Re: [ovirt-users] oVirt Hosted Engine Setup fails

Sure, but first we need to understand what it's happening: in our CI process everything is fine so I think it's something specific to your env. Could you please share your: /var/log/libvirt/qemu/HostedEngine.log /var/log/messages thanks, Simone On Tue, May 2, 2017 at 11:38 AM, Manuel Luis Aznar < manuel.luis.aznar(a)gmail.com&gt; wrote: > Ok thankyou. > > Suppose that this problem probably would be solve in a future release. > > Thanks, > Manuel > > 2017-05-02 10:35 GMT+01:00 Simone Tiraboschi <stirabos(a)redhat.com&gt;: > >> >> >> On Tue, May 2, 2017 at 11:30 AM, Manuel Luis Aznar < >> manuel.luis.aznar(a)gmail.com&gt; wrote: >> >>> Hello there again, >>> >>> Yes as I say, I have done several clean installations and the VM engine >>> sometimes starts without any problem. So Simone any recommendation to make >>> the engine VM starts properly?¿ >>> >>> While is installing the HA agent and HA broker are down, would I get >>> good result by starting the services myself?¿ >>> >>> Any help from Simone or somebody would be appreciated >>> Thanks for all in advance >>> Manuel Luis Aznar >>> >> >> I suggest to check libvirt logs. >> >> >>> >>> 2017-05-02 7:54 GMT+01:00 Simone Tiraboschi <stirabos(a)redhat.com&gt;: >>> >>>> >>>> >>>> On Mon, May 1, 2017 at 3:14 PM, Manuel Luis Aznar < >>>> manuel.luis.aznar(a)gmail.com&gt; wrote: >>>> >>>>> Hello there, >>>>> >>>>> I have been looking in the internet using google why my installation >>>>> of ovirt-hosted-engine is failing. >>>>> >>>>> I have found this link: >>>>> >>>>> https://www.mail-archive.com/users@ovirt.org/msg40864.html >>>>> (Hosted engine install failed; vdsm upset about broker) >>>>> >>>>> It seems to be the same error... >>>>> >>>>> So to knarra and Jamie Lawrence my question is: >>>>> >>>>> Did you manage to discover the problem?? In my instalation I am >>>>> using nfs and not gluster... >>>>> >>>>> I have read the error and is the same error "BrokerConnectionError: >>>>> ...". The ovirt-ha-agent and ovirt-ha-broker did not start when the >>>>> installation is creating the engine VM... >>>>> >>>> >>>> This is just a false positive: the HA agent and the HA broker are >>>> still down so vdsm is complaining but at that point it's absolutely fine by >>>> itself since the engine VM still doesn't exists. >>>> We already have an open bug to reduce the impact of that message. >>>> >>>> The real issue is that for some reason the engine VM could not start >>>> on your system. >>>> >>>> >>>>> >>>>> As I have said before any help would be very appreciated...no matter >>>>> whom will give it >>>>> Thanks for all in advance >>>>> Manuel Luis Aznar >>>>> >>>>> >>>>> >>>>> 2017-05-01 12:21 GMT+01:00 Manuel Luis Aznar < >>>>> manuel.luis.aznar(a)gmail.com&gt;: >>>>> >>>>>> Hello Simone and all the comunity, >>>>>> >>>>>> I have been doing the instalation of ovirt hosted engine again and >>>>>> it fails, libvirtd and vdsmd services are failing. They are failing with >>>>>> the following errors: >>>>>> >>>>>> >>>>>> libvirt daemon >>>>>> >>>>>> libvirtd.service - Virtualization daemon >>>>>> Loaded: loaded (/usr/lib/systemd/system/libvirtd.service; >>>>>> enabled; vendor preset: enabled) >>>>>> Drop-In: /etc/systemd/system/libvirtd.service.d >>>>>> ââunlimited-core.conf >>>>>> Active: active (running) since lun 2017-05-01 11:43:49 WEST; >>>>>> 14min ago >>>>>> Docs: man:libvirtd(8) >>>>>> http://libvirt.org >>>>>> Main PID: 21993 (libvirtd) >>>>>> CGroup: /system.slice/libvirtd.service >>>>>> ââ21993 /usr/sbin/libvirtd --listen >>>>>> >>>>>> may 01 11:43:49 host1.bajada.es systemd[1]: Starting Virtualization >>>>>> daemon... >>>>>> may 01 11:43:49 host1.bajada.es systemd[1]: Started Virtualization >>>>>> daemon. >>>>>> may 01 11:47:45 host1.bajada.es libvirtd[21993]: libvirt version: >>>>>> 2.0.0, package: 10.el7_3.5 (CentOS BuildSystem < >>>>>> http://bugs.centos.org>;, 2017-03-03-02:09:45, c1bm.rdu2.centos.org) >>>>>> may 01 11:47:45 host1.bajada.es libvirtd[21993]: hostname: >>>>>> host1.bajada.es >>>>>> may 01 11:47:45 host1.bajada.es libvirtd[21993]: Falló al conectar >>>>>> con el socket de monitor: No existe el proceso >>>>>> may 01 11:47:45 host1.bajada.es libvirtd[21993]: internal error: >>>>>> process exited while connecting to monitor: /dev/random -device >>>>>> virtio-rng-pci,rng=objrng0,id=rng0,bus=pci.0,addr=0x7 -msg >>>>>> timestamp=on >>>>>> Could not access >>>>>> KVM kernel module: Permission denied >>>>>> failed to >>>>>> initialize KVM: Permission denied >>>>>> >>>>>> vdsm daemon >>>>>> >>>>>> vdsmd.service - Virtual Desktop Server Manager >>>>>> Loaded: loaded (/usr/lib/systemd/system/vdsmd.service; enabled; >>>>>> vendor preset: enabled) >>>>>> Active: active (running) since lun 2017-05-01 11:43:51 WEST; >>>>>> 15min ago >>>>>> Main PID: 22119 (vdsm) >>>>>> CGroup: /system.slice/vdsmd.service >>>>>> ââ22119 /usr/bin/python2 /usr/share/vdsm/vdsm >>>>>> ââ22612 /usr/libexec/ioprocess --read-pipe-fd 68 >>>>>> --write-pipe-fd 67 --max-threads 10 --max-queued-requests 10 >>>>>> ââ22630 /usr/libexec/ioprocess --read-pipe-fd 76 >>>>>> --write-pipe-fd 75 --max-threads 10 --max-queued-requests 10 >>>>>> ââ22887 /usr/libexec/ioprocess --read-pipe-fd 44 >>>>>> --write-pipe-fd 43 --max-threads 10 --max-queued-requests 10 >>>>>> ââ22893 /usr/libexec/ioprocess --read-pipe-fd 52 >>>>>> --write-pipe-fd 50 --max-threads 10 --max-queued-requests 10 >>>>>> >>>>>> may 01 11:58:37 host1.bajada.es vdsm[22119]: vdsm >>>>>> ovirt_hosted_engine_ha.lib.brokerlink.BrokerLink ERROR Failed to >>>>>> connect to broker, the number of errors has exceeded the limit (1) >>>>>> may 01 11:58:37 host1.bajada.es vdsm[22119]: vdsm root ERROR failed >>>>>> to retrieve Hosted Engine HA info >>>>>> Traceback (most recent >>>>>> call last): >>>>>> File >>>>>> "/usr/lib/python2.7/site-packages/vdsm/host/api.py", line 231, in >>>>>> _getHaInfo >>>>>> stats = >>>>>> instance.get_all_stats() >>>>>> File >>>>>> "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/client/client.py", >>>>>> line 102, in get_all_stats >>>>>> with >>>>>> broker.connection(self._retries, self._wait): >>>>>> File >>>>>> "/usr/lib64/python2.7/contextlib.py", line 17, in __enter__ >>>>>> return >>>>>> self.gen.next() >>>>>> File >>>>>> "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/lib/brokerlink.py", >>>>>> line 99, in connection >>>>>> >>>>>> self.connect(retries, wait) >>>>>> File >>>>>> "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/lib/brokerlink.py", >>>>>> line 78, in connect >>>>>> raise >>>>>> BrokerConnectionError(error_msg) >>>>>> BrokerConnectionError: >>>>>> Failed to connect to broker, the number of errors has exceeded the limit (1) >>>>>> may 01 11:58:52 host1.bajada.es vdsm[22119]: vdsm >>>>>> ovirt_hosted_engine_ha.lib.brokerlink.BrokerLink ERROR Failed to >>>>>> connect to broker, the number of errors has exceeded the limit (1) >>>>>> >>>>>> I have been looking to the ovirt mailing list (and also internet >>>>>> looking up in google) but I dont get what is the problem. >>>>>> >>>>>> I have attached to the mail the vdsm, ovirt-hosted-engine-setup and >>>>>> the answer of the installation. In the vdsm.log I got the following error: >>>>>> >>>>>> libvirtError: internal error: process exited while connecting to >>>>>> monitor: /dev/random -device virtio-rng-pci,rng=objrng0,id=rng0,bus=pci.0,addr=0x7 >>>>>> -msg timestamp=on >>>>>> Could not access KVM kernel module: Permission denied >>>>>> failed to initialize KVM: Permission denied >>>>>> >>>>>> I have been looking for that error but I dont get anything clear, so >>>>>> I will greatly appreciate the help of somebody... >>>>>> >>>>>> The KVM modules are loaded because if I fired up this "lsmod | grep >>>>>> kvm" I get the following: >>>>>> >>>>>> kvm_intel 170181 0 >>>>>> kvm 554609 1 kvm_intel >>>>>> irqbypass 13503 1 kvm >>>>>> >>>>>> Also the group owner of /dev/kvm is: >>>>>> >>>>>> crw-rw-rw-+ 1 root kvm 10, 232 may 1 01:26 /dev/kvm >>>>>> >>>>>> Hope somebody could help >>>>>> Thanks for all in advance >>>>>> Manuel Luis Aznar >>>>>> >>>>>> >>>>>> >>>>>> 2017-03-15 11:58 GMT+00:00 Manuel Luis Aznar < >>>>>> manuel.luis.aznar(a)gmail.com&gt;: >>>>>> >>>>>>> Hello there again, >>>>>>> >>>>>>> Yes that is correct. I interrupted the setup with Ctrl+C. That was >>>>>>> because while I was answering, at the same time, I was looking at this >>>>>>> file, and I saw this: >>>>>>> >>>>>>> FAILED: conflicting vdsm and libvirt-qemu tls configuration. >>>>>>> vdsm.conf with ssl=True requires the following changes: >>>>>>> libvirtd.conf: listen_tcp=0, auth_tcp="sasl", listen_tls=1 >>>>>>> qemu.conf: spice_tls=1. >>>>>>> >>>>>>> So I decided to interrupt the installation, because of the error, >>>>>>> edit the files (vdsm.conf and qemu.conf) and then I executed the >>>>>>> installation again and it was successful. It seams that the change of the >>>>>>> values in that files, in my case, produced a successful instalation. >>>>>>> >>>>>>> Sorry if my english is hard to understand, now you understand what >>>>>>> I did. >>>>>>> >>>>>>> Any question, remark just go ahead >>>>>>> >>>>>>> Thanks, >>>>>>> Manuel >>>>>>> >>>>>>> >>>>>>> >>>>>>> 2017-03-15 11:22 GMT+00:00 Simone Tiraboschi <stirabos(a)redhat.com&gt;: >>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> On Wed, Mar 15, 2017 at 12:17 PM, Manuel Luis Aznar < >>>>>>>> manuel.luis.aznar(a)gmail.com&gt; wrote: >>>>>>>> >>>>>>>>> Hello Simone, >>>>>>>>> >>>>>>>>> The quoted lines on your last message are on lines 1238-1245 on >>>>>>>>> the attached log ovirt-hosted-engine-setup file. >>>>>>>>> >>>>>>>>> That file is the first hosted-engine setup. But this log file is >>>>>>>>> not the result of a host-engine-setup file. I start with the installation >>>>>>>>> and while I was answering the question I was looking to this log file for >>>>>>>>> errors and when I found this errors I stopped and done this: >>>>>>>>> >>>>>>>>> FAILED: conflicting vdsm and libvirt-qemu tls configuration. >>>>>>>>> vdsm.conf with ssl=True requires the following changes: >>>>>>>>> libvirtd.conf: listen_tcp=0, auth_tcp="sasl", listen_tls=1 >>>>>>>>> qemu.conf: spice_tls=1. >>>>>>>>> >>>>>>>>> Previously to this installation I have done several installations >>>>>>>>> without revising this log file and always getting failed installations. >>>>>>>>> >>>>>>>>> Please its important to note that: >>>>>>>>> >>>>>>>>> The currently setup which we are talking about was using >>>>>>>>> repo "ovirt-release41-pre.rpm". After correcting that two files >>>>>>>>> I do the installation and in the end it was completed successfully. >>>>>>>>> >>>>>>>>> When I have some time I will try to install again using the >>>>>>>>> realease repo "ovirt-release41.rpm" >>>>>>>>> >>>>>>>>> If you have any explanation, question or remark, please go >>>>>>>>> ahead... >>>>>>>>> >>>>>>>> >>>>>>>> From the attached logs it seams that you voluntary interrupted the >>>>>>>> setup from keyboard here: >>>>>>>> 2017-03-07 11:23:17 DEBUG otopi.plugins.otopi.dialog.human >>>>>>>> dialog.__logString:204 DIALOG:SEND iptables was detected on >>>>>>>> your computer, do you wish setup to configure it? (Yes, No)[Yes]: >>>>>>>> 2017-03-07 12:06:15 DEBUG otopi.context context._executeMethod:142 >>>>>>>> method exception >>>>>>>> Traceback (most recent call last): >>>>>>>> File "/usr/lib/python2.7/site-packages/otopi/context.py", line >>>>>>>> 132, in _executeMethod >>>>>>>> method['method']() >>>>>>>> File "/usr/share/ovirt-hosted-engin >>>>>>>> e-setup/scripts/../plugins/gr-he-setup/network/firewall_manager.py", >>>>>>>> line 157, in _customization >>>>>>>> default=_('Yes'), >>>>>>>> File "/usr/share/otopi/plugins/otopi/dialog/human.py", line >>>>>>>> 177, in queryString >>>>>>>> value = self._readline(hidden=hidden) >>>>>>>> File "/usr/lib/python2.7/site-packages/otopi/dialog.py", line >>>>>>>> 246, in _readline >>>>>>>> value = self.__input.readline() >>>>>>>> File "/usr/lib/python2.7/site-packages/otopi/main.py", line 53, >>>>>>>> in _signal >>>>>>>> raise RuntimeError("SIG%s" % signum) >>>>>>>> RuntimeError: SIG2 >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>>> >>>>>>>>> I will report back. >>>>>>>>> Thanks for all in advance >>>>>>>>> Manuel >>>>>>>>> >>>>>>>>> 2017-03-13 17:29 GMT+00:00 Simone Tiraboschi <stirabos(a)redhat.com >>>>>>>>> >: >>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> On Mon, Mar 13, 2017 at 4:08 PM, Manuel Luis Aznar < >>>>>>>>>> manuel.luis.aznar(a)gmail.com&gt; wrote: >>>>>>>>>> >>>>>>>>>>> Hello to all there again, >>>>>>>>>>> >>>>>>>>>>> I was having some troubles while installing ovirt Hosted >>>>>>>>>>> Engine, I took some look at the hosted engine setup logs while I was >>>>>>>>>>> running the hosted-engine --deploy and I found the following in the ovirt >>>>>>>>>>> hosted engine setup logs: >>>>>>>>>>> >>>>>>>>>>> lvm requires configuration >>>>>>>>>>> libvirt is not configured for vdsm yet >>>>>>>>>>> FAILED: conflicting vdsm and libvirt-qemu tls configuration. >>>>>>>>>>> vdsm.conf with ssl=True requires the following changes: >>>>>>>>>>> libvirtd.conf: listen_tcp=0, auth_tcp="sasl", listen_tls=1 >>>>>>>>>>> qemu.conf: spice_tls=1. >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> hosted-engine setup is already running vdsm-tool configure >>>>>>>>>> --force so it should configure libvirt and qemu for you, not sure why it >>>>>>>>>> failed. >>>>>>>>>> Could you please attach the logs from the failed >>>>>>>>>> hosted-engine-setup run? >>>>>>>>>> >>>>>>>>>> >>>>>>>>>>> When I saw this I stopped the setup and edited this two files >>>>>>>>>>> (vdsm.conf and qemu.conf) set the stated configurations and run the deploy >>>>>>>>>>> again. All was fine and I dont have any trouble the installation finished >>>>>>>>>>> successfully. This was using ovirt-release41-pre.rpm repo. >>>>>>>>>>> >>>>>>>>>>> I will be trying the same installation with ovirt-release41.rpm >>>>>>>>>>> (when I have time) and I will report what happened. >>>>>>>>>>> >>>>>>>>>>> Thanks for all >>>>>>>>>>> Manuel Luis Aznar >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> 2017-03-06 1:31 GMT+00:00 Manuel Luis Aznar < >>>>>>>>>>> manuel.luis.aznar(a)gmail.com&gt;: >>>>>>>>>>> >>>>>>>>>>>> Hey there, >>>>>>>>>>>> >>>>>>>>>>>> I have been loking around, of course as of now the following I >>>>>>>>>>>> am going to say I suppose is not anything new to you: >>>>>>>>>>>> >>>>>>>>>>>> This is the status of libvirtd: >>>>>>>>>>>> >>>>>>>>>>>> â libvirtd.service - Virtualization daemon >>>>>>>>>>>> Loaded: loaded (/usr/lib/systemd/system/libvirtd.service; >>>>>>>>>>>> enabled; vendor preset: enabled) >>>>>>>>>>>> Drop-In: /etc/systemd/system/libvirtd.service.d >>>>>>>>>>>> ââunlimited-core.conf >>>>>>>>>>>> Active: active (running) since lun 2017-03-06 01:25:05 WET; >>>>>>>>>>>> 1min 37s ago >>>>>>>>>>>> Docs: man:libvirtd(8) >>>>>>>>>>>> http://libvirt.org >>>>>>>>>>>> Main PID: 24350 (libvirtd) >>>>>>>>>>>> CGroup: /system.slice/libvirtd.service >>>>>>>>>>>> ââ24350 /usr/sbin/libvirtd --listen >>>>>>>>>>>> >>>>>>>>>>>> mar 06 01:25:05 host1.bajada.es systemd[1]: Starting >>>>>>>>>>>> Virtualization daemon... >>>>>>>>>>>> mar 06 01:25:05 host1.bajada.es systemd[1]: Started >>>>>>>>>>>> Virtualization daemon. >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> After looking at the state I fire up the VM engine with the >>>>>>>>>>>> command "hosted-engine --vm-start" and I got the following: >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> VM exists and is down, destroying it >>>>>>>>>>>> Machine destroyed >>>>>>>>>>>> >>>>>>>>>>>> ed786811-0321-431e-be4b-2d03764c1b02 >>>>>>>>>>>> Status = WaitForLaunch >>>>>>>>>>>> nicModel = rtl8139,pv >>>>>>>>>>>> statusTime = 4374100040 <(437)%20410-0040> >>>>>>>>>>>> emulatedMachine = pc >>>>>>>>>>>> pid = 0 >>>>>>>>>>>> vmName = HostedEngine >>>>>>>>>>>> devices = [{'index': '2', 'iface': 'ide', >>>>>>>>>>>> 'specParams': {}, 'readonly': 'true', 'deviceId': >>>>>>>>>>>> '506df4eb-e783-4451-a8a6-993fa4dbb381', 'address': {'bus': >>>>>>>>>>>> '1', 'controller': '0', 'type': 'drive', 'target': '0', 'unit': '0'}, >>>>>>>>>>>> 'device': 'cdrom', 'shared': 'false', 'path': '', 'type': 'disk'}, >>>>>>>>>>>> {'index': '0', 'iface': 'virtio', 'format': 'raw', 'bootOrder': '1', >>>>>>>>>>>> 'poolID': '00000000-0000-0000-0000-000000000000', 'volumeID': >>>>>>>>>>>> '2bc39472-1a4b-4c7d-8ef9-1212182ad802', 'imageID': >>>>>>>>>>>> '08288fcf-6b12-4bd1-84d3-259992e7aa6d', 'specParams': {}, >>>>>>>>>>>> 'readonly': 'false', 'domainID': 'f44afe8d-56f9-4e1e-beee-4daa548dbad8', >>>>>>>>>>>> 'optional': 'false', 'deviceId': '08288fcf-6b12-4bd1-84d3-259992e7aa6d', >>>>>>>>>>>> 'address': {'slot': '0x06', 'bus': '0x00', 'domain': '0x0000', 'type': >>>>>>>>>>>> 'pci', 'function': '0x0'}, 'device': 'disk', 'shared': 'exclusive', >>>>>>>>>>>> 'propagateErrors': 'off', 'type': 'disk'}, {'device': 'scsi', 'model': >>>>>>>>>>>> 'virtio-scsi', 'type': 'controller'}, {'nicModel': 'pv', 'macAddr': >>>>>>>>>>>> '00:16:3e:65:a6:4e', 'linkActive': 'true', 'network': 'ovirtmgmt', >>>>>>>>>>>> 'specParams': {}, 'deviceId': '84b82c6c-bcca-4983-82d5-8d1e3ab3811a', >>>>>>>>>>>> 'address': {'slot': '0x03', 'bus': '0x00', 'domain': '0x0000', 'type': >>>>>>>>>>>> 'pci', 'function': '0x0'}, 'device': 'bridge', 'type': 'interface'}, >>>>>>>>>>>> {'device': 'console', 'specParams': {}, 'type': 'console', 'deviceId': >>>>>>>>>>>> '6236af73-8dab-4d14-b950-fb4ad01d4420', 'alias': 'console0'}, >>>>>>>>>>>> {'device': 'vga', 'alias': 'video0', 'type': 'video'}, {'device': 'virtio', >>>>>>>>>>>> 'specParams': {'source': 'random'}, 'model': 'virtio', 'type': 'rng'}] >>>>>>>>>>>> guestDiskMapping = {} >>>>>>>>>>>> vmType = kvm >>>>>>>>>>>> clientIp = >>>>>>>>>>>> displaySecurePort = -1 >>>>>>>>>>>> memSize = 4096 >>>>>>>>>>>> displayPort = -1 >>>>>>>>>>>> cpuType = Broadwell >>>>>>>>>>>> spiceSecureChannels = smain,sdisplay,sinputs,scursor >>>>>>>>>>>> ,splayback,srecord,ssmartcard,susbredir >>>>>>>>>>>> smp = 2 >>>>>>>>>>>> displayIp = 0 >>>>>>>>>>>> display = vnc >>>>>>>>>>>> maxVCpus = 6 >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> After that if I look again at the status of libvirtd I obtain: >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> â libvirtd.service - Virtualization daemon >>>>>>>>>>>> Loaded: loaded (/usr/lib/systemd/system/libvirtd.service; >>>>>>>>>>>> enabled; vendor preset: enabled) >>>>>>>>>>>> Drop-In: /etc/systemd/system/libvirtd.service.d >>>>>>>>>>>> ââunlimited-core.conf >>>>>>>>>>>> Active: active (running) since lun 2017-03-06 01:25:05 WET; >>>>>>>>>>>> 5min ago >>>>>>>>>>>> Docs: man:libvirtd(8) >>>>>>>>>>>> http://libvirt.org >>>>>>>>>>>> Main PID: 24350 (libvirtd) >>>>>>>>>>>> CGroup: /system.slice/libvirtd.service >>>>>>>>>>>> ââ24350 /usr/sbin/libvirtd --listen >>>>>>>>>>>> >>>>>>>>>>>> mar 06 01:25:05 host1.bajada.es systemd[1]: Starting >>>>>>>>>>>> Virtualization daemon... >>>>>>>>>>>> mar 06 01:25:05 host1.bajada.es systemd[1]: Started >>>>>>>>>>>> Virtualization daemon. >>>>>>>>>>>> mar 06 01:29:39 host1.bajada.es libvirtd[24350]: libvirt >>>>>>>>>>>> version: 2.0.0, package: 10.el7_3.5 (CentOS BuildSystem < >>>>>>>>>>>> http://bugs.centos.org>;, 2017-03-03-02:09:45, >>>>>>>>>>>> c1bm.rdu2.centos.org) >>>>>>>>>>>> mar 06 01:29:39 host1.bajada.es libvirtd[24350]: hostname: >>>>>>>>>>>> host1.bajada.es >>>>>>>>>>>> mar 06 01:29:39 host1.bajada.es libvirtd[24350]: Falló al >>>>>>>>>>>> conectar con el socket de monitor: No existe el proceso >>>>>>>>>>>> mar 06 01:29:39 host1.bajada.es libvirtd[24350]: internal >>>>>>>>>>>> error: process exited while connecting to monitor: Could not access KVM >>>>>>>>>>>> kernel module: Permission denied >>>>>>>>>>>> failed to >>>>>>>>>>>> initialize KVM: Permission denied >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> So the libvirtd is the problem, as i said this is nothing new >>>>>>>>>>>> to you of course... >>>>>>>>>>>> >>>>>>>>>>>> Thanks again for any help >>>>>>>>>>>> Manuel >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> 2017-03-05 18:51 GMT+00:00 Manuel Luis Aznar < >>>>>>>>>>>> manuel.luis.aznar(a)gmail.com&gt;: >>>>>>>>>>>> >>>>>>>>>>>>> Hey there again, >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> Can you check if you have KVM modules loaded? >>>>>>>>>>>>> >>>>>>>>>>>>> In order to check that I fire up the following command: >>>>>>>>>>>>> "lsmod | grep kvm" >>>>>>>>>>>>> >>>>>>>>>>>>> Result was: >>>>>>>>>>>>> >>>>>>>>>>>>> kvm_intel 170181 0 >>>>>>>>>>>>> kvm 554609 1 kvm_intel >>>>>>>>>>>>> irqbypass 13503 1 kvm >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> Also check group owner for "/dev/kvm". I fire this: "ls -la >>>>>>>>>>>>> /dev/kvm". The result was: >>>>>>>>>>>>> >>>>>>>>>>>>> crw-rw-rw-+ 1 root kvm 10, 232 mar 5 03:35 /dev/kvm >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> Also I check if there were some remain packages pending to >>>>>>>>>>>>> install for kvm and qemu and I got: >>>>>>>>>>>>> >>>>>>>>>>>>> yum install \*kvm\* >>>>>>>>>>>>> >>>>>>>>>>>>> The result is, that the system need to install the following: >>>>>>>>>>>>> >>>>>>>>>>>>> Instalando: >>>>>>>>>>>>> centos-release-qemu-ev noarch >>>>>>>>>>>>> 1.0-1.el7 extras >>>>>>>>>>>>> 11 k >>>>>>>>>>>>> qemu-guest-agent x86_64 >>>>>>>>>>>>> 10:2.5.0-3.el7 base >>>>>>>>>>>>> 133 k >>>>>>>>>>>>> qemu-kvm-ev-debuginfo x86_64 >>>>>>>>>>>>> 10:2.6.0-28.el7_3.3.1 ovirt-4.0 12 M >>>>>>>>>>>>> vdsm-hook-faqemu noarch >>>>>>>>>>>>> 4.18.21-1.el7.centos ovirt-4.0 >>>>>>>>>>>>> 15 k >>>>>>>>>>>>> vdsm-hook-qemucmdline noarch >>>>>>>>>>>>> 4.18.21-1.el7.centos ovirt-4.0 >>>>>>>>>>>>> 11 k >>>>>>>>>>>>> Instalando para las dependencias: >>>>>>>>>>>>> centos-release-virt-common noarch >>>>>>>>>>>>> 1-1.el7.centos extras >>>>>>>>>>>>> 4.5 k >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> Checking libvirtd service status I got: >>>>>>>>>>>>> >>>>>>>>>>>>> libvirtd.service - Virtualization daemon >>>>>>>>>>>>> Loaded: loaded (/usr/lib/systemd/system/libvirtd.service; >>>>>>>>>>>>> enabled; vendor preset: enabled) >>>>>>>>>>>>> Drop-In: /etc/systemd/system/libvirtd.service.d >>>>>>>>>>>>> ââunlimited-core.conf >>>>>>>>>>>>> Active: active (running) since dom 2017-03-05 15:56:11 >>>>>>>>>>>>> WET; 2h 51min ago >>>>>>>>>>>>> Docs: man:libvirtd(8) >>>>>>>>>>>>> http://libvirt.org >>>>>>>>>>>>> Main PID: 19415 (libvirtd) >>>>>>>>>>>>> CGroup: /system.slice/libvirtd.service >>>>>>>>>>>>> 19415 /usr/sbin/libvirtd --listen >>>>>>>>>>>>> >>>>>>>>>>>>> mar 05 15:56:10 host1.bajada.es systemd[1]: Starting >>>>>>>>>>>>> Virtualization daemon... >>>>>>>>>>>>> mar 05 15:56:11 host1.bajada.es systemd[1]: Started >>>>>>>>>>>>> Virtualization daemon. >>>>>>>>>>>>> mar 05 16:00:04 host1.bajada.es libvirtd[19415]: libvirt >>>>>>>>>>>>> version: 2.0.0, package: 10.el7_3.5 (CentOS BuildSystem < >>>>>>>>>>>>> http://bugs.centos.org>;, 2017-03-03-02:09:45, >>>>>>>>>>>>> c1bm.rdu2.centos.org) >>>>>>>>>>>>> mar 05 16:00:04 host1.bajada.es libvirtd[19415]: hostname: >>>>>>>>>>>>> host1.bajada.es >>>>>>>>>>>>> mar 05 16:00:04 host1.bajada.es libvirtd[19415]: Failed to >>>>>>>>>>>>> connect to the socket monitor: process does not exits >>>>>>>>>>>>> >>>>>>>>>>>>> (Fallo al conectar con el socket de monitor: No existe el proceso) >>>>>>>>>>>>> mar 05 16:00:04 host1.bajada.es libvirtd[19415]: internal >>>>>>>>>>>>> error: process exited while connecting to monitor: Could not access KVM >>>>>>>>>>>>> kernel module: Permission denied >>>>>>>>>>>>> failed to >>>>>>>>>>>>> initialize KVM: Permission denied >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> Thanks for all in advance >>>>>>>>>>>>> I will be waiting for you. Any help appreciated >>>>>>>>>>>>> Manuel >>>>>>>>>>>>> >>>>>>>>>>>>> 2017-03-05 17:33 GMT+00:00 Artyom Lukianov < >>>>>>>>>>>>> alukiano(a)redhat.com&gt;: >>>>>>>>>>>>> >>>>>>>>>>>>>> I found this one under the vdsm log: >>>>>>>>>>>>>> libvirtError: internal error: process exited while >>>>>>>>>>>>>> connecting to monitor: Could not access KVM kernel module: Permission denied >>>>>>>>>>>>>> failed to initialize KVM: Permission denied >>>>>>>>>>>>>> Thread-70::INFO::2017-03-05 16:00:04,325::vm::1330::virt.vm::(setDownStatus) >>>>>>>>>>>>>> vmId=`ed786811-0321-431e-be4b-2d03764c1b02`::Changed state >>>>>>>>>>>>>> to Down: internal error: process exited while connecting to monitor: Could >>>>>>>>>>>>>> not access KVM kernel module: Permission denied >>>>>>>>>>>>>> failed to initialize KVM: Permission denied (code=1) >>>>>>>>>>>>>> Thread-70::INFO::2017-03-05 16:00:04,325::guestagent::430::virt.vm::(stop) >>>>>>>>>>>>>> vmId=`ed786811-0321-431e-be4b-2d03764c1b02`::Stopping >>>>>>>>>>>>>> connection >>>>>>>>>>>>>> Thread-70::DEBUG::2017-03-05 16:00:04,325::vmchannels::238::vds::(unregister) >>>>>>>>>>>>>> Delete fileno 52 from listener. >>>>>>>>>>>>>> Thread-70::DEBUG::2017-03-05 16:00:04,325::vmchannels::66::vds::(_unregister_fd) >>>>>>>>>>>>>> Failed to unregister FD from epoll (ENOENT): 52 >>>>>>>>>>>>>> Thread-70::DEBUG::2017-03-05 16:00:04,326::__init__::209::jsonrpc.Notification::(emit) >>>>>>>>>>>>>> Sending event {"params": {"ed786811-0321-431e-be4b-2d03764c1b02": >>>>>>>>>>>>>> {"status": "Down", "exitReason": 1, "exitMessage": "internal error: process >>>>>>>>>>>>>> exited while connecting to monitor: Could not access KVM kernel module: >>>>>>>>>>>>>> Permission denied\nfailed to initialize KVM: Permission denied", >>>>>>>>>>>>>> "exitCode": 1}, "notify_time": 4339924730}, "jsonrpc": "2.0", "method": >>>>>>>>>>>>>> "|virt|VM_status|ed786811-0321-431e-be4b-2d03764c1b02"} >>>>>>>>>>>>>> >>>>>>>>>>>>>> Can you check if you have KVM modules loaded? Also, check >>>>>>>>>>>>>> group owner for "/dev/kvm". >>>>>>>>>>>>>> Best Regards >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> On Sat, Mar 4, 2017 at 4:24 PM, Manuel Luis Aznar < >>>>>>>>>>>>>> manuel.luis.aznar(a)gmail.com&gt; wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>>> Hello there again, >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> The error on the first email was using the repo >>>>>>>>>>>>>>> ovirt-release41.rpm (http://resources.ovirt.org/pu >>>>>>>>>>>>>>> b/yum-repo/ovirt-release41.rpm), so as I were getting the >>>>>>>>>>>>>>> same error again and again I am currently trying with >>>>>>>>>>>>>>> ovirt-release41-snapshot.rpm (http://resources.ovirt.org/pu >>>>>>>>>>>>>>> b/yum-repo/ovirt-release41-snapshot.rpm) and the result is >>>>>>>>>>>>>>> nearly the same. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> After creating the VM on the installation I got the same >>>>>>>>>>>>>>> error with the command "systemctl status vdsmd": >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> mar 04 14:10:19 host1.bajada.es vdsm[20443]: vdsm root >>>>>>>>>>>>>>> ERROR failed to retrieve Hosted Engine HA info >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Traceback (most recent call last): >>>>>>>>>>>>>>> File "/usr/lib/python2.7/site-packages/vdsm/host/api.py", >>>>>>>>>>>>>>> line 231, in _getHaInfo >>>>>>>>>>>>>>> stats = instance.get_all_stats() >>>>>>>>>>>>>>> File "/usr/lib/python2.7/site-packa >>>>>>>>>>>>>>> ges/ovirt_hosted_engine_ha/client/client.py", line 102, in >>>>>>>>>>>>>>> get_all_stats >>>>>>>>>>>>>>> with broker.connection(self._retries, >>>>>>>>>>>>>>> self._wait): >>>>>>>>>>>>>>> File "/usr/lib64/python2.7/contextlib.py", line >>>>>>>>>>>>>>> 17, in __enter__ >>>>>>>>>>>>>>> return self.gen.next() >>>>>>>>>>>>>>> File "/usr/lib/python2.7/site-packa >>>>>>>>>>>>>>> ges/ovirt_hosted_engine_ha/lib/brokerlink.py", line 99, in >>>>>>>>>>>>>>> connection >>>>>>>>>>>>>>> self.connect(retries, wait) >>>>>>>>>>>>>>> File "/usr/lib/python2.7/site-packa >>>>>>>>>>>>>>> ges/ovirt_hosted_engine_ha/lib/brokerlink.py", line 78, in >>>>>>>>>>>>>>> connect >>>>>>>>>>>>>>> raise BrokerConnectionError(error_msg) >>>>>>>>>>>>>>> BrokerConnectionError: Failed to connect to >>>>>>>>>>>>>>> broker, the number of errors has exceeded the limit (1) >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> mar 04 14:10:34 host1.bajada.es vdsm[20443]: vdsm >>>>>>>>>>>>>>> ovirt_hosted_engine_ha.lib.brokerlink.BrokerLink ERROR >>>>>>>>>>>>>>> Failed to connect to broker, the number of errors has exceeded the limit (1) >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> I have noticed that the ovirt-ha-agent and ovirt-ha-broker >>>>>>>>>>>>>>> services was not running. I guess if this have something to do with the >>>>>>>>>>>>>>> error in vsmd service log. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> But in this case the ovirt-hosted-engine-installation >>>>>>>>>>>>>>> prints the vnc connection and I can connect to the engine VM. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Thanks for all in advance >>>>>>>>>>>>>>> Any help would be appreciated >>>>>>>>>>>>>>> Manuel Luis Aznar >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> 2017-03-03 21:48 GMT+00:00 Manuel Luis Aznar < >>>>>>>>>>>>>>> manuel.luis.aznar(a)gmail.com&gt;: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Hello there, >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> I am having some trouble when deploying an oVirt 4.1 >>>>>>>>>>>>>>>> hosted engine installation. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> When I m just to end the installation and the hosted >>>>>>>>>>>>>>>> engine setup script is about to start the Vm engine (appliance) it fails >>>>>>>>>>>>>>>> saying "The VM is not powring up". >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> If I double check the service vdsmd i get this error all >>>>>>>>>>>>>>>> the time: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> vdsm root ERROR failed to retrieve Hosted Engine HA info >>>>>>>>>>>>>>>> Traceback (most recent call last): >>>>>>>>>>>>>>>> File "/usr/lib/python2.7/site-packages/vdsm/host/api.py", >>>>>>>>>>>>>>>> line 231, in _getHaInfo >>>>>>>>>>>>>>>> stats = instance.get_all_stats() >>>>>>>>>>>>>>>> File "/usr/lib/python2.7/site-packa >>>>>>>>>>>>>>>> ges/ovirt_hosted_engine_ha/client/client.py", line 102, >>>>>>>>>>>>>>>> in get_all_stats >>>>>>>>>>>>>>>> with broker.connection(self._retries, >>>>>>>>>>>>>>>> self._wait): >>>>>>>>>>>>>>>> File "/usr/lib64/python2.7/contextlib.py", line 17, >>>>>>>>>>>>>>>> in __enter__ >>>>>>>>>>>>>>>> return self.gen.next() >>>>>>>>>>>>>>>> File "/usr/lib/python2.7/site-packa >>>>>>>>>>>>>>>> ges/ovirt_hosted_engine_ha/lib/brokerlink.py", line 99, >>>>>>>>>>>>>>>> in connection >>>>>>>>>>>>>>>> self.connect(retries, wait) >>>>>>>>>>>>>>>> File "/usr/lib/python2.7/site-packa >>>>>>>>>>>>>>>> ges/ovirt_hosted_engine_ha/lib/brokerlink.py", line 78, >>>>>>>>>>>>>>>> in connect >>>>>>>>>>>>>>>> raise BrokerConnectionError(error_msg) >>>>>>>>>>>>>>>> BrokerConnectionError: Failed to connect to broker, the >>>>>>>>>>>>>>>> number of errors has exceeded the limit (1) >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Did anyone have experimented the same problem?¿? Any hint >>>>>>>>>>>>>>>> on How to solved it?¿? I have tried several times with clean installations >>>>>>>>>>>>>>>> and always getting the same... >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> The host where I am trying to do the installation have >>>>>>>>>>>>>>>> CentOS 7... >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Thanks for all in advance >>>>>>>>>>>>>>>> Will be waiting for any hint to see what I am doing >>>>>>>>>>>>>>>> wrong... >>>>>>>>>>>>>>>> Manuel Luis Aznar >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>>>>> Users mailing list >>>>>>>>>>>>>>> Users(a)ovirt.org >>>>>>>>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> _______________________________________________ >>>>>>>>>>> Users mailing list >>>>>>>>>>> Users(a)ovirt.org >>>>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>> >>>>>> >>>>> >>>> >>> >> >