Re: [ovirt-users] iSCSI

Noting more configuration ,if I configure openfiler as a iSCSI Lun able to detect the lun , moment I configure EMC Lun unable to detect the Lun ID . Any other configs do I need to do in Host ? any comands to delete the old Lun ID ? .[root@pbuovirt3 ~]# cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 03 Id: 00 Lun: 00 Vendor: HP Model: P410i Rev: 2.00 Type: RAID ANSI SCSI revision: 00 Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: HP Model: LOGICAL VOLUME Rev: 2.00 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi1 Channel: 00 Id: 00 Lun: 00 Vendor: Optiarc Model: DVD RW AD-7561S Rev: AH52 Type: CD-ROM ANSI SCSI revision: 05 Host: scsi8 Channel: 00 Id: 00 Lun: 00 Vendor: DGC Model: LUNZ Rev: 3103 Type: Direct-Access ANSI SCSI revision: 04 [root@pbuovirt3 ~]# On Tue, Sep 20, 2016 at 8:51 PM, Dan Yasny <dyasny(a)gmail.com&gt; wrote: > It looks like iscsi does the job, bu multipath doesn't. What do you use > on the hosts? How is multipath.conf configured? Any other special > configuration you use? > > Also, can you paste /proc/scsi/scsi and blkid > > On Tue, Sep 20, 2016 at 11:18 AM, Budur Nagaraju <nbudoor(a)gmail.com&gt; > wrote: > >> >> Below are the details, >> >> http://pastebin.com/aLBMH3Q6 >> >> On Tue, Sep 20, 2016 at 8:27 PM, Dan Yasny <dyasny(a)gmail.com&gt; wrote: >> >>> Try this on the host: >>> >>> iscsiadm -m discovery -t st -p 10.206.67.46 >>> iscsiadm -m node -L all >>> iscsiadm -m node >>> iscsiadm -m session >>> multipath -ll >>> >>> and pastebin the output >>> >>> On Tue, Sep 20, 2016 at 10:54 AM, Budur Nagaraju <nbudoor(a)gmail.com&gt; >>> wrote: >>> >>>> Yes I did that too but no luck :( >>>> >>>> Thanks, >>>> Nagaraju >>>> >>>> >>>> On Tue, Sep 20, 2016 at 8:06 PM, Dan Yasny <dyasny(a)gmail.com&gt; wrote: >>>> >>>>> After you discover, did you also click the login button? >>>>> >>>>> On Tue, Sep 20, 2016 at 10:28 AM, Budur Nagaraju <nbudoor(a)gmail.com&gt; >>>>> wrote: >>>>> >>>>>> Below are the Steps, >>>>>> >>>>>> Under Storage Tab:New Domain -->Name>Domain >>>>>> Type-->Data/iSCSi-->Select the Host -->Discover the Targets , >>>>>> >>>>>> After giving all the info able to detect the iSCSI targets but uable >>>>>> to get the Lun id ,below are the details of the logs. >>>>>> >>>>>> >>>>>> http://pastebin.com/ph1YSqhH >>>>>> >>>>>> Thanks, >>>>>> Nagaraju >>>>>> >>>>>> >>>>>> On Tue, Sep 20, 2016 at 6:47 PM, Dan Yasny <dyasny(a)gmail.com&gt; wrote: >>>>>> >>>>>>> Can you describe what you tried to do and how it failed? >>>>>>> >>>>>>> On Tue, Sep 20, 2016 at 5:54 AM, Budur Nagaraju <nbudoor(a)gmail.com&gt; >>>>>>> wrote: >>>>>>> >>>>>>>> HI All, >>>>>>>> >>>>>>>> While configuring iSCSI LUN is not getting detected any documents >>>>>>>> to configure iSCSI in oVirt ? >>>>>>>> >>>>>>>> Thanks, >>>>>>>> Nagaraju >>>>>>>> >>>>>>>> >>>>>>>> _______________________________________________ >>>>>>>> Users mailing list >>>>>>>> Users(a)ovirt.org >>>>>>>> http://lists.ovirt.org/mailman/listinfo/users >>>>>>>> >>>>>>>> >>>>>>> >>>>>> >>>>> >>>> >>> >> >