On 12/18/2012 9:46 AM, Gianluca Cecchi wrote:
On Wed, Dec 12, 2012 at 11:29 PM, Jason Brooks wrote:
> > > > the same if I run from command line: > > > > /sbin/tuned-adm profile virtual-host > > > > > > I was having this same issue w/ F18 w/ all updates applied and > > ovirt > > 3.2 from the new 3.2-alpha repo. I did a "yum downgrade tuned" and > > the install completed successfully. > > > > Now I just have to figure out why my host is non-operational... > > > > Jason > > I suggest you perform host deployment again.
Thanks, that worked. The ovirtmgmt bridge wasn't created the first time around, now I'm up.
Hello, had again time to come back on this today. So I updated my f18 vm with ovirt-nightly repo and then engine-cleanup and engine-setup again. and I got the usual error on timeout when first deploying host.
But I'm able to connect from my host to webadmin portal on my vm (f18aio) After downgrade of tuned-adm it worked for me too the re-deploy of the host from the gui.
The tuned-adm problem is selinux related. If you set selinux to permissive before the host deploy it will work fine using tuned-2.1.1-1.fc18.noarch.
from Dec 11 00:58:09 Updated: tuned-2.1.1-1.fc18.noarch
to Dec 18 13:00:14 Installed: tuned-2.0.1-4.fc18.noarch
I think it was the deploy step that caused also the vm (oVirt node deployed from itself...) to restart. And now I have this situation I would like to fix:
my vm is f18aio with ip 192.1681.122.160 On my f17 host I have in /etc/hosts 192.168.122.160 f18aio.localdomain.local f18aio
so that dnsmask lets me use firefox on host to connect to webadmin portal on vm But after the successful deploy I'm not able anymore to connect correctly as before to admin portal....
From host:
http://f18aio ---> ok
click on webadmin portal link ---> ko Firefox can't establish a connection to the server at f18aio.
http://192.168.122.160 --> ko Firefox can't establish a connection to the server at 192.168.122.160
If I ssh -X f18aio from host and run firefox on vm side:
http://f18aio ---> ok
click on webadmin portal link ---> ok (see screenshot at https://docs.google.com/open?id=0BwoPbcrMv8mvZzdsQnFMU0RuUGs )
The same if I use 192.168.122.160
DO I have to set up anything at vm side of my host side? At this moment on it I see I have the ip address put on ovirtmgmt network that the deploy step made available:
[g.cecchi@f18aio ~]$ ip addr list 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 <http://127.0.0.1/8> scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master ovirtmgmt state UP qlen 1000 link/ether 52:54:00:b0:6c:5f brd ff:ff:ff:ff:ff:ff inet6 fe80::5054:ff:feb0:6c5f/64 scope link valid_lft forever preferred_lft forever 3: ovirtmgmt: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP link/ether 52:54:00:b0:6c:5f brd ff:ff:ff:ff:ff:ff inet 192.168.122.160/24 <http://192.168.122.160/24> brd 192.168.122.255 scope global ovirtmgmt inet6 fe80::5054:ff:feb0:6c5f/64 scope link valid_lft forever preferred_lft forever 5: ;vdsmdummy;: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 06:95:56:60:84:1a brd ff:ff:ff:ff:ff:ff 6: bond0: <NO-CARRIER,BROADCAST,MULTICAST,MASTER,UP> mtu 1500 qdisc noqueue state DOWN link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 7: bond4: <NO-CARRIER,BROADCAST,MULTICAST,MASTER,UP> mtu 1500 qdisc noqueue state DOWN link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
[g.cecchi@f18aio ~]$ cat /proc/net/bonding/bond0 Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
Bonding Mode: load balancing (round-robin) MII Status: down MII Polling Interval (ms): 0 Up Delay (ms): 0 Down Delay (ms): 0
[g.cecchi@f18aio ~]$ cat /proc/net/bonding/bond4 Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
Bonding Mode: load balancing (round-robin) MII Status: down MII Polling Interval (ms): 0 Up Delay (ms): 0 Down Delay (ms): 0
[root@f18aio ~]# brctl show bridge namebridge idSTP enabledinterfaces ;vdsmdummy;8000.000000000000no ovirtmgmt8000.525400b06c5fnoeth0
Thanks in advance, Gianluca
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users