10:21 a.m.
Dear all,
I think I finally understood the issue, even if I don't know how to fix it.
Trying to install a new HE from a backup I get the error:
"The host has been set in non_operational status, please check engine
logs, more info can be found in the engine logs, fix accordingly and
re-deploy."
*The host, not the hosted engine*. This is more clear in another log:
Host <removed_for_privacy> is set to Non-Operational, it is missing the
following networks: 'iscsi_net,sgsi_iscsi,sgsi_priv,sgsi_vpn'
The fact is that those networks are present on the host:
# ip addr
<CUT>
26: sgsi_priv: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
state UP group default qlen 1000
link/ether 90:e2:ba:63:2e:bc brd ff:ff:ff:ff:ff:ff
inet6 fe80::92e2:baff:fe63:2ebc/64 scope link
28: sgsi_vpn: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
state UP group default qlen 1000
link/ether 90:e2:ba:63:2e:bc brd ff:ff:ff:ff:ff:ff
inet6 fe80::92e2:baff:fe63:2ebc/64 scope link
valid_lft forever preferred_lft forever
The other two are configured on ovirt but not configurable on bare metal
system, indeed if I issue "ip addr" on a production host I don't see
those nets at all: I am puzzled. The problem is definitely this one, can
anyone provide any suggestion on how to proceed?
Why is it complaining about sgsi_priv and sgsi_vpn that are not missing
at all?
Andrea
On 15/07/2020 08:33, Yedidyah Bar David wrote:
On Tue, Jul 14, 2020 at 6:04 PM Andrea Chierici
<andrea.chierici(a)cnaf.infn.it> wrote:
> Hi,
> thank you for your help.
>
>
> I think this is not a critical failure, and is not what failed the restore.
>
>>
>>
>> Recently I tried the 4.3.11 beta and 4.4.1 and the error now is different:
>>
>> [ INFO ] Upgrading CA\n[ ERROR ] Failed to execute stage 'Misc
configuration': (2, 'No such file or directory')\n[ INFO ] DNF Performing DNF
transaction rollback\n
>
> This is part of 'engine-setup' output, which 'hosted-engine' runs
inside the engine VM. If you can access the engine VM, you can try finding more
information in /var/log/ovirt-engine/setup/* there. Otherwise, the hosted-engine deploy
script might have managed to get a copy to
/var/log/ovirt-hosted-engine-setup/engine-logs*. Please check/share these. Thanks.
>
>
> Unfortunately the installation procedures when exiting, deletes the vm, hence I
can't log in.
Are you sure? Did you check with 'ps', searching qemu processes?
If it's still up, but still using a local IP address, you can find it
by searching the hosted-engine logs for 'local_vm_ip' and login there
from the host.
> Here are the ERROR messages I got on the logs copied on the host:
>
> engine.log:2020-07-08 15:05:04,178+02 ERROR
[org.ovirt.engine.core.bll.pm.FenceProxyLocator]
(EE-ManagedScheduledExecutorService-engineScheduledThreadPool-Thread-89) [45a7e7f3] Can
not run fence action on host '<erased_for_privacy>', no suitable proxy host
was found.
That's ok.
> server.log:2020-07-08 15:09:23,081+02 ERROR [org.jboss.resteasy.resteasy_jaxrs.i18n]
(default task-1) RESTEASY002010: Failed to execute: javax.ws.rs.WebApplicationException:
HTTP 404 Not Found
> server.log:2020-07-08 15:14:19,804+02 ERROR [org.jboss.resteasy.resteasy_jaxrs.i18n]
(default task-1) RESTEASY002010: Failed to execute: javax.ws.rs.WebApplicationException:
HTTP 404 Not Found
This probably indicates a problem, but I agree it's not very helpful.
> grep: setup: Is a directory
Right - so please search inside it.
Also please check the hosted-engine deploy logs themselves.
> Not very helpful.
>
>
>
>>
>> I simply can't figure out what file is missing.
>> If, as a test, I try to install the HE without restoring the backup, the
installation goes smoothly to the end, but at that point I can't restore the backup,
as far as I can understand.
>
> Another option is to do the restore manually. To find relevant information, search
the net for "enginevm_before_engine_setup".
>
>
> Later I will give it a try.
Good luck and best regards,
--
Andrea Chierici - INFN-CNAF
Viale Berti Pichat 6/2, 40127 BOLOGNA
Office Tel: +39 051 2095463
SkypeID ataruz
--