > is a bare-metal > > node running fedora 16 with vdsm packages installed from > repo. Your node > > .iso 2.2.1 does not initialize realtek nic cards so I can > not use that. > > The 2.2.1 .iso sees the nic card but that is it. So I went > the route of > > installing the full fedora 16 distro and installing vdsm > packages from > > repo. I am bridged correctly and ssl=false in the > vdsm.conf. Now when I > > go to the ovirt management gui and install the node it fails > at this step. > > I can see the node in ovirt management gui just an fyi so > not a problem > > with detection. It seems that the vdsm server will not > start due to > > libjpeg install failure but mabey I am wrong. > > > > Let me know what you think, > > > > Dominic > > > > Hi Dominic, > This is where your installation fails: > ParsingError: File contains parsing > errors: /etc/vdsm/vdsm.conf > [line 42]: ' default_bridge = engine\n' > [line 93]: ' ssl = false\n' > [line 191]: ' management_port = 54321\n' > [line 193]: ' management_ip = 10.3.0.245\n' > Sun, 15 Jan 2012 08:01:27 DEBUG <BSTRAP > component='CreateConf' status='FAIL' message='Basic > configuration failed'/> > > Now I'm wondering how did you edit /etc/vdsm/vdsm.conf? > Did you really add a string '\n' or is it just the way the > error propmts? > > -- > > /d > > "Air conditioned environment - Do NOT open Windows!" > > > > > > -- > Dominic Kaiser > Greater Boston Vineyard > Director of Operations > > cell: 617-230-1412 > fax: 617-252-0238 > email: dominic(a)bostonvineyard.org > > > > _______________________________________________ > Users mailing list > Users(a)ovirt.org > http://lists.ovirt.org/mailman/listinfo/users _______________________________________________ Users mailing list Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users