Let us know how it works out, I am curious to see if having a untagged and tagged interface on the same bridge was an issue. On Jun 30, 2015 10:21 PM, "Julián Tete" <danteconrad14@gmail.com> wrote:
Thanks Donny, Tomorrow I'm going to try this. :)
2015-06-30 21:12 GMT-05:00 Donny Davis <donny@cloudspin.me>:
That tells me that there is a tagging issue between the host and the switch. Untagged traffic flows without issue via the same interface as tagged traffic. As a personal best practice I separate access ports(untagged) and trunk ports (tagged) traffic on different physical ports. Can you setup a separate phys interface for the tagged traffic, or must you be able to pass both on the same interface. On Jun 30, 2015 10:05 PM, "Julián Tete" <danteconrad14@gmail.com> wrote:
My mgmt network works wonderfully, Virtual Machines created on the mgmt even can reach Internet. But my company wants the traffic separated.
Thanks Donny, I'm a RHCSA from Colombia, but I'm learning about oVirt. (oVirt is a new thing in my country)
P.S : I want to put VMware in the Trash Can too. ^_ ^
2015-06-30 20:59 GMT-05:00 Donny Davis <donny@cloudspin.me>:
There is a special place in my DC for vmware. TrashCan...lol On Jun 30, 2015 9:50 PM, "Julián Tete" <danteconrad14@gmail.com> wrote:
I'm going to check it out... but how the host can reach the Gateway and the Virtual Machine inside doesn't ?
Donny you are very kind, this the last step to free my DataCenter from VMware.
2015-06-30 20:46 GMT-05:00 Donny Davis <donny@cloudspin.me>:
Does your switch have an IP on that vlan... I would step things out VM>host>switch>rtr
You have already confirmed VM to host.
I'm going to look at your screens again to make sure I didn't miss anything On Jun 30, 2015 9:42 PM, "Julián Tete" <danteconrad14@gmail.com> wrote:
> Thanks for the explanation :) > > I set everything of the VLANs at oVirt, After I put a IP on the > Virtual Machine. But the Virtual Machine can't reach the gateway, The host > can do. The Virtual Machine only can reach the host. All the machines of > the range of net can reach the Virtual Machine. > > 2015-06-30 20:36 GMT-05:00 Donny Davis <donny@cloudspin.me>: > >> I'm asking if your setting the vlan on the VM or at ovirt. >> >> More than likely if you are coming from VMware you have the Vlans >> set at the hypervisor. This does work in ovirt, I am doing it right now >> On Jun 30, 2015 9:31 PM, "Julián Tete" <danteconrad14@gmail.com> >> wrote: >> >>> Mmmm I'm new in oVirt :( >>> >>> VMs Interface is Virtual MachineS Interface or VM Network >>> Interface in the host ? >>> >>> I configured the IP of the VLAN in the host. >>> >>> I double check: the NIC of the Host has the VLAN assigned. >>> >>> Can you help me ? >>> >>> 2015-06-30 20:11 GMT-05:00 Donny Davis <donny@cloudspin.me>: >>> >>>> Are you configuring the vms interface with the vlan or tagging at >>>> the host. >>>> On Jun 30, 2015 7:28 PM, "Julián Tete" <danteconrad14@gmail.com> >>>> wrote: >>>> >>>>> Hi Donny >>>>> >>>>> We have HP Switches (HP 5406zl) and they are configurated on >>>>> trunk mode. (VMware is configurated to use that). >>>>> >>>>> Any suggestion ? >>>>> >>>>> Thanks for your response. >>>>> >>>>> :) >>>>> >>>>> 2015-06-30 17:51 GMT-05:00 Donny Davis <donny@cloudspin.me>: >>>>> >>>>>> Vlans are layer 2, sounds like a tagging problem. Cisco >>>>>> switches? The tag sticks to the host bridge, but is being stripped off when >>>>>> it leaves the host.... Is your switch in access mode or trunk? >>>>>> Hi Friends of oVirt >>>>>> >>>>>> I'm trying to migrate my company from VMware to oVirt. >>>>>> In my final tests, I set up 2 more VLANs in oVirt, (VM VLANs) >>>>>> The Virtual Machines in these VLANs, can be reached from the >>>>>> external IPs from the net range, >>>>>> but from the Virtual machines only can ping the Host with the >>>>>> Bridge and itself, can't reach the gateway. ¿? >>>>>> >>>>>> I configured a IP Forwarding in the Host with the virtual >>>>>> machine, and nothing changes... >>>>>> >>>>>> Any idea ? This is the last duty before embrace oVirt in the >>>>>> company. >>>>>> >>>>>> Look to the VLAN 100 configuration (My desired VM Network): >>>>>> >>>>>> http://postimg.org/image/7hrog0a2n/ >>>>>> >>>>>> http://postimg.org/image/68b40i1vr/ >>>>>> >>>>>> http://postimg.org/image/lu6mlshgp/ >>>>>> >>>>>> http://postimg.org/image/540o1qc0t/ >>>>>> >>>>>> http://postimg.org/image/4kyg787bt/ >>>>>> >>>>>> http://postimg.org/image/v7ralh7zb/ >>>>>> >>>>>> http://postimg.org/image/kn903cl03/ >>>>>> >>>>>> For any idea, thanks in advance >>>>>> >>>>>> _______________________________________________ >>>>>> Users mailing list >>>>>> Users@ovirt.org >>>>>> http://lists.ovirt.org/mailman/listinfo/users >>>>>> >>>>>> >>>>> >>> >