--_3583c31f-d733-4257-a9f2-247411bf2db5_ Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Results of testing=2C round 3 (trying to get [Errno 16] Device or resource = busy '/etc/pki/vdsm/certs/cacert.pem' error.) Variable: no symlink to /etc/system-release =20 I started with a reinstall of ovirt-engine and ovirt-node-2.3.0 (formatted = drive=2C reinstalled)=2C enabled network (via logical network breth0 throug= h device eth0)=2C and set the Ovirt Engine Admin Password on the node.Creat= ed a new host in ovirt-manager=2C host went to "Pending Approval".On the ma= nager=2C clicked the host=2C clicked approve=2C and clicked ok (on power ma= nagement warning) And.... we passed the cert install! And everything worked up until I hit t= he cpuFlags issue. So... it wasn't the sym-link. Borked install? I guess the only think I did= different these times from before was I used a Fedora 16 disk to format th= e drive between each attempt=2C instead of using the ovirt-node disk and pe= rforming a reinstall=2C as well as rebuilding ovirt-manager. Not sure where this leaves this topic. Seems I can properly add a node now = without a cert or bridge renaming issue.- NickFrom: cybertimber2000@hotmail= .com To: dfediuck@redhat.com=3B mburns@redhat.com Date: Mon=2C 7 May 2012 18:53:39 -0400 CC: users@ovirt.org Subject: Re: [Users] Adding oVirt Node Fails Results of testing=2C round 2 (trying to get [Errno 16] Device or resource = busy '/etc/pki/vdsm/certs/cacert.pem' error.) =20 Again=2C I started with a reinstall of ovirt-engine and ovirt-node-2.3.0 (f= ormatted drive with F16 disk=2C reinstalled)=2C enabled network (logical = =3D breth0=2C device =3D eth0).=20 This time=2C I set the management server (by IP address and default port)= =2C with the [*] Connect to oVirt Engine and Validate Certificate set=2C an= d entered the oVirt Engine Admin Password.=20 Ovirt prompts to confirm fingerprint=2C accepted. (quickly a message about = pki and "persisted" appears on screen). Created a new host in ovirt-manager=2C host went to "Pending Approval". On the node shell=2C performed "ln -s /etc/system-release /etc/rhev-hypervi= sor-release" ((note: not sure this make an effect yet=2C I think it's the v= alidating certificate part=2C but did so that only ONE thing changed betwee= n first and second test.)) On the manager=2C clicked the host=2C clicked approve=2C and clicked ok (on= power management warning) Ended at missing cpuFlags. =20 So we are at the same point as before=2C which means my idea on what caused= it (validate certificate) didn't cause it. Now for testing without the sy= m-link that Doron suggested. =20 - Nick =20 From: cybertimber2000@hotmail.com To: dfediuck@redhat.com=3B mburns@redhat.com Date: Mon=2C 7 May 2012 18:32:34 -0400 CC: users@ovirt.org Subject: Re: [Users] Adding oVirt Node Fails Ok so here is the results of testing: I started with a reinstall of ovirt-engine and ovirt-node-2.3.0 (formatted = drive=2C reinstalled)=2C enabled network (via logical network breth0 throug= h device eth0)=2C and set the Ovirt Engine Admin Password on the node. Crea= ted a new host in ovirt-manager=2C host went to "Pending Approval". On the node shell=2C performed "ln -s /etc/system-release /etc/rhev-hypervi= sor-release" On the manager=2C clicked the host=2C clicked approve=2C and clicked ok (on= power management warning) Ended at missing cpuFlags. =20 SO: We are at the same point that I was at with the plain Fedora16 + VDSM i= nstall=2C which is good. No issue with failing to install the cert! =20 =20 But I think I know what has been causing the OSError: [Errno 16] Device or = resource busy '/etc/pki/vdsm/certs/cacert.pem' error. Working through that now=2C will post the step by step when I have it. - Nick > To: mburns@redhat.com=3B abaron@redhat.com=3B cybertimber2000@hot= mail.com
From: dfediuck@redhat.com CC: users@ovirt.org Date: Mon=2C 7 May 2012 17:28:20 -0400 Subject: Re: [Users] Adding oVirt Node Fails =20 Nicholas=2C The code I saw is testing for this file to verify it's a nods platform=2C and if it's missing the behaviour changes. So the code will try to unlink the file=2C which will give you this result in a mounted file. =20 Sent from my Android phone. Please ignore typos. =20 -----Original Message----- From: Nicholas Kesick [cybertimber2000@hotmail.com] Received: Tuesday=2C 08 May 2012=2C 0:08 To: mburns@redhat.com=2C abaron@redhat.com CC: oVirt Mailing List [users@ovirt.org] Subject: Re: [Users] Adding oVirt Node Fails =20 =20 Ayal=2C did you see something in the code that made you want me to try th= e sym-link to /etc/rhev-hypervisor-release?Mike=2C is there any harm in lin= king it? - Nick
=20 ----- Original Message -----
=20 =20
Date: Sat=2C 5 May 2012 12:29:20 +0300 From: dfediuck@redhat.com To: cybertimber2000@hotmail.com CC: mburns@redhat.com=3B users@ovirt.org Subject: Re: [Users] Adding oVirt Node Fails =20 On 04/05/12 02:49=2C Nicholas Kesick wrote:
Fri=2C 27 Apr 2012 05:22:24 DEBUG instCert: try to delete old certificates Fri=2C 27 Apr 2012 05:22:24 DEBUG instCert: failed. Traceback (most recent call last): File "/usr/share/vdsm-reg/deployUtil.py"=2C line 1133=2C in ins= tCert File "/usr/share/vdsm-reg/deployUtil.py"=2C line 1098=2C in pkiCleanup OSError: [Errno 16] Device or resource busy: '/etc/pki/vdsm/certs/cacert.pem' =20 =20 Nicholas=2C I think I got it=3B Please check if this file exists: '/etc/rhev-hypervisor-release'. If not=2C try to create a sym-link in this name to /etc/system-release=2C and restart vdsm-reg service. =20 No=2C /etc/rhev-hypervisor-release should not exist. It doesn't have t= o. We went through significant effort before the 3.0 release making sure
Subject: Re: [Users] Adding oVirt Node Fails From: mburns@redhat.com To: abaron@redhat.com CC: cybertimber2000@hotmail.com=3B users@ovirt.org Date: Sun=2C 6 May 2012 21:26:08 -0400 =20 On Sat=2C 2012-05-05 at 16:39 -0400=2C Ayal Baron wrote: that vdsm used /etc/ovirt-node-image-release for determining if the machine is ovirt-node based or not. =20 =20 There should not be any need for anything that says "rhev" in ovirt-node. =20 Mike =20
=20 Also please provide the rpm information for vdsm-reg and vdsm as well. -- =20 /d =20 "Common sense is not so common." --Voltaire=2C Dictionnaire Philosophique (1764) =20 Just to make sure I do it right=2C can you specify which you wanted done on the node=2C and which you wanted on the manager? I have the feeling you wanted it all done on the node. =20 you are correct=2C all on node. =20 =20 =20 =20
Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users =20
Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users =20 =20 =20 =20 Sent from my Android phone. Please ignore typos. =20
=3B<br>So we are at the same point as before=2C which means my idea o= n what caused it (validate certificate) didn't cause it. =3B Now for te= sting without the sym-link that Doron suggested.<br> =3B<br>- Nick<br>&= nbsp=3B<br><div><div id=3D"ecxSkyDrivePlaceholder"></div><hr id=3D"ecxstopS=
>=3B unlink the file=2C which will give<br>>=3B you this result in a m= ounted file.<br>>=3B <br>>=3B Sent from my Android phone. Please ignore= typos.<br>>=3B <br>>=3B -----Original Message-----<br>>=3B From: Nic= holas Kesick [cybertimber2000@hotmail.com]<br>>=3B Received: Tuesday=2C 0= 8 May 2012=2C 0:08<br>>=3B To: mburns@redhat.com=2C abaron@redhat.com<br>= >=3B CC: oVirt Mailing List [users@ovirt.org]<br>>=3B Subject: Re: [Use= rs] Adding oVirt Node Fails<br>>=3B <br>>=3B <br>>=3B Ayal=2C did you= see something in the code that made you want me to try the sym-link to /et= c/rhev-hypervisor-release?Mike=2C is there any harm in linking it? - Nick= <br>>=3B >=3B Subject: Re: [Users] Adding oVirt Node Fails<br>>=3B &= gt=3B From: mburns@redhat.com<br>>=3B >=3B To: abaron@redhat.com<br>>= =3B >=3B CC: cybertimber2000@hotmail.com=3B users@ovirt.org<br>>=3B >= =3B Date: Sun=2C 6 May 2012 21:26:08 -0400<br>>=3B >=3B <br>>=3B >= =3B On Sat=2C 2012-05-05 at 16:39 -0400=2C Ayal Baron wrote:<br>>=3B >= =3B >=3B <br>>=3B >=3B >=3B ----- Original Message -----<br>>=3B = >=3B >=3B >=3B <br>>=3B >=3B >=3B >=3B <br>>=3B >=3B >= =3B >=3B >=3B Date: Sat=2C 5 May 2012 12:29:20 +0300<br>>=3B >=3B &= gt=3B >=3B >=3B From: dfediuck@redhat.com<br>>=3B >=3B >=3B >= =3B >=3B To: cybertimber2000@hotmail.com<br>>=3B >=3B >=3B >=3B &= gt=3B CC: mburns@redhat.com=3B users@ovirt.org<br>>=3B >=3B >=3B >= =3B >=3B Subject: Re: [Users] Adding oVirt Node Fails<br>>=3B >=3B &g= t=3B >=3B >=3B <br>>=3B >=3B >=3B >=3B >=3B On 04/05/12 02:49= =2C Nicholas Kesick wrote:<br>>=3B >=3B >=3B >=3B >=3B >=3B Fri= =2C 27 Apr 2012 05:22:24 DEBUG instCert: try to delete old<br>>=3B >=3B= >=3B >=3B >=3B >=3B certificates<br>>=3B >=3B >=3B >=3B &g= t=3B >=3B Fri=2C 27 Apr 2012 05:22:24 DEBUG instCert: failed.<br>>=3B &= gt=3B >=3B >=3B >=3B >=3B Traceback (most recent call last):<br>>= =3B >=3B >=3B >=3B >=3B >=3B File "/usr/share/vdsm-reg/deployUtil= .py"=2C line 1133=2C in instCert<br>>=3B >=3B >=3B >=3B >=3B >= =3B File "/usr/share/vdsm-reg/deployUtil.py"=2C line 1098=2C in<br>>=3B &= gt=3B >=3B >=3B >=3B >=3B pkiCleanup<br>>=3B >=3B >=3B >=3B= >=3B >=3B OSError: [Errno 16] Device or resource busy:<br>>=3B >= =3B >=3B >=3B >=3B >=3B '/etc/pki/vdsm/certs/cacert.pem'<br>>=3B = >=3B >=3B >=3B >=3B <br>>=3B >=3B >=3B >=3B >=3B <br>>= =3B >=3B >=3B >=3B >=3B Nicholas=2C<br>>=3B >=3B >=3B >=3B = >=3B I think I got it=3B<br>>=3B >=3B >=3B >=3B >=3B Please che= ck if this file exists: '/etc/rhev-hypervisor-release'.<br>>=3B >=3B &g= t=3B >=3B >=3B If not=2C try to create a sym-link in this name to<br>&g= t=3B >=3B >=3B >=3B >=3B /etc/system-release=2C<br>>=3B >=3B &g= t=3B >=3B >=3B and restart vdsm-reg service.<br>>=3B >=3B <br>>= =3B >=3B No=2C /etc/rhev-hypervisor-release should not exist. It doesn't= have to.<br>>=3B >=3B We went through significant effort before the 3.= 0 release making sure<br>>=3B >=3B that vdsm used /etc/ovirt-node-image= -release for determining if the<br>>=3B >=3B machine is ovirt-node base= d or not. <br>>=3B >=3B <br>>=3B >=3B There should not be any need= for anything that says "rhev" in<br>>=3B >=3B ovirt-node.<br>>=3B &g= t=3B <br>>=3B >=3B Mike<br>>=3B >=3B <br>>=3B >=3B >=3B >= =3B >=3B <br>>=3B >=3B >=3B >=3B >=3B Also please provide the r=
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users =20 _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users = --_3583c31f-d733-4257-a9f2-247411bf2db5_ Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <html> <head> </head> <body class=3D'hmmessage'><div dir=3D'ltr'> <style><!-- .hmmessage P { margin:0px=3B padding:0px } body.hmmessage { font-size: 10pt=3B font-family:Tahoma } --></style> <div dir=3D"ltr">Results of testing=2C round 3 (trying to get [Errno 16] De= vice or resource busy '/etc/pki/vdsm/certs/cacert.pem' error.)<br>Variable:= no symlink to =3B/etc/system-release<br> =3B<br>I started with a r= einstall of ovirt-engine and ovirt-node-2.3.0 (formatted drive=2C reinstall= ed)=2C enabled network (via logical network breth0 through device eth0)=2C = and set the Ovirt Engine Admin Password on the node.</div><div dir=3D"ltr">= Created a new host in ovirt-manager=2C host went to "Pending Approval".</di= v><div dir=3D"ltr">On the manager=2C clicked the host=2C clicked approve=2C= and clicked ok (on power management warning)<br>And.... we passed the cert= install! =3B And everything worked up until I hit the cpuFlags issue.<= /div><div dir=3D"ltr"><br>So... it wasn't the sym-link. =3B Borked inst= all? I guess the only think I did different these times from before was I u= sed a Fedora 16 disk to format the drive between each attempt=2C instead of= using the ovirt-node disk and performing a reinstall=2C as well as rebuild= ing ovirt-manager.</div><div dir=3D"ltr"><br>Not sure where this leaves thi= s topic. Seems I can properly add a node now without a cert or bridge renam= ing issue.</div><div dir=3D"ltr">- Nick</div><div dir=3D"ltr"><div id=3D"Sk= yDrivePlaceholder"></div><hr id=3D"stopSpelling">From: cybertimber2000@hotm= ail.com<br>To: dfediuck@redhat.com=3B mburns@redhat.com<br>Date: Mon=2C 7 M= ay 2012 18:53:39 -0400<br>CC: users@ovirt.org<br>Subject: Re: [Users] Addin= g oVirt Node Fails<br><br> <style><!-- .ExternalClass .ecxhmmessage P {padding:0px=3B} .ExternalClass body.ecxhmmessage {font-size:10pt=3Bfont-family:Tahoma=3B} --></style> <div dir=3D"ltr"> Results of testing=2C round 2 (trying to get [Errno 16] Device or resource = busy '/etc/pki/vdsm/certs/cacert.pem' error.)<br> =3B<br>Again=2C I sta= rted with a reinstall of ovirt-engine and ovirt-node-2.3.0 (formatted drive= with F16 disk=2C reinstalled)=2C enabled network (logical =3D breth0=2C de= vice =3D eth0). =3B<br>This time=2C I set the management server (by IP = address =3Band default port)=2C with the [*] Connect to oVirt Engine an= d Validate Certificate set=2C and entered the oVirt Engine =3BAdmin Pas= sword. =3B<br>Ovirt prompts to confirm fingerprint=2C accepted. (quickl= y a message about pki and "persisted" appears on screen).<br>Created a new = host in ovirt-manager=2C host went to "Pending Approval".<br>On the node sh= ell=2C performed "ln -s /etc/system-release /etc/rhev-hypervisor-release" (= (note: not sure this make an effect yet=2C I think it's the validating cert= ificate part=2C but did so that only ONE thing changed between first and se= cond test.))<br>On the manager=2C clicked the host=2C clicked approve=2C an= d clicked ok (on power management warning)<br>Ended at missing cpuFlags.<br= pelling">From: cybertimber2000@hotmail.com<br>To: dfediuck@redhat.com=3B mb= urns@redhat.com<br>Date: Mon=2C 7 May 2012 18:32:34 -0400<br>CC: users@ovir= t.org<br>Subject: Re: [Users] Adding oVirt Node Fails<br><br> <style><!-- .ExternalClass .ecxhmmessage P {padding:0px=3B} .ExternalClass body.ecxhmmessage {font-size:10pt=3Bfont-family:Tahoma=3B} --></style> <div dir=3D"ltr"> Ok so here is the results of testing:<br>I started with a reinstall of ovir= t-engine and ovirt-node-2.3.0 (formatted drive=2C reinstalled)=2C enabled n= etwork (via logical network breth0 through device =3Beth0)=2C and set t= he Ovirt Engine Admin Password on the node. Created a new host in ovirt-man= ager=2C host went to "Pending Approval".<br>On the node shell=2C performed = "ln -s /etc/system-release /etc/rhev-hypervisor-release"<br>On the manager= =2C clicked the host=2C clicked approve=2C and clicked ok (on power managem= ent warning)<br>Ended at missing cpuFlags.<br> =3B<br>SO: We are at the= same point that I was at with the plain Fedora16 + VDSM install=2C which i= s good. No issue with failing to install the cert! =3B <br> =3B<br>= But I think I know what has been causing the OSError: [Errno 16] Device or = resource busy =3B'/etc/pki/vdsm/certs/cacert.pem' error.<br>Working thr= ough that now=2C will post the step by step when I have it.<br><div><div id= =3D"ecxSkyDrivePlaceholder"> =3B</div><div>- Nick</div><div> =3B</d= iv>>=3B To: mburns@redhat.com=3B abaron@redhat.com=3B cybertimber2000@hot= mail.com<br>>=3B From: dfediuck@redhat.com<br>>=3B CC: users@ovirt.org<= br>>=3B Date: Mon=2C 7 May 2012 17:28:20 -0400<br>>=3B Subject: Re: [Us= ers] Adding oVirt Node Fails<br>>=3B <br>>=3B Nicholas=2C<br>>=3B The= code I saw is testing for this file to verify it's a nods platform=2C<br>&= gt=3B and if it's missing the behaviour changes. So the code will try to<br= pm information for vdsm-reg and vdsm as<br>>=3B >=3B >=3B >=3B >= =3B well.<br>>=3B >=3B >=3B >=3B >=3B --<br>>=3B >=3B >=3B = >=3B >=3B <br>>=3B >=3B >=3B >=3B >=3B /d<br>>=3B >=3B &g= t=3B >=3B >=3B <br>>=3B >=3B >=3B >=3B >=3B "Common sense is = not so common." --Voltaire=2C Dictionnaire<br>>=3B >=3B >=3B >=3B &= gt=3B Philosophique (1764)<br>>=3B >=3B >=3B >=3B <br>>=3B >=3B= >=3B >=3B Just to make sure I do it right=2C can you specify which you= wanted<br>>=3B >=3B >=3B >=3B done on the node=2C and which you wa= nted on the manager? I have the<br>>=3B >=3B >=3B >=3B feeling you = wanted it all done on the node.<br>>=3B >=3B >=3B <br>>=3B >=3B &= gt=3B you are correct=2C all on node.<br>>=3B >=3B >=3B <br>>=3B &g= t=3B >=3B >=3B <br>>=3B >=3B >=3B >=3B <br>>=3B >=3B >=3B= >=3B <br>>=3B >=3B >=3B >=3B ___________________________________= ____________<br>>=3B >=3B >=3B >=3B Users mailing list<br>>=3B &g= t=3B >=3B >=3B Users@ovirt.org<br>>=3B >=3B >=3B >=3B http://li= sts.ovirt.org/mailman/listinfo/users<br>>=3B >=3B >=3B >=3B <br>>= =3B >=3B >=3B _______________________________________________<br>>=3B= >=3B >=3B Users mailing list<br>>=3B >=3B >=3B Users@ovirt.org<b= r>>=3B >=3B >=3B http://lists.ovirt.org/mailman/listinfo/users<br>>= =3B >=3B <br>>=3B >=3B <br>>=3B <br>>=3B <br>>=3B S= ent from my Android phone. Please ignore typos.<br></div> </div> <br>_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users</div> </div> <br>_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users</div> </div></body> </html>= --_3583c31f-d733-4257-a9f2-247411bf2db5_--