Eduardo, there is one thing you should be aware of. The jbod disks aren't
all pooled together to create one large storage domain. I had to spread my
data domains over the devices such as a data domain on /dev/SDA and data2
on sdb etc not a big problem with only two disks per server but with ten it
could get ugly
On Thu, Sep 13, 2018, 4:52 AM Eduardo Mayoral, <emayoral(a)arsys.es> wrote:
Thanks for your answers!
Yes, my plan is a replica-3 too. The cluster will be bigger, though, 4 or
5 nodes with 10 disks each -> 40 to 50 bricks.
Again, thanks for your help.
--
Eduardo Mayoral.
On 12/09/18 20:54, Jayme wrote:
Should also note that I am using replica 3 configuration with no arbiter
for extra redundancy.
On Wed, Sep 12, 2018 at 3:53 PM Jayme <jaymef(a)gmail.com> wrote:
> I am running a three server oVirt hyperconverged setup with JBOD disks.
> Two 2TB SSDs in JBOD per server. The configuration is working very well
> for me so far.
>
>
>
> On Wed, Sep 12, 2018 at 2:36 PM Donny Davis <donny(a)fortnebula.com> wrote:
>
>> JBOD is on the drop down when you do the setup for the volumes
>>
>> On Wed, Sep 12, 2018, 1:50 AM Eduardo Mayoral <emayoral(a)arsys.es> wrote:
>>
>>> Hi!
>>>
>>> I am thinking about using some spare servers I have for a
>>> hyperconverged oVirt + gluster. Only problem with these servers is that
>>> the RAID card is not specially good, so I am considering using gluster
>>> in a JBOD configuration. JBOD is supported for recent versions of
>>> gluster, but I am not sure if this configuration is supported by oVirt,
>>> or if there are any special considerations I should take into account.
>>>
>>> Anyone running oVirt + gluster with JBOD who can comment on this?
>>>
>>> Thanks!
>>>
>>> --
>>>
>>> Eduardo Mayoral.
>>>
>>> _______________________________________________
>>> Users mailing list -- users(a)ovirt.org
>>> To unsubscribe send an email to users-leave(a)ovirt.org
>>> Privacy Statement:
https://www.ovirt.org/site/privacy-policy/
>>> oVirt Code of Conduct:
>>>
https://www.ovirt.org/community/about/community-guidelines/
>>> List Archives:
>>>
https://lists.ovirt.org/archives/list/users@ovirt.org/message/2DTIGZ5VOKG...
>>>
>> _______________________________________________
>> Users mailing list -- users(a)ovirt.org
>> To unsubscribe send an email to users-leave(a)ovirt.org
>> Privacy Statement:
https://www.ovirt.org/site/privacy-policy/
>> oVirt Code of Conduct:
>>
https://www.ovirt.org/community/about/community-guidelines/
>> List Archives:
>>
https://lists.ovirt.org/archives/list/users@ovirt.org/message/YGQUVKGP3S3...
>>
>