On Tue, Apr 2, 2019 at 8:14 PM Leo David <leoalex@gmail.com> wrote:
Just to loop in, i've forgot to hit "Reply all"
I have deleted everything in the engine gluster mount path, unmounted the engine gluster volume ( not deleted the volume ) , and started the wizard with "Use already configured storage". I have pointed to use this gluster volume, volume gets mounted under the correct path, but installation still fails:
[ INFO ] TASK [ovirt.hosted_engine_setup : Activate storage domain] [ ERROR ] Error: Fault reason is "Operation Failed". Fault detail is "[]". HTTP response code is 400. [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "Fault reason is \"Operation Failed\". Fault detail is \"[]\". HTTP response code is 400."}
And I guess we don't have the engine logs to look at this? Is there any way you can access the engine console to check?
On the node's vdsm.log I can continuously see: 2019-04-02 13:02:18,832+0100 INFO (jsonrpc/0) [jsonrpc.JsonRpcServer] RPC call Host.getStats succeeded in 0.03 seconds (__init__:312) 2019-04-02 13:02:19,906+0100 INFO (vmrecovery) [vdsm.api] START getConnectedStoragePoolsList(options=None) from=internal, task_id=769c3983-5160-44e4-b1d8-7ab4e41ddd34 (api:48) 2019-04-02 13:02:19,907+0100 INFO (vmrecovery) [vdsm.api] FINISH getConnectedStoragePoolsList return={'poollist': []} from=internal, task_id=769c3983-5160-44e4-b1d8-7ab4e41ddd34 (api:54) 2019-04-02 13:02:19,907+0100 INFO (vmrecovery) [vds] recovery: waiting for storage pool to go up (clientIF:709) 2019-04-02 13:02:21,737+0100 INFO (periodic/2) [vdsm.api] START repoStats(domains=()) from=internal, task_id=ba12fbc1-0170-41a2-82e6-8ccb05ae9e09 (api:48) 2019-04-02 13:02:21,738+0100 INFO (periodic/2) [vdsm.api] FINISH repoStats return={} from=internal, task_id=ba12fbc1-0170-41a2-82e6-8ccb05ae9e09 (api:54)
Any calls to "START connectStorageServer" in vdsm.log?
Should I perform an "engine-cleanup", delete lvms from Cockpit and start it all over ?
I doubt if that would resolve issue since you did clean up files from the mount.
Did anyone successfully used this particular iso image "ovirt-node-ng-installer-4.3.2-2019031908.el7.iso" for a single node installation ? Sorry, don't know.
Thank you ! Leo
On Tue, Apr 2, 2019 at 1:45 PM Sahina Bose <sabose@redhat.com> wrote:
Is it possible you have not cleared the gluster volume between installs?
What's the corresponding error in vdsm.log?
On Tue, Apr 2, 2019 at 4:07 PM Leo David <leoalex@gmail.com> wrote:
And there it is the last lines on the ansible_create_storage_domain log:
2019-04-02 10:53:49,139+0100 DEBUG var changed: host "localhost" var "otopi_storage_domain_details" type "<type 'dict'>" value: "{ "changed": false, "exception": "Traceback (most recent call last):\n File \"/tmp/ansible_ovirt_storage_domain_payload_6Jxg5v/__main__.py\", line 664, in main\n storage_domains_module.post_create_check(sd_id)\n File \"/tmp/ansible_ovirt_storage_domain_payload_6Jxg5v/__main__.py\", line 526, in post_create_check\n id=storage_domain.id,\n File \"/usr/lib64/python2.7/site-packages/ovirtsdk4/services.py\", line 3053, in add\n return self._internal_add(storage_domain, headers, query, wait)\n File \"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 232, in _internal_add\n return future.wait() if wait else future\n File \"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 55, in wait\n return self._code(response)\n File \"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 229, in callback\n self._check_fault(response)\n File \"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 132, in _check_fault\n self._raise_error(response, body)\n File \"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 118, in _raise_error\n raise error\nError: Fault reason is \"Operation Failed\". Fault detail is \"[]\". HTTP response code is 400.\n", "failed": true, "msg": "Fault reason is \"Operation Failed\". Fault detail is \"[]\". HTTP response code is 400." }" 2019-04-02 10:53:49,141+0100 DEBUG var changed: host "localhost" var "ansible_play_hosts" type "<type 'list'>" value: "[]" 2019-04-02 10:53:49,141+0100 DEBUG var changed: host "localhost" var "play_hosts" type "<type 'list'>" value: "[]" 2019-04-02 10:53:49,142+0100 DEBUG var changed: host "localhost" var "ansible_play_batch" type "<type 'list'>" value: "[]" 2019-04-02 10:53:49,142+0100 ERROR ansible failed {'status': 'FAILED', 'ansible_type': 'task', 'ansible_task': u'Activate storage domain', 'ansible_result': u'type: <type \'dict\'>\nstr: {\'_ansible_parsed\': True, u\'exception\': u\'Traceback (most recent call last):\\n File "/tmp/ansible_ovirt_storage_domain_payload_6Jxg5v/__main__.py", line 664, in main\\n storage_domains_module.post_create_check(sd_id)\\n File "/tmp/ansible_ovirt_storage_domain_payload_6Jxg5v/__main__.py", line 526', 'task_duration': 9, 'ansible_host': u'localhost', 'ansible_playbook': u'/usr/share/ovirt-hosted-engine-setup/ansible/trigger_role.yml'} 2019-04-02 10:53:49,143+0100 DEBUG ansible on_any args <ansible.executor.task_result.TaskResult object at 0x7f03fd025e50> kwargs ignore_errors:None 2019-04-02 10:53:49,148+0100 INFO ansible stats { "ansible_playbook": "/usr/share/ovirt-hosted-engine-setup/ansible/trigger_role.yml", "ansible_playbook_duration": "01:15 Minutes", "ansible_result": "type: <type 'dict'>\nstr: {u'localhost': {'unreachable': 0, 'skipped': 6, 'ok': 23, 'changed': 0, 'failures': 1}}", "ansible_type": "finish", "status": "FAILED" } 2019-04-02 10:53:49,149+0100 INFO SUMMARY: Duration Task Name -------- -------- [ < 1 sec ] Execute just a specific set of steps [ 00:02 ] Force facts gathering [ 00:02 ] Check local VM dir stat [ 00:02 ] Obtain SSO token using username/password credentials [ 00:02 ] Fetch host facts [ 00:01 ] Fetch cluster ID [ 00:02 ] Fetch cluster facts [ 00:02 ] Fetch Datacenter facts [ 00:01 ] Fetch Datacenter ID [ 00:01 ] Fetch Datacenter name [ 00:02 ] Add glusterfs storage domain [ 00:02 ] Get storage domain details [ 00:02 ] Find the appliance OVF [ 00:02 ] Parse OVF [ 00:02 ] Get required size [ FAILED ] Activate storage domain
Any ideea on how to escalate this issue ? It just does not make sense to not be able to install from scratch a fresh node...
Have a nice day !
Leo
On Tue, Apr 2, 2019 at 12:11 PM Gobinda Das <godas@redhat.com> wrote:
Hi Leo, Can you please paste "df -Th" and "gluster v status" out put ? Wanted to make sure engine mounted and volumes and bricks are up. What does vdsm log say?
On Tue, Apr 2, 2019 at 2:06 PM Leo David <leoalex@gmail.com> wrote:
Thank you very much ! I have just installed a new fresh node, and triggered the single instance hyperconverged setup. It seems it fails at the hosted engine final steps of deployment: INFO ] TASK [ovirt.hosted_engine_setup : Get required size] [ INFO ] ok: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Remove unsuitable storage domain] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Check storage domain free space] [ INFO ] skipping: [localhost] [ INFO ] TASK [ovirt.hosted_engine_setup : Activate storage domain] [ ERROR ] Error: Fault reason is "Operation Failed". Fault detail is "[Cannot attach Storage. There is no active Host in the Data Center.]". HTTP response code is 409. [ ERROR ] fatal: [localhost]: FAILED! => {"changed": false, "msg": "Fault reason is \"Operation Failed\". Fault detail is \"[Cannot attach Storage. There is no active Host in the Data Center.]\". HTTP response code is 409."} Also, the ovirt-hosted-engine-setup-ansible-create_storage_domain-201932112413-xkq6nb.log throws the following:
2019-04-02 09:25:40,420+0100 DEBUG var changed: host "localhost" var "otopi_storage_domain_details" type "<type 'dict'>" value: "{ "changed": false, "exception": "Traceback (most recent call last):\n File \"/tmp/ansible_ovirt_storage_domain_payload_87MSyY/__main__.py\", line 664, in main\n storage_domains_module.post_create_check(sd_id)\n File \"/tmp/ansible_ovirt_storage_domain_payload_87MSyY/__main__.py\", line 526, in post_create_check\n id=storage_domain.id,\n File \"/usr/lib64/python2.7/site-packages/ovirtsdk4/services.py\", line 3053, in add\n return self._internal_add(storage_domain, headers, query, wait)\n File \"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 232, in _internal_add\n return future.wait() if wait else future\n File \"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 55, in wait\n return self._code(response)\n File \"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 229, in callback\n self._check_fault(response)\n File \"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 132, in _check_fault\n self._raise_error(response, body)\n File \"/usr/lib64/python2.7/site-packages/ovirtsdk4/service.py\", line 118, in _raise_error\n raise error\nError: Fault reason is \"Operation Failed\". Fault detail is \"[Cannot attach Storage. There is no active Host in the Data Center.]\". HTTP response code is 409.\n", "failed": true, "msg": "Fault reason is \"Operation Failed\". Fault detail is \"[Cannot attach Storage. There is no active Host in the Data Center.]\". HTTP response code is 409." }"
I have used the ovirt-node-ng-installer-4.3.2-2019031908.el7.iso. So far, I am unable to deploy oVirt single node Hyperconverged... Any thoughts ?
On Mon, Apr 1, 2019 at 9:46 PM Simone Tiraboschi <stirabos@redhat.com> wrote:
On Mon, Apr 1, 2019 at 6:14 PM Leo David <leoalex@gmail.com> wrote: > > Thank you Simone. > I've decides to go for a new fresh install from iso, and i'll keep posted if any troubles arise. But I am still trying to understand what are the services that mount the lvms and volumes after configuration. There is nothing related in fstab, so I assume there are a couple of .mount files somewhere in the filesystem. > Im just trying to understand node's underneath workflow.
hosted-engine configuration is stored in /etc/ovirt-hosted-engine/hosted-engine.conf; ovirt-ha-broker will mount the hosted-engine storage domain according to that and so ovirt-ha-agent will be able to start the engine VM. Everything else is just in the engine DB.
> > > On Mon, Apr 1, 2019, 10:16 Simone Tiraboschi <stirabos@redhat.com> wrote: >> >> Hi, >> to understand what's failing I'd suggest to start attaching setup logs. >> >> On Sun, Mar 31, 2019 at 5:06 PM Leo David <leoalex@gmail.com> wrote: >>> >>> Hello Everyone, >>> Using 4.3.2 installation, and after running through HyperConverged Setup, at the last stage it fails. It seems that the previously created "engine" volume is not mounted under "/rhev" path, therefore the setup cannot finish the deployment. >>> Any ideea which are the services responsible of mounting the volumes on oVirt Node distribution ? I'm thinking that maybe this particularly one failed to start for some reason... >>> Thank you very much ! >>> >>> -- >>> Best regards, Leo David >>> _______________________________________________ >>> Users mailing list -- users@ovirt.org >>> To unsubscribe send an email to users-leave@ovirt.org >>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ >>> oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ >>> List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/PUXDAQHVNZWF4T...
-- Best regards, Leo David _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/NROCMKIFJDEIWD...
--
Thanks, Gobinda
-- Best regards, Leo David _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-leave@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/XDJNBS6EOXCMJK...
-- Best regards, Leo David