On Fri, Feb 22, 2019 at 2:21 PM Nicolas Ecarnot <nicolas@ecarnot.net> wrote:
Le 22/02/2019 à 12:13, Martin Perina a écrit :
Unfortunately using fence_ipmilan is not possible to display more debugging details, so as mentioned earlier could you please run ipmitool directly?
ipmitool vv -I lanplus -H c-hv05.prd.sdis38.fr -p 623 -U stonith -P <PASSWORD> -L ADMINISTRATOR chassis power status
Above should display more details ...
root@hv04:/etc# ipmitool -vv -I lanplus -H c-hv05.prd.sdis38.fr -p 623 -U stonith -P 'xxx' -L ADMINISTRATOR chassis power status
Sending IPMI command payload netfn : 0x06 command : 0x38 data : 0x8e 0x04
If I understand that correctly, this is a request to open session to IPMI. If you haven't received any response, then I'd check: 1. Do you have IPMI enabled? 2. Is it exposed on the relevant IP/port? 3. Isn't there any firewall blocking access the client to the IPMI interface?
Sending IPMI command payload netfn : 0x06 command : 0x38 data : 0x8e 0x04
Sending IPMI command payload netfn : 0x06 command : 0x38 data : 0x8e 0x04
Sending IPMI command payload netfn : 0x06 command : 0x38 data : 0x8e 0x04
Sending IPMI command payload netfn : 0x06 command : 0x38 data : 0x0e 0x04
Sending IPMI command payload netfn : 0x06 command : 0x38 data : 0x0e 0x04
Sending IPMI command payload netfn : 0x06 command : 0x38 data : 0x0e 0x04
Sending IPMI command payload netfn : 0x06 command : 0x38 data : 0x0e 0x04
Get Auth Capabilities error Error issuing Get Channel Authentication Capabilities request Error: Unable to establish IPMI v2 / RMCP+ session root@hv04:/etc#
-- Nicolas ECARNOT
-- Martin Perina Associate Manager, Software Engineering Red Hat Czech s.r.o.