1:34 a.m.
On 02/13/2013 12:40 AM, Matt . wrote:
Hi guys,
Thanks, this clears it more why we have VM and display options and how
it's used on the nics.
What hapens with me on a 3.2 installation when I want to attach a
network without IP (VM option or not) to a Nic I get the noticed error
like I told before:
Error while executing action Setup Networks: Illegal or Incomplete IP
Address
Here is the error from the log:
Could you attach the rest parameters of this command ? (grep for all the
lines from the log that include the string: 7289062c)
eth2 {id=713f2687-6d84-4010-9076-fbfc67cf6831,
vdsId=033febb8-4f52-4253-bb6d-a8807816affd, name=eth2,
macAddress=00:1c:c4:d8:cb:36, networkName=LAN_TEST, bondName=null,
bootProtocol=NONE, address=, subnet=, gateway=null, mtu=0,
bridged=false, speed=1000, type=0, networkImplementationDetails=null}],
removedNetworks=[],
removedBonds=[]), log id: 7a99dbd1
2013-02-12 23:31:08,783 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.SetupNetworksVDSCommand]
(ajp--127.0.0.1-8702-10) [7289062c] FINISH, SetupNetworksVDSCommand, log
id: 7a99dbd1
2013-02-12 23:31:09,796 ERROR
[org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase]
(ajp--127.0.0.1-8702-10) [7289062c]
org.ovirt.engine.core.vdsbroker.vdsbroker.VDSNetworkException:
VDSGenericException: VDSNetworkException: Specified netmask or gateway
but not ip
2013-02-12 23:31:09,797 ERROR
[org.ovirt.engine.core.vdsbroker.VDSCommandBase]
(ajp--127.0.0.1-8702-10) [7289062c] Command SetupNetworksVDS execution
failed. Exception: VDSNetworkException: VDSGenericException:
VDSNetworkException: Specified netmask or gateway but not ip
2013-02-12 23:31:09,798 ERROR
[org.ovirt.engine.core.bll.network.host.SetupNetworksCommand]
(ajp--127.0.0.1-8702-10) [7289062c] Command
org.ovirt.engine.core.bll.network.host.SetupNetworksCommand throw Vdc
Bll exception. With error message VdcBLLException:
org.ovirt.engine.core.vdsbroker.vdsbroker.VDSNetworkException:
VDSGenericException: VDSNetworkException: Specified netmask or gateway
but not ip
Why does this happen on None Bootproto or DHCP ?
2013/2/12 Moti Asayag <masayag(a)redhat.com <mailto:masayag@redhat.com>>
On 02/11/2013 12:37 PM, Matt . wrote:
> I'm struggeling setting up my network in oVirt at the moment as I
would
> like to seperate specific VM's from other devices/clients in my
network.
>
You should define the 'logical networks' which describe the networks of
your setup.
See the response to Nicolas on this thread of the steps to achieve it.
If wish to create a network dedicated to storage which shouldn't allow
VMs to use it, it should be defined as non-vm network.
Once the network is assigned to a cluster, you can add new network
interface to your VMs which defines to which bridges (vm networks) they
are connected: hence, segregating the VMs is done by the vlan-id of the
bridge the VMs are connected to.
> I have decent setup switching network using Vlans, this is also
the fact
> for ovirt and the storage nodes where teh ports are seperated between
> storage and management.
>
> Because I want to manage which client can acces which VM I need Vlan
> tagging. The question is where are we going to do this, on the VM
itself
> or on the network I attach the VM's Nic to.
>
> Because of the lacking documentation at this point it's not clear,
so I
> would like to figure out and maybe change the wiki there.
>
> I also cannot understand why I can set an IP to a network and only the
> subnet where I also can set DHCP which puts also the gateway.
>
The default gateway can be provided for the management network only. You
can define its IP address either as static by providing its known IP
address or letting it determine the address from the DHCP server.
You cannot select 'None' as boot-protocol for the management network
since then the engine will not be able to communicate with the host.
However you can select 'none' boot-protocol to any other networks if
wishes.
> I'm not able to set None or DHCP and can only add a network with
IP, but
> what IP and why ? Or just a 192.16.x.0 with a 255.255.255.0 subnet ?
>
> I hope someone can clear this a little bit more out.
>
> Thanks!
>
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org <mailto:Users@ovirt.org>
> http://lists.ovirt.org/mailman/listinfo/users
>