
You usually have to specify that the LUN has to be accessible to multiple systems (e.g. like a clustered filesystem would). It's not unusual for a system to default to allowing only one initiator to connect.
Hi, Am 02.10.2018 um 16:59 schrieb Christopher Cox: the problem is not that not multiple initiators are unable to connect (that runs well), but that I see the LUNs only on one of the two controller ports, as the storage decided that the Top Controller is currently the active one. I can login to the second controller, but that does not present any LUNs to any of my servers. Maybe I should have written active controller instead of active system. Regards Bernhard
On 10/02/2018 05:51 AM, Bernhard Dick wrote:
Hi,
I'm trying to achieve iSCSI multipathing with an Dell Compellent SC4020 array. As the Dell Array does not work as an ALUA system it displays available LUNs only on the currently active system (here is a good description that I found: https://niktips.wordpress.com/2016/05/16/dell-compellent-is-not-an-alua-stor... ). As a result I cannot add the currently non-active controller to an iSCSI-Bond (as it does not present the LUNs to oVirt) and so the path to the second controller will not be up. Is there any way to solve this?
Regards Bernhard