Re: [ovirt-users] oVirt power management issue

10 Dec 2014


      ----- Original Message -----
...
From: "Wout Peeters" <wout@unix-solutions.be>
To: "Eli Mesika" <emesika@redhat.com>
Cc: users@ovirt.org
Sent: Wednesday, December 10, 2014 2:53:33 PM
Subject: Re: [ovirt-users] oVirt power management issue
Hi Eli,
When we enter the following data into the webGUI and press Test:
Address => [ip-address]
User Name => apc
Password => [password]
Type => apc
SSH Port => 22
Slot => 1
Options => [empty]
Secure => [box checked]
It shows up in the vdsm.log as follows:
addr=[ip-address],port=,agent=apc,user=[user],passwd=XXXX,action=status,secure=False,options=,policy=None
The 'port=', 'secure=' and 'options=' fields seem to remain unchanged,
regardless of our input.
Hi
Which APC version is used ???
I am getting to the conclusion that I must debug that in order to get an idea what is going on ....
...
Kind Regards,
Wout
----- Oorspronkelijk bericht -----
Van: "Eli Mesika" <emesika@redhat.com>
Aan: "Wout Peeters" <wout@unix-solutions.be>
Cc: users@ovirt.org
Verzonden: Woensdag 10 december 2014 12:54:56
Onderwerp: Re: [ovirt-users] oVirt power management issue
----- Original Message -----
...
From: "Wout Peeters" <wout@unix-solutions.be>
To: "Eli Mesika" <emesika@redhat.com>
Cc: users@ovirt.org
Sent: Tuesday, December 9, 2014 2:59:41 PM
Subject: Re: [ovirt-users] oVirt power management issue
Hi Eli,
The compatibility version of the cluster in which the proxy host resides is
3.5 .
Hi
Looking again in your VDSM log is see this
fenceNode(addr=***.***.***.***,port=,agent=apc,user=apc,passwd=XXXX,action=status,secure=False,options=,policy=None)
But when you invoked it directly you had wrote :
fence_apc -a ***.***.***.*** -l apc -p ****** -o status -n 1 -x
So, this required a secured connection while you sent ,secure=False from UI
Can you please check that the "secure" checkbox is checked in the UI for this
PM agents and retry ?
...
Kind regards,
Wout
----- Oorspronkelijk bericht -----
Van: "Eli Mesika" <emesika@redhat.com>
Aan: "Wout Peeters" <wout@unix-solutions.be>
Cc: users@ovirt.org
Verzonden: Maandag 8 december 2014 22:06:23
Onderwerp: Re: [ovirt-users] oVirt power management issue
----- Original Message -----
...
From: "Wout Peeters" <wout@unix-solutions.be>
To: emesika@redhat.com
Cc: users@ovirt.org
Sent: Monday, December 8, 2014 12:01:10 PM
Subject: Fwd: [ovirt-users] oVirt power management issue
Hi Eli,
Thanks for the response. Attached are engine.log and vdsm.log from the
host
serving as a proxy. Our CPUs are Intel Nehalem-based. We encounter the
same
problem using apc_snmp. This is the output of the rpm-commands:
rpm -qa | grep vdsm
vdsm-yajsonrpc-4.16.7-1.gitdb83943.el7.noarch
vdsm-4.16.7-1.gitdb83943.el7.x86_64
vdsm-xmlrpc-4.16.7-1.gitdb83943.el7.noarch
vdsm-python-zombiereaper-4.16.7-1.gitdb83943.el7.noarch
vdsm-jsonrpc-4.16.7-1.gitdb83943.el7.noarch
vdsm-cli-4.16.7-1.gitdb83943.el7.noarch
vdsm-python-4.16.7-1.gitdb83943.el7.noarch
rpm -qa | grep fence-agents
fence-agents-hpblade-4.0.2-21.el7.x86_64
fence-agents-cisco-ucs-4.0.2-21.el7.x86_64
fence-agents-eaton-snmp-4.0.2-21.el7.x86_64
fence-agents-apc-4.0.2-21.el7.x86_64
fence-agents-rsb-4.0.2-21.el7.x86_64
fence-agents-ilo-mp-4.0.2-21.el7.x86_64
fence-agents-ifmib-4.0.2-21.el7.x86_64
fence-agents-cisco-mds-4.0.2-21.el7.x86_64
fence-agents-all-4.0.2-21.el7.x86_64
fence-agents-common-4.0.2-21.el7.x86_64
fence-agents-rhevm-4.0.2-21.el7.x86_64
fence-agents-eps-4.0.2-21.el7.x86_64
fence-agents-bladecenter-4.0.2-21.el7.x86_64
fence-agents-intelmodular-4.0.2-21.el7.x86_64
fence-agents-apc-snmp-4.0.2-21.el7.x86_64
fence-agents-ilo2-4.0.2-21.el7.x86_64
fence-agents-ipmilan-4.0.2-21.el7.x86_64
fence-agents-scsi-4.0.2-21.el7.x86_64
fence-agents-brocade-4.0.2-21.el7.x86_64
fence-agents-wti-4.0.2-21.el7.x86_64
fence-agents-kdump-4.0.2-21.el7.x86_64
fence-agents-ibmblade-4.0.2-21.el7.x86_64
fence-agents-ipdu-4.0.2-21.el7.x86_64
fence-agents-vmware-soap-4.0.2-21.el7.x86_64
fence-agents-drac5-4.0.2-21.el7.x86_64
Kind regards,
Wout
Have seen few resolved bugs on that , can you please let us know what is
the
cluster level version in which the proxy host resides ?
...
----- Oorspronkelijk bericht -----
Van: "Eli Mesika" <emesika@redhat.com>
Aan: "Wout Peeters" <wout@unix-solutions.be>
Cc: users@ovirt.org
Verzonden: Maandag 8 december 2014 00:17:13
Onderwerp: Re: [ovirt-users] oVirt power management issue
----- Original Message -----
...
From: "Eli Mesika" <emesika@redhat.com>
To: "Wout Peeters" <wout@unix-solutions.be>
Cc: users@ovirt.org
Sent: Monday, December 8, 2014 1:14:54 AM
Subject: Re: [ovirt-users] oVirt power management issue
----- Original Message -----
...
From: "Wout Peeters" <wout@unix-solutions.be>
To: users@ovirt.org
Sent: Friday, December 5, 2014 12:50:24 PM
Subject: [ovirt-users] oVirt power management issue
Hi,
We're trying to set up an oVirt configuration with an
oVirt-controller
(CentOS 6), iSCSI-storage (Dell MD3200i) and 3 vm-hosts (CentOS 7)
powered
by 2 APC PDUs. Testing the Power Management settings in the web GUI,
we
get
the following message: "Test Succeeded, unknown." The oVirt engine
log
outputs the following:
2014-12-05 11:23:00,872 INFO
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(ajp--127.0.0.1-8702-7) Correlation ID: null, Call Stack: null,
Custom
Event
ID: -1, Message: Host vm-02 from data center XXXX was chosen as a
proxy
to
execute Status command on Host vm-03.
2014-12-05 11:23:00,879 INFO
[org.ovirt.engine.core.bll.FenceExecutor]
(ajp--127.0.0.1-8702-7) Using Host vm-02 from data center XXXX as
proxy
to
execute Status command on Host
2014-12-05 11:23:00,904 INFO
[org.ovirt.engine.core.bll.FenceExecutor]
(ajp--127.0.0.1-8702-7) Executing <Status> Power Management command,
Proxy
Host:vm-02, Agent:apc, Target Host:, Management IP:***.***.***.***,
User:apc, Options:, Fencing policy:null
2014-12-05 11:23:00,930 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.FenceVdsVDSCommand]
(ajp--127.0.0.1-8702-7) START, FenceVdsVDSCommand(HostName = vm-02,
HostId
=
071554fc-eed2-4e8f-b6bc-041248d0eaa5, targetVdsId =
67c642ed-0a7a-4e3b-8dd6-32a36df4aea9, action = Status, ip =
***.***.***.***,
port = , type = apc, user = apc, password = ******, options = '',
policy
=
'null'), log id: 2803522
2014-12-05 11:23:01,137 WARN
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(ajp--127.0.0.1-8702-7) Correlation ID: null, Call Stack: null,
Custom
Event
ID: -1, Message: Power Management test failed for Host vm-03.Done
2014-12-05 11:23:01,138 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.FenceVdsVDSCommand]
(ajp--127.0.0.1-8702-7) FINISH, FenceVdsVDSCommand, return: Test
Succeeded,
unknown, log id: 2803522
2014-12-05 11:23:01,139 WARN
[org.ovirt.engine.core.bll.FenceExecutor]
(ajp--127.0.0.1-8702-7) Fencing operation failed with proxy host
071554fc-eed2-4e8f-b6bc-041248d0eaa5, trying another proxy...
2014-12-05 11:23:01,241 INFO
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(ajp--127.0.0.1-8702-7) Correlation ID: null, Call Stack: null,
Custom
Event
ID: -1, Message: Host vm-01 from data center XXXX was chosen as a
proxy
to
execute Status command on Host vm-03.
2014-12-05 11:23:01,244 INFO
[org.ovirt.engine.core.bll.FenceExecutor]
(ajp--127.0.0.1-8702-7) Using Host vm-01 from data center XXXX as
proxy
to
execute Status command on Host
2014-12-05 11:23:01,246 INFO
[org.ovirt.engine.core.bll.FenceExecutor]
(ajp--127.0.0.1-8702-7) Executing <Status> Power Management command,
Proxy
Host:vm-01, Agent:apc, Target Host:, Management IP:***.***.***.***,
User:apc, Options:, Fencing policy:null
2014-12-05 11:23:01,273 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.FenceVdsVDSCommand]
(ajp--127.0.0.1-8702-7) START, FenceVdsVDSCommand(HostName = vm-01,
HostId
=
c50eb9bf-5294-4d46-813d-7adfcb41d71d, targetVdsId =
67c642ed-0a7a-4e3b-8dd6-32a36df4aea9, action = Status, ip =
***.***.***.***,
port = , type = apc, user = apc, password = ******, options = '',
policy
=
'null'), log id: 2b00de15
2014-12-05 11:23:01,449 WARN
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(ajp--127.0.0.1-8702-7) Correlation ID: null, Call Stack: null,
Custom
Event
ID: -1, Message: Power Management test failed for Host vm-03.Done
2014-12-05 11:23:01,451 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.FenceVdsVDSCommand]
(ajp--127.0.0.1-8702-7) FINISH, FenceVdsVDSCommand, return: Test
Succeeded,
unknown, log id: 2b00de15
This is the vdsm.log output:
JsonRpc (StompReactor)::DEBUG::2014-12-05
11:34:05,065::stompReactor::98::Broker.StompAdapter::(handle_frame)
Handling
message <StompFrame command='SEND'>
JsonRpcServer::DEBUG::2014-12-05
11:34:05,067::__init__::504::jsonrpc.JsonRpcServer::(serve_requests)
Waiting
for request
Thread-24996::DEBUG::2014-12-05
11:34:05,069::API::1188::vds::(fenceNode)
fenceNode(addr=***.***.***.***,port=,agent=apc,user=apc,passwd=XXXX,action=status,secure=False,options=,policy=None)
Thread-24996::DEBUG::2014-12-05
11:34:05,069::utils::738::root::(execCmd)
/usr/sbin/fence_apc (cwd None)
Thread-24996::DEBUG::2014-12-05
11:34:05,131::utils::758::root::(execCmd)
FAILED: <err> = "Failed: You have to enter plug number or machine
identification\nPlease use '-h' for usage\n"; <rc> = 1
Thread-24996::DEBUG::2014-12-05 11:34:05,131::API::1143::vds::(fence)
rc
1
inp agent=fence_apc
ipaddr=***.***.***.***
login=apc
action=status
passwd=XXXX
out [] err ['Failed: You have to enter plug number or machine
identification', "Please use '-h' for usage"]
The 'port' and 'options' fields show up as empty, even if we enter
'22'
or
'port=22'. We did enter the slot number as well.
Entering the fence_apc command manually, we get:
fence_apc -a ***.***.***.*** -l apc -p ****** -o status -n 1 -x
Status: ON
Anyone have an idea what could be the problem?
Hi, first please attach a full engine log and vdsm.log on the machine
that
served as a proxy for this operation
Please also attach the result of the following on the machine that
served
as
a proxy for this operation
rpm -qa | grep vdsm
rpm -qa | grep fence-agents
Is that a PowerPC machine ???
also, please try to use the apc_snmp instead of apc and see if that
resolved
the problem
...
Thanks
Eli Mesika
...
Thanks for your time and kind regards,
Wout
_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users