3:15 p.m.
On Fri, Sep 25, 2020 at 4:06 PM Sandro Bonazzola <sbonazzo(a)redhat.com>
wrote:
Il giorno ven 25 set 2020 alle ore 15:32 Gianluca Cecchi <
gianluca.cecchi(a)gmail.com> ha scritto:
>
>
> On Fri, Sep 25, 2020 at 1:57 PM Sandro Bonazzola <sbonazzo(a)redhat.com>
> wrote:
>
>> oVirt Node 4.4.2 is now generally available
>>
>> The oVirt project is pleased to announce the general availability of
>> oVirt Node 4.4.2 , as of September 25th, 2020.
>>
>> This release completes the oVirt 4.4.2 release published on September
>> 17th
>>
>
> Thanks fir the news!
>
> How to prevent hosts entering emergency mode after upgrade from oVirt
>> 4.4.1
>>
>> Due to Bug 1837864 <https://bugzilla.redhat.com/show_bug.cgi?id=1837864> -
>> Host enter emergency mode after upgrading to latest build
>>
>> If you have your root file system on a multipath device on your hosts
>> you should be aware that after upgrading from 4.4.1 to 4.4.2 you may get
>> your host entering emergency mode.
>>
>> In order to prevent this be sure to upgrade oVirt Engine first, then on
>> your hosts:
>>
>> 1.
>>
>> Remove the current lvm filter while still on 4.4.1, or in emergency
>> mode (if rebooted).
>> 2.
>>
>> Reboot.
>> 3.
>>
>> Upgrade to 4.4.2 (redeploy in case of already being on 4.4.2).
>> 4.
>>
>> Run vdsm-tool config-lvm-filter to confirm there is a new filter in
>> place.
>> 5.
>>
>> Only if not using oVirt Node:
>> - run "dracut --force --add multipath” to rebuild initramfs with the
>> correct filter configuration
>> 6.
>>
>> Reboot.
>>
>>
>>
> What if I'm currently in 4.4.0 and want to upgrade to 4.4.2? Do I have to
> follow the same steps as if I were in 4.4.1 or what?
> I would like to avoid going through 4.4.1 if possible.
>
I don't think we had someone testing 4.4.0 to 4.4.2 but above procedure
should work for the same case.
The problematic filter in /etc/lvm/lvm.conf looks like:
# grep '^filter = ' /etc/lvm/lvm.conf
filter = ["a|^/dev/mapper/mpatha2$|", "r|.*|"]
>
> Thanks,
> Gianluca
>
OK, so I tried on my single host HCI installed with ovirt-node-ng 4.4.0 and
gluster wizard and never update until now.
Updated self hosted engine to 4.4.2 without problems.
My host doesn't have any filter or global_filter set up in lvm.conf in
4.4.0.
So I update it:
[root@ovirt01 vdsm]# yum update
Last metadata expiration check: 0:01:38 ago on Sat 03 Oct 2020 01:09:51 PM
CEST.
Dependencies resolved.
====================================================================================================
Package Architecture Version
Repository Size
====================================================================================================
Installing:
ovirt-node-ng-image-update noarch 4.4.2-1.el8
ovirt-4.4 782 M
replacing ovirt-node-ng-image-update-placeholder.noarch 4.4.0-2.el8
Transaction Summary
====================================================================================================
Install 1 Package
Total download size: 782 M
Is this ok [y/N]: y
Downloading Packages:
ovirt-node-ng-image-update-4.4 27% [===== ] 6.0 MB/s | 145
MB 01:45 ETA
----------------------------------------------------------------------------------------------------
Total 5.3
MB/s | 782 MB 02:28
Running transaction check
Transaction check succeeded.
Running transaction test
Transaction test succeeded.
Running transaction
Preparing :
1/1
Running scriptlet: ovirt-node-ng-image-update-4.4.2-1.el8.noarch
1/2
Installing : ovirt-node-ng-image-update-4.4.2-1.el8.noarch
1/2
Running scriptlet: ovirt-node-ng-image-update-4.4.2-1.el8.noarch
1/2
Obsoleting :
ovirt-node-ng-image-update-placeholder-4.4.0-2.el8.noarch
2/2
Verifying : ovirt-node-ng-image-update-4.4.2-1.el8.noarch
1/2
Verifying :
ovirt-node-ng-image-update-placeholder-4.4.0-2.el8.noarch
2/2
Unpersisting: ovirt-node-ng-image-update-placeholder-4.4.0-2.el8.noarch.rpm
Installed:
ovirt-node-ng-image-update-4.4.2-1.el8.noarch
Complete!
[root@ovirt01 vdsm]# sync
[root@ovirt01 vdsm]#
I reboot and I'm proposed 4.4.2 by default with 4.4.0 available too.
But the default 4.4.2 goes into emergency mode and if I login, I see that
it indeed has a filter inside lvm.conf.
See the filter that the update has put in place...:
https://drive.google.com/file/d/1LNZ_9c6HJnL3dbuwd5PMjb7wIuWAPDrg/view?us...
During boot I see this getting blocked:
A start job is running for dev-disk-by\x2d-id .......
the same for apparently 3 disks ( I think the gluster volumes...)
https://drive.google.com/file/d/1Yg2g5FyugfUO54E0y2JfLiabbIYXr_7f/view?us...
And at emergency mode:
https://drive.google.com/file/d/1WNB0e54tw5AUTzaG_HRvrltN1-Zh_LTn/view?us...
if I login and then exit
Reloading system manager configuration
Starting default target
and then stumped there. After some minutes I get confirmation that I am in
emergency mode and give the password again and that I jocan only reboot or
see journal log
contents of output of "journalctl -xb" here:
https://drive.google.com/file/d/1AB1heOaNyWlVMF5bQ5C67sRKMw-rLkvh/view?us...
I verified that I can safely boot in 4.4.0 in case..
What to do now?
Thanks,
Gianluca