10:42 a.m.
Lev,
Thanks for your response.
If I attempt to manually add the route using route add:
route add -net 172.22.20.31 netmask 255.255.255.255 gw 172.21.12.61 dev ovirtmgmt
This static route is refused and all traffic is routed over the default gateway.
But if I use a server that doesn’t use the ovirtmgmt interface and set the same static
route, the required data is routed correctly over that static route.
[Count On EMC]<http://www.emcins.com/>
Doug Maxfield | Senior Operating Systems Analyst
EMC Insurance Companies
717 Mulberry St | Des Moines, IA 50265
Tel: 515.345.4507 | Fax: 866.331.1522
Doug.L.Maxfield@EMCIns.com<mailto:Doug.L.Maxfield@EMCIns.com> |
www.emcins.com<http://www.emcins.com/>
From: Lev Veyde <lveyde(a)redhat.com>
Sent: Tuesday, February 12, 2019 10:34 AM
To: Doug Maxfield <Doug.L.Maxfield(a)EMCIns.com>
Cc: users <users(a)ovirt.org>
Subject: Re: [ovirt-users] Creating a static route
Hi Doug,
What is the exact problem you are having while attempting to add a static route on the
hosts?
Thanks in advance,
On Tue, Feb 12, 2019 at 5:23 PM
<doug.l.maxfield@emcins.com<mailto:doug.l.maxfield@emcins.com>> wrote:
Good Morning,
New to oVirt. We are using this with a backup solution from Commvault. The issue that we
are having is that we need to setup a static route for specific data between 2 remote
sites. The ovirtmgmt is configured with the correct IP and gateway for the server. We
need to route data over a different gateway so that we don't "max out" the
default network connection between the 2 sites. Example below
Ovirtmgmt IP - 172.21.5.31
Gateway IP - 172.21.0.250
We need any traffic with a destination of 172.22.20.31(Remote site) to route over this
gateway, 172.21.12.61
There are multiple servers in this configuration. Servers that are not using the
ovirtmgmt interface for their default, we are able to route the data. The only problem is
with attempting to setup a different static route on the ovirtmgmt interfaces.
Thanks in advance for any help!!!
Doug
_______________________________________________
Users mailing list -- users@ovirt.org<mailto:users@ovirt.org>
To unsubscribe send an email to
users-leave@ovirt.org<mailto:users-leave@ovirt.org>
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/WGXSLHAP3X5...
--
Lev Veyde
Software Engineer, RHCE | RHCVA | MCITP
Red Hat Israel
<https://www.redhat.com>
lev@redhat.com<mailto:lev@redhat.com> |
lveyde@redhat.com<mailto:lveyde@redhat.com>
[https://www.redhat.com/profiles/rh/themes/redhatdotcom/img/logo-red-hat-b...
TRIED. TESTED. TRUSTED.<https://redhat.com/trusted>
NOTICE: This message (including any attachments) is intended for a specific individual
and may contain information that is either confidential or legally protected. If you
believe that it has been sent to you in error, please reply to the sender that you have
received the message in error, then delete it. If you are not the intended recipient, you
are hereby notified that any retention, dissemination, distribution, or copying of this
communication is strictly prohibited. Thank you. EMC071856
