I have a SAN Network defined in oVirt where I have enabled Jumbo frames (by setting the MTU to 9000). Still I see now VM Nic;s attached to this network get MTU 1500 and are therefore basically not working. I have created several VMs before all (still) have Jumbo Frames on the their san-interface, but newly created VMs get 1500. Currently on 3.4 Beta2 (upgraded from alpha --> beta1 --->) and this behaviour have started somewhere along the way.. The host physical interface em2 Link encap:Ethernet HWaddr D0:67:E5:F9:2E:1C inet6 addr: fe80::d267:e5ff:fef9:2e1c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:9000 Metric:1 RX packets:503209263 errors:0 dropped:0 overruns:0 frame:0 TX packets:483040537 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2395173035170 (2.1 TiB) TX bytes:408352341106 (380.3 GiB) And on a VM vnet25 Link encap:Ethernet HWaddr FE:1A:4A:2F:D2:A3 inet6 addr: fe80::fc1a:4aff:fe2f:d2a8/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:167 errors:0 dropped:0 overruns:0 frame:0 TX packets:137 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:17662 (17.2 KiB) TX bytes:26684 (26.0 KiB) If manully setting the MTU everything work as expected.. (Until you reboot the machine) Anyone else seen this ? Rgds Jonas
