[ovirt-users] Re: Power Management - drac5
ipmi over lan is allowed, and the user is the root user with admin access.
Also the channel privilege level under ipmi is Administrator.
Will check via cli to see what I get.
________________________________________
From: Jayme <jaymef(a)gmail.com>
Sent: Monday, February 3, 2020 1:23 PM
To: Robert Webb
Cc: users
Subject: Re: [ovirt-users] Power Management - drac5
Also make sure you have "Enable IPMI Over LAN" enabled under idrac settings.
On Mon, Feb 3, 2020 at 2:15 PM Jayme
<jaymef@gmail.com<mailto:jaymef@gmail.com>> wrote:
I recall having a problem similar to this before and it was related to the user
roles/permissions in iDrac. Check what access rights the user has. If that leads no
where you might have some luck testing manually using the fence_idrac5 CLI tool directly
on one of the oVirt hosts
On Mon, Feb 3, 2020 at 2:09 PM Robert Webb
<rwebb@ropeguru.com<mailto:rwebb@ropeguru.com>> wrote:
I have 3 Dell R410's with iDrac6 Enterprise capability. I am trying to get power
management set up but the test will not pass and I am not finding the docs very helpful.
I have put in the IP, user name, password, and drac5 as the type. I have tested both with
and without secure checked and always get, "Test failed: Internal JSON-RPC
error".
idrac log shows:
2020 Feb 3 17:41:22 os[19772] root closing session from 192.168.1.12
2020 Feb 3 17:41:17 os[19746] root login from 192.168.1.12
Can someone please guide me in the right direction?
_______________________________________________
Users mailing list -- users@ovirt.org<mailto:users@ovirt.org>
To unsubscribe send an email to users-leave@ovirt.org<mailto:users-leave@ovirt.org>
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/RKFEK2ORWOO...