On Tue, Sep 22, 2020 at 11:05 PM Jeremey Wise <jeremey.wise(a)gmail.com> wrote:
Correct.. on wwid
I do want to make clear here. that to geta around the error you must ADD (not remove )
drives to /etc/lvm/lvm.conf so oVirt Gluster can complete setup of drives.
[root@thor log]# cat /etc/lvm/lvm.conf |grep filter
# Broken for gluster in oVirt
#filter =
["a|^/dev/disk/by-id/lvm-pv-uuid-AAHPao-R62q-8aac-410x-ZdA7-UL4i-Bh2bwJ$|",
"a|^/dev/disk/by-id/lvm-pv-uuid-bSnFU3-jtUj-AGds-07sw-zdYC-52fM-mujuvC$|",
"r|.*|"]
# working for gluster wizard in oVirt
filter =
["a|^/dev/disk/by-id/lvm-pv-uuid-AAHPao-R62q-8aac-410x-ZdA7-UL4i-Bh2bwJ$|",
"a|^/dev/disk/by-id/lvm-pv-uuid-bSnFU3-jtUj-AGds-07sw-zdYC-52fM-mujuvC$|",
"a|^/dev/disk/by-id/wwn-0x5001b448b847be41$|", "r|.*|"]
Yes, you need to add the devices gluster is going to use to the
filter. The easiest way
it to remove the filter before you install gluster, and then created
the filter using
vdsm-tool config-lvm-filter
It should add all the devices needed for the mounted logical volumes
automatically.
Please file a bug if it does not do this.
On Tue, Sep 22, 2020 at 3:57 PM Strahil Nikolov
<hunter86_bg(a)yahoo.com> wrote:
>
> Obtaining the wwid is not exactly correct.
> You can identify them via:
>
> multipath -v4 | grep 'got wwid of'
>
> Short example:
> [root@ovirt conf.d]# multipath -v4 | grep 'got wwid of'
> Sep 22 22:55:58 | nvme0n1: got wwid of
'nvme.1cc1-324a31313230303131343036-414441544120535838323030504e50-00000001'
> Sep 22 22:55:58 | sda: got wwid of 'TOSHIBA-TR200_Z7KB600SK46S'
> Sep 22 22:55:58 | sdb: got wwid of 'ST500NM0011_Z1M00LM7'
> Sep 22 22:55:58 | sdc: got wwid of 'WDC_WD5003ABYX-01WERA0_WD-WMAYP2303189'
> Sep 22 22:55:58 | sdd: got wwid of 'WDC_WD15EADS-00P8B0_WD-WMAVU0115133'
>
> Of course if you are planing to use only gluster it could be far easier to set:
>
> [root@ovirt conf.d]# cat /etc/multipath/conf.d/blacklist.conf
> blacklist {
> devnode "*"
> }
>
>
>
> Best Regards,
> Strahil Nikolov
>
> В вторник, 22 септември 2020 г., 22:12:21 Гринуич+3, Nir Soffer
<nsoffer(a)redhat.com> написа:
>
>
>
>
>
> On Tue, Sep 22, 2020 at 1:50 AM Jeremey Wise <jeremey.wise(a)gmail.com> wrote:
> >
> >
> > Agree about an NVMe Card being put under mpath control.
>
> NVMe can be used via multipath, this is a new feature added in RHEL 8.1:
>
https://bugzilla.redhat.com/1498546
>
> Of course when the NVMe device is local there is no point to use it
> via multipath.
> To avoid this, you need to blacklist the devices like this:
>
> 1. Find the device wwid
>
> For NVMe, you need the device ID_WWN:
>
> $ udevadm info -q property /dev/nvme0n1 | grep ID_WWN
> ID_WWN=eui.5cd2e42a81a11f69
>
> 2. Add local blacklist file:
>
> $ mkdir /etc/multipath/conf.d
> $ cat /etc/multipath/conf.d/local.conf
> blacklist {
> wwid "eui.5cd2e42a81a11f69"
> }
>
> 3. Reconfigure multipath
>
> $ multipathd reconfigure
>
> Gluster should do this for you automatically during installation, but
> it does not
> you can do this manually.
>
> > I have not even gotten to that volume / issue. My guess is something weird in
CentOS / 4.18.0-193.19.1.el8_2.x86_64 kernel with NVMe block devices.
> >
> > I will post once I cross bridge of getting standard SSD volumes working
> >
> > On Mon, Sep 21, 2020 at 4:12 PM Strahil Nikolov <hunter86_bg(a)yahoo.com>
wrote:
> >>
> >> Why is your NVME under multipath ? That doesn't make sense at all .
> >> I have modified my multipath.conf to block all local disks . Also ,don't
forget the '# VDSM PRIVATE' line somewhere in the top of the file.
> >>
> >> Best Regards,
> >> Strahil Nikolov
> >>
> >>
> >>
> >>
> >>
> >>
> >> В понеделник, 21 септември 2020 г., 09:04:28 Гринуич+3, Jeremey Wise
<jeremey.wise(a)gmail.com> написа:
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> vdo: ERROR - Device /dev/sdc excluded by a filter
> >>
> >>
> >>
> >>
> >> Other server
> >> vdo: ERROR - Device
/dev/mapper/nvme.126f-4141303030303030303030303030303032343538-53504343204d2e32205043496520535344-00000001p1
excluded by a filter.
> >>
> >>
> >> All systems when I go to create VDO volume on blank drives.. I get this
filter error. All disk outside of the HCI wizard setup are now blocked from creating new
Gluster volume group.
> >>
> >> Here is what I see in /dev/lvm/lvm.conf |grep filter
> >> [root@odin ~]# cat /etc/lvm/lvm.conf |grep filter
> >> filter =
["a|^/dev/disk/by-id/lvm-pv-uuid-e1fvwo-kEfX-v3lT-SKBp-cgze-TwsO-PtyvmC$|",
"a|^/dev/disk/by-id/lvm-pv-uuid-mr9awW-oQH5-F4IX-CbEO-RgJZ-x4jK-e4YZS1$|",
"r|.*|"]
> >>
> >> [root@odin ~]# ls -al /dev/disk/by-id/
> >> total 0
> >> drwxr-xr-x. 2 root root 1220 Sep 18 14:32 .
> >> drwxr-xr-x. 6 root root 120 Sep 18 14:32 ..
> >> lrwxrwxrwx. 1 root root 9 Sep 18 22:40
ata-INTEL_SSDSC2BB080G4_BTWL40350DXP080KGN -> ../../sda
> >> lrwxrwxrwx. 1 root root 10 Sep 18 22:40
ata-INTEL_SSDSC2BB080G4_BTWL40350DXP080KGN-part1 -> ../../sda1
> >> lrwxrwxrwx. 1 root root 10 Sep 18 22:40
ata-INTEL_SSDSC2BB080G4_BTWL40350DXP080KGN-part2 -> ../../sda2
> >> lrwxrwxrwx. 1 root root 9 Sep 18 14:32
ata-Micron_1100_MTFDDAV512TBN_17401F699137 -> ../../sdb
> >> lrwxrwxrwx. 1 root root 9 Sep 18 22:40
ata-WDC_WDS100T2B0B-00YS70_183533804564 -> ../../sdc
> >> lrwxrwxrwx. 1 root root 10 Sep 18 16:40 dm-name-cl-home -> ../../dm-2
> >> lrwxrwxrwx. 1 root root 10 Sep 18 16:40 dm-name-cl-root -> ../../dm-0
> >> lrwxrwxrwx. 1 root root 10 Sep 18 16:40 dm-name-cl-swap -> ../../dm-1
> >> lrwxrwxrwx. 1 root root 11 Sep 18 16:40
dm-name-gluster_vg_sdb-gluster_lv_data -> ../../dm-11
> >> lrwxrwxrwx. 1 root root 10 Sep 18 16:40
dm-name-gluster_vg_sdb-gluster_lv_engine -> ../../dm-6
> >> lrwxrwxrwx. 1 root root 11 Sep 18 16:40
dm-name-gluster_vg_sdb-gluster_lv_vmstore -> ../../dm-12
> >> lrwxrwxrwx. 1 root root 10 Sep 18 23:35
dm-name-nvme.126f-4141303030303030303030303030303032343538-53504343204d2e32205043496520535344-00000001
-> ../../dm-3
> >> lrwxrwxrwx. 1 root root 10 Sep 18 23:49
dm-name-nvme.126f-4141303030303030303030303030303032343538-53504343204d2e32205043496520535344-00000001p1
-> ../../dm-4
> >> lrwxrwxrwx. 1 root root 10 Sep 18 14:32 dm-name-vdo_sdb -> ../../dm-5
> >> lrwxrwxrwx. 1 root root 10 Sep 18 16:40
dm-uuid-LVM-GpvYIuypEfrR7nEDn5uHPenKwjrsn4ADc49gc6PWLRBCoJ2B3JC9tDJejyx5eDPT ->
../../dm-1
> >> lrwxrwxrwx. 1 root root 10 Sep 18 16:40
dm-uuid-LVM-GpvYIuypEfrR7nEDn5uHPenKwjrsn4ADOMNJfgcat9ZLOpcNO7FyG8ixcl5s93TU ->
../../dm-2
> >> lrwxrwxrwx. 1 root root 10 Sep 18 16:40
dm-uuid-LVM-GpvYIuypEfrR7nEDn5uHPenKwjrsn4ADzqPGk0yTQ19FIqgoAfsCxWg7cDMtl71r ->
../../dm-0
> >> lrwxrwxrwx. 1 root root 10 Sep 18 16:40
dm-uuid-LVM-ikNfztYY7KGT1SI2WYXPz4DhM2cyTelOq6Om5comvRFWJDbtVZAKtE5YGl4jciP9 ->
../../dm-6
> >> lrwxrwxrwx. 1 root root 11 Sep 18 16:40
dm-uuid-LVM-ikNfztYY7KGT1SI2WYXPz4DhM2cyTelOqVheASEgerWSEIkjM1BR3us3D9ekHt0L ->
../../dm-11
> >> lrwxrwxrwx. 1 root root 11 Sep 18 16:40
dm-uuid-LVM-ikNfztYY7KGT1SI2WYXPz4DhM2cyTelOQz6vXuivIfup6cquKAjPof8wIGOSe4Vz ->
../../dm-12
> >> lrwxrwxrwx. 1 root root 10 Sep 18 23:35
dm-uuid-mpath-nvme.126f-4141303030303030303030303030303032343538-53504343204d2e32205043496520535344-00000001
-> ../../dm-3
> >> lrwxrwxrwx. 1 root root 10 Sep 18 23:49
dm-uuid-part1-mpath-nvme.126f-4141303030303030303030303030303032343538-53504343204d2e32205043496520535344-00000001
-> ../../dm-4
> >> lrwxrwxrwx. 1 root root 10 Sep 18 14:32
dm-uuid-VDO-472035cc-8d2b-40ac-afe9-fa60b62a887f -> ../../dm-5
> >> lrwxrwxrwx. 1 root root 10 Sep 18 14:32
lvm-pv-uuid-e1fvwo-kEfX-v3lT-SKBp-cgze-TwsO-PtyvmC -> ../../dm-5
> >> lrwxrwxrwx. 1 root root 10 Sep 18 22:40
lvm-pv-uuid-mr9awW-oQH5-F4IX-CbEO-RgJZ-x4jK-e4YZS1 -> ../../sda2
> >> lrwxrwxrwx. 1 root root 13 Sep 18 14:32
nvme-nvme.126f-4141303030303030303030303030303032343538-53504343204d2e32205043496520535344-00000001
-> ../../nvme0n1
> >> lrwxrwxrwx. 1 root root 15 Sep 18 14:32
nvme-nvme.126f-4141303030303030303030303030303032343538-53504343204d2e32205043496520535344-00000001-part1
-> ../../nvme0n1p1
> >> lrwxrwxrwx. 1 root root 13 Sep 18 14:32
nvme-SPCC_M.2_PCIe_SSD_AA000000000000002458 -> ../../nvme0n1
> >> lrwxrwxrwx. 1 root root 15 Sep 18 14:32
nvme-SPCC_M.2_PCIe_SSD_AA000000000000002458-part1 -> ../../nvme0n1p1
> >> lrwxrwxrwx. 1 root root 9 Sep 18 22:40
scsi-0ATA_INTEL_SSDSC2BB08_BTWL40350DXP080KGN -> ../../sda
> >> lrwxrwxrwx. 1 root root 10 Sep 18 22:40
scsi-0ATA_INTEL_SSDSC2BB08_BTWL40350DXP080KGN-part1 -> ../../sda1
> >> lrwxrwxrwx. 1 root root 10 Sep 18 22:40
scsi-0ATA_INTEL_SSDSC2BB08_BTWL40350DXP080KGN-part2 -> ../../sda2
> >> lrwxrwxrwx. 1 root root 9 Sep 18 14:32
scsi-0ATA_Micron_1100_MTFD_17401F699137 -> ../../sdb
> >> lrwxrwxrwx. 1 root root 9 Sep 18 22:40
scsi-0ATA_WDC_WDS100T2B0B-_183533804564 -> ../../sdc
> >> lrwxrwxrwx. 1 root root 9 Sep 18 22:40
scsi-1ATA_INTEL_SSDSC2BB080G4_BTWL40350DXP080KGN -> ../../sda
> >> lrwxrwxrwx. 1 root root 10 Sep 18 22:40
scsi-1ATA_INTEL_SSDSC2BB080G4_BTWL40350DXP080KGN-part1 -> ../../sda1
> >> lrwxrwxrwx. 1 root root 10 Sep 18 22:40
scsi-1ATA_INTEL_SSDSC2BB080G4_BTWL40350DXP080KGN-part2 -> ../../sda2
> >> lrwxrwxrwx. 1 root root 9 Sep 18 14:32
scsi-1ATA_Micron_1100_MTFDDAV512TBN_17401F699137 -> ../../sdb
> >> lrwxrwxrwx. 1 root root 9 Sep 18 22:40
scsi-1ATA_WDC_WDS100T2B0B-00YS70_183533804564 -> ../../sdc
> >> lrwxrwxrwx. 1 root root 9 Sep 18 22:40 scsi-35001b448b9608d90 ->
../../sdc
> >> lrwxrwxrwx. 1 root root 9 Sep 18 14:32 scsi-3500a07511f699137 ->
../../sdb
> >> lrwxrwxrwx. 1 root root 9 Sep 18 22:40 scsi-355cd2e404b581cc0 ->
../../sda
> >> lrwxrwxrwx. 1 root root 10 Sep 18 22:40 scsi-355cd2e404b581cc0-part1 ->
../../sda1
> >> lrwxrwxrwx. 1 root root 10 Sep 18 22:40 scsi-355cd2e404b581cc0-part2 ->
../../sda2
> >> lrwxrwxrwx. 1 root root 10 Sep 18 23:35
scsi-nvme.126f-4141303030303030303030303030303032343538-53504343204d2e32205043496520535344-00000001
-> ../../dm-3
> >> lrwxrwxrwx. 1 root root 10 Sep 18 23:49
scsi-nvme.126f-4141303030303030303030303030303032343538-53504343204d2e32205043496520535344-00000001-part1
-> ../../dm-4
> >> lrwxrwxrwx. 1 root root 9 Sep 18 22:40
scsi-SATA_INTEL_SSDSC2BB08_BTWL40350DXP080KGN -> ../../sda
> >> lrwxrwxrwx. 1 root root 10 Sep 18 22:40
scsi-SATA_INTEL_SSDSC2BB08_BTWL40350DXP080KGN-part1 -> ../../sda1
> >> lrwxrwxrwx. 1 root root 10 Sep 18 22:40
scsi-SATA_INTEL_SSDSC2BB08_BTWL40350DXP080KGN-part2 -> ../../sda2
> >> lrwxrwxrwx. 1 root root 9 Sep 18 14:32
scsi-SATA_Micron_1100_MTFD_17401F699137 -> ../../sdb
> >> lrwxrwxrwx. 1 root root 9 Sep 18 22:40
scsi-SATA_WDC_WDS100T2B0B-_183533804564 -> ../../sdc
> >> lrwxrwxrwx. 1 root root 9 Sep 18 22:40 wwn-0x5001b448b9608d90 ->
../../sdc
> >> lrwxrwxrwx. 1 root root 9 Sep 18 14:32 wwn-0x500a07511f699137 ->
../../sdb
> >> lrwxrwxrwx. 1 root root 9 Sep 18 22:40 wwn-0x55cd2e404b581cc0 ->
../../sda
> >> lrwxrwxrwx. 1 root root 10 Sep 18 22:40 wwn-0x55cd2e404b581cc0-part1 ->
../../sda1
> >> lrwxrwxrwx. 1 root root 10 Sep 18 22:40 wwn-0x55cd2e404b581cc0-part2 ->
../../sda2
> >> lrwxrwxrwx. 1 root root 10 Sep 18 23:35
wwn-0xvme.126f-4141303030303030303030303030303032343538-53504343204d2e32205043496520535344-00000001
-> ../../dm-3
> >> lrwxrwxrwx. 1 root root 10 Sep 18 23:49
wwn-0xvme.126f-4141303030303030303030303030303032343538-53504343204d2e32205043496520535344-00000001-part1
-> ../../dm-4
> >> lrwxrwxrwx. 1 root root 15 Sep 18 14:32
wwn-nvme.126f-4141303030303030303030303030303032343538-53504343204d2e32205043496520535344-00000001-part1
-> ../../nvme0n1p1
> >> [root@odin ~]# ls -al /dev/disk/by-id/
> >>
> >> So filter notes three objects:
> >> lvm-pv-uuid-e1fvwo.... -> dm-5 ->vdo_sdb (used by HCI for all the
three gluster base volumes )
> >> lvm-pv-uuid-mr9awW... -> sda2 -> boot volume
> >>
> >> [root@odin ~]# lsblk
> >> NAME
MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
> >> sda
8:0 0 74.5G 0 disk
> >> ├─sda1
8:1 0 1G 0 part /boot
> >> └─sda2
8:2 0 73.5G 0 part
> >> ├─cl-root
253:0 0 44.4G 0 lvm /
> >> ├─cl-swap
253:1 0 7.5G 0 lvm [SWAP]
> >> └─cl-home
253:2 0 21.7G 0 lvm /home
> >> sdb
8:16 0 477G 0 disk
> >> └─vdo_sdb
253:5 0 2.1T 0 vdo
> >> ├─gluster_vg_sdb-gluster_lv_engine
253:6 0 100G 0 lvm /gluster_bricks/engine
> >> ├─gluster_vg_sdb-gluster_thinpool_gluster_vg_sdb_tmeta
253:7 0 1G 0 lvm
> >> │ └─gluster_vg_sdb-gluster_thinpool_gluster_vg_sdb-tpool
253:9 0 2T 0 lvm
> >> │ ├─gluster_vg_sdb-gluster_thinpool_gluster_vg_sdb
253:10 0 2T 1 lvm
> >> │ ├─gluster_vg_sdb-gluster_lv_data
253:11 0 1000G 0 lvm /gluster_bricks/data
> >> │ └─gluster_vg_sdb-gluster_lv_vmstore
253:12 0 1000G 0 lvm /gluster_bricks/vmstore
> >> └─gluster_vg_sdb-gluster_thinpool_gluster_vg_sdb_tdata
253:8 0 2T 0 lvm
> >> └─gluster_vg_sdb-gluster_thinpool_gluster_vg_sdb-tpool
253:9 0 2T 0 lvm
> >> ├─gluster_vg_sdb-gluster_thinpool_gluster_vg_sdb
253:10 0 2T 1 lvm
> >> ├─gluster_vg_sdb-gluster_lv_data
253:11 0 1000G 0 lvm /gluster_bricks/data
> >> └─gluster_vg_sdb-gluster_lv_vmstore
253:12 0 1000G 0 lvm /gluster_bricks/vmstore
> >> sdc
8:32 0 931.5G 0 disk
> >> nvme0n1
259:0 0 953.9G 0 disk
> >>
├─nvme.126f-4141303030303030303030303030303032343538-53504343204d2e32205043496520535344-00000001
253:3 0 953.9G 0 mpath
> >> │
└─nvme.126f-4141303030303030303030303030303032343538-53504343204d2e32205043496520535344-00000001p1
253:4 0 953.9G 0 part
> >> └─nvme0n1p1
> >>
> >> So I don't think this is LVM filtering things
> >>
> >> Multipath showing weird treatment of the NVMe drive.. but that is outside
this converstation
> >> [root@odin ~]# multipath -l
> >>
nvme.126f-4141303030303030303030303030303032343538-53504343204d2e32205043496520535344-00000001
dm-3 NVME,SPCC M.2 PCIe SSD
> >> size=954G features='1 queue_if_no_path' hwhandler='0' wp=rw
> >> `-+- policy='service-time 0' prio=0 status=active
> >> `- 0:1:1:1 nvme0n1 259:0 active undef running
> >> [root@odin ~]#
> >>
> >> Where is getting this filter.
> >> I have done gdisk /dev/sdc ( new 1TB Drive) and shows no partition. I even
did a full dd if=/dev/zero and no change.
> >>
> >> I reloaded OS on system to get through wizard setup. Now that all three
nodes are in the HCI cluster.. all six drives (2 x 1TB in each server) are now locked
from any use due to this error about filter.
> >>
> >> Ideas?
> >>
> >> --
> >> jeremey.wise(a)gmail.com
> >> _______________________________________________
> >> Users mailing list -- users(a)ovirt.org
> >> To unsubscribe send an email to users-leave(a)ovirt.org
> >> Privacy Statement:
https://www.ovirt.org/privacy-policy.html
> >> oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
> >> List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/JIG3DCS72QC...
> >
> >
> >
> > --
> > jeremey.wise(a)gmail.com
> > _______________________________________________
> > Users mailing list -- users(a)ovirt.org
> > To unsubscribe send an email to users-leave(a)ovirt.org
> > Privacy Statement:
https://www.ovirt.org/privacy-policy.html
> > oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
> > List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/2NNMZUSENFJ...
>
> _______________________________________________
> Users mailing list -- users(a)ovirt.org
> To unsubscribe send an email to users-leave(a)ovirt.org
> Privacy Statement:
https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
>
https://lists.ovirt.org/archives/list/users@ovirt.org/message/62X4ELFAMPU...
>
--
jeremey.wise(a)gmail.com