Yep, that's exactly the same issue. Mine was a 16Gb Sandisk Cruiser. When I switched to a no-name older 4Gb stick, it worked fine. I set mine up exactly as you did as well, dd from a Mac. Mine booted the kernel just fine as well. I tried booting up setting the "rootpw=<hash>" as well, but that didn't work for me, so I was unable to collect any information from the "blkid" command. I tried it three times, and I know I was doing it correctly. Joey's comments below.. -Adam <Joey's comments> I did go back and take a look at mount_live and made sure it contains a specific patch to handle usb drives properly. If you can get back to a shell prompt. run blkid and capture the output. If it's way too much to type then just the usb drive output should be ok. <Link to shell prompt instructions> http://ovirt.org/wiki/Node_Troubleshooting#Boot_up_problems On 4/18/12 5:02 AM, "Jason Lawer" <akula@thegeekhood.net> wrote:
I think I just hit the exact same issue with a Sandisk Crusier Blade 4GB USB stick. I bought 4 of them to try and setup a test system (before we commit to real hardware) and at least 2 of them failed with both 2.2 and 2.3 ovirt isos being copied using dd from a mac.
I copied to a old 8gb "Strontium" USB stick I had lying around and worked without issue. So it appears to be an issue with the stick.
I can provide more specific information on the stick or such if that is useful.
It wouldn't surprise me if its due to the low cost nature of the stick (cost $5 AUD) but I am curious as it booted the kernel fine.
Jason On 18/04/2012, at 4:48 AM, Adam vonNieda wrote:
Turns out that there might be an issue with my thumb drive. I tried another, and it worked fine. Thanks very much for the responses folks!
-Adam
On 4/17/12 10:11 AM, "Joey Boggs" <jboggs@redhat.com> wrote:
On 04/17/2012 10:51 AM, Adam vonNieda wrote:
Thanks for the reply Joey. I saw that too, and thought maybe my USB thumb drive was set to read only, but it's not. This box doesn't have a DVD drive, I'll try a different USB drive, and if that doesn't work, I'll dig up an external DVD drive.
Thanks again,
-Adam
Adam vonNieda Adam@vonNieda.org
On Apr 17, 2012, at 9:07, Joey Boggs<jboggs@redhat.com> wrote:
On 04/17/2012 09:45 AM, Adam vonNieda wrote:
Hi folks,
Still hoping someone can give me a hand with this. I can't install overt-node 2.3.0 on a on a Dell C2100 server because it won't start the graphical interface. I booted up a standard F16 image this morning, and the graphical installer does start during that process. Logs are below.
Thanks very much,
-Adam
> /tmp/ovirt.log > ============== > > /sbin/restorecon set context > /var/cache/yum->unconfined_u:object_r:rpm_var_cache_t:s0 > failed:'Read-only > file system' > /sbin/restorecon reset /var/cache/yum context > > >unconfined_u:object_r:file_t:s0->unconfined_u:object_r:rpm_var_cache >_t > :s0 > /sbin/restorecon reset /etc/sysctl.conf context > > >system_u:object_r:etc_runtime_t:s0->system_u:object_r:system_conf_t: >s0 > /sbin/restorecon reset /boot-kdump context > system_u:object_r:boot_t:s0->system_u:object_r:default_t:s0 > 2012-04-16 09:36:26,827 - INFO - ovirt-config-installer - ::::live > device:::: > /dev/sdb > 2012-04-16 09:36:26,836 - DEBUG - ovirtfunctions - cat > /proc/mounts|grep > -q "none /live" > 2012-04-16 09:36:26,836 - DEBUG - ovirtfunctions - > 2012-04-16 09:36:26,915 - DEBUG - ovirtfunctions - umount /live > 2012-04-16 09:36:26,915 - DEBUG - ovirtfunctions - > 2012-04-16 09:36:27,455 - ERROR - ovirtfunctions - Failed to > mount_live() > > /var/log/ovirt.log > ================== > > Apr 16 09:35:53 Starting ovirt-early > oVirt Node Hypervisor release 2.3.0 (1.0.fc16) > Apr 16 09:35:53 Updating /etc/default/ovirt > Apr 16 09:35:54 Updating OVIRT_BOOTIF to '' > Apr 16 09:35:54 Updating OVIRT_INIT to '' > Apr 16 09:35:54 Updating OVIRT_UPGRADE to '' > Apr 16 09:35:54 Updating OVIRT_STANDALONE to '1' > Apr 16 09:35:54 Updating OVIRT_BOOTPARAMS to 'nomodeset > crashkernel=512M-2G:64M,2G-:128M elevator=deadline quiet rd_NO_LVM > rhgb > rd.luks=0 rd.md=0 rd.dm=0' > Apr 16 09:35:54 Updating OVIRT_RHN_TYPE to 'classic' > Apr 16 09:35:54 Updating OVIRT_INSTALL to '1' > Apr 16 09:35:54 Updating OVIRT_ISCSI_INSTALL to '1' > Apr 16 09:36:08 Setting temporary admin password: F8Ax67kfRPSAw > Apr 16 09:36:09 Setting temporary root password: F8Ax67kfRPSAw > Apr 16 09:36:09 Skip runtime mode configuration. > Apr 16 09:36:09 Completed ovirt-early > Apr 16 09:36:09 Starting ovirt-awake. > Apr 16 09:36:09 Node is operating in unmanaged mode. > Apr 16 09:36:09 Completed ovirt-awake: RETVAL=0 > Apr 16 09:36:09 Starting ovirt > Apr 16 09:36:09 Completed ovirt > Apr 16 09:36:10 Starting ovirt-post > Apr 16 09:36:20 Hardware virtualization detected > Volume group "HostVG" not found > Skipping volume group HostVG > Restarting network (via systemctl): [ OK ] > Apr 16 09:36:20 Starting ovirt-post > Apr 16 09:36:21 Hardware virtualization detected > Volume group "HostVG" not found > Skipping volume group HostVG > Restarting network (via systemctl): [ OK ] > Apr 16 09:36:22 Starting ovirt-cim > Apr 16 09:36:22 Completed ovirt-cim > WARNING: persistent config storage not available > > /var/log/vdsm/vdsm.log > ======================= > > MainThread::INFO::2012-04-16 09:36:21,828::vdsm::71::vds::(run) I >am > the > actual vdsm 4.9-0 > MainThread::DEBUG::2012-04-16 > > >09:36:23,873::resourceManager::376::ResourceManager::(registerNamesp >ac > e) > Registering namespace 'Storage' > MainThread::DEBUG::2012-04-16 > 09:36:23,874::threadPool::45::Misc.ThreadPool::(__init__) Enter - > numThreads: 10.0, waitTimeout: 3, maxTasks: 500.0 > MainThread::DEBUG::2012-04-16 > 09:36:23,918::multipath::85::Storage.Misc.excCmd::(isEnabled) > '/usr/bin/sudo -n /bin/cat /etc/multipath.conf' (cwd None) > MainThread::INFO::2012-04-16 09:36:25,000::vdsm::71::vds::(run) I >am > the > actual vdsm 4.9-0 > MainThread::DEBUG::2012-04-16 > > >09:36:25,199::resourceManager::376::ResourceManager::(registerNamesp >ac > e) > Registering namespace 'Storage' > MainThread::DEBUG::2012-04-16 > 09:36:25,200::threadPool::45::Misc.ThreadPool::(__init__) Enter - > numThreads: 10.0, waitTimeout: 3, maxTasks: 500.0 > MainThread::DEBUG::2012-04-16 > 09:36:25,231::multipath::85::Storage.Misc.excCmd::(isEnabled) > '/usr/bin/sudo -n /bin/cat /etc/multipath.conf' (cwd None) > MainThread::DEBUG::2012-04-16 > 09:36:25,243::multipath::85::Storage.Misc.excCmd::(isEnabled) > SUCCESS: > <err> = '';<rc> = 0 > MainThread::DEBUG::2012-04-16 > 09:36:25,244::multipath::109::Storage.Multipath::(isEnabled) > multipath > Defaulting to False > MainThread::DEBUG::2012-04-16 > 09:36:25,244::misc::487::Storage.Misc::(rotateFiles) dir: /etc, > prefixName: multipath.conf, versions: 5 > MainThread::DEBUG::2012-04-16 > 09:36:25,244::misc::508::Storage.Misc::(rotateFiles) versions >found: > [0] > MainThread::DEBUG::2012-04-16 > 09:36:25,244::multipath::118::Storage.Misc.excCmd::(setupMultipath) > '/usr/bin/sudo -n /bin/cp /etc/multipath.conf >/etc/multipath.conf.1' > (cwd > None) > MainThread::DEBUG::2012-04-16 > 09:36:25,255::multipath::118::Storage.Misc.excCmd::(setupMultipath) > FAILED:<err> = 'sudo: unable to mkdir /var/db/sudo/vdsm: >Read-only > file > system\nsudo: sorry, a password is required to run sudo\n';<rc> >= 1 > MainThread::DEBUG::2012-04-16 > 09:36:25,256::multipath::118::Storage.Misc.excCmd::(setupMultipath) > '/usr/bin/sudo -n /usr/sbin/persist /etc/multipath.conf.1' (cwd >None) > MainThread::DEBUG::2012-04-16 > 09:36:25,269::multipath::118::Storage.Misc.excCmd::(setupMultipath) > FAILED:<err> = 'sudo: unable to mkdir /var/db/sudo/vdsm: >Read-only > file > system\nsudo: sorry, a password is required to run sudo\n';<rc> >= 1 > MainThread::DEBUG::2012-04-16 > 09:36:25,270::multipath::123::Storage.Misc.excCmd::(setupMultipath) > '/usr/bin/sudo -n /bin/cp /tmp/tmpnPcvWi /etc/multipath.conf' (cwd > None) > MainThread::DEBUG::2012-04-16 > 09:36:25,283::multipath::123::Storage.Misc.excCmd::(setupMultipath) > SUCCESS:<err> = '';<rc> = 0 > MainThread::DEBUG::2012-04-16 > 09:36:25,283::multipath::128::Storage.Misc.excCmd::(setupMultipath) > '/usr/bin/sudo -n /usr/sbin/persist /etc/multipath.conf' (cwd None) > MainThread::DEBUG::2012-04-16 > 09:36:25,294::multipath::128::Storage.Misc.excCmd::(setupMultipath) > FAILED:<err> = 'sudo: unable to mkdir /var/db/sudo/vdsm: >Read-only > file > system\nsudo: sorry, a password is required to run sudo\n';<rc> >= 1 > MainThread::DEBUG::2012-04-16 > 09:36:25,295::multipath::131::Storage.Misc.excCmd::(setupMultipath) > '/usr/bin/sudo -n /sbin/multipath -F' (cwd None) > MainThread::DEBUG::2012-04-16 > 09:36:25,323::multipath::131::Storage.Misc.excCmd::(setupMultipath) > FAILED:<err> = '';<rc> = 1 > MainThread::DEBUG::2012-04-16 > 09:36:25,323::multipath::134::Storage.Misc.excCmd::(setupMultipath) > '/usr/bin/sudo -n /sbin/service multipathd restart' (cwd None) > MainThread::DEBUG::2012-04-16 > 09:36:26,397::multipath::134::Storage.Misc.excCmd::(setupMultipath) > SUCCESS:<err> = '';<rc> = 0 > MainThread::DEBUG::2012-04-16 > > >09:36:26,398::hsm::248::Storage.Misc.excCmd::(__validateLvmLockingTy >pe > ) > '/usr/bin/sudo -n /sbin/lvm dumpconfig global/locking_type' (cwd > None) > MainThread::DEBUG::2012-04-16 > > >09:36:26,443::hsm::248::Storage.Misc.excCmd::(__validateLvmLockingTy >pe > ) > SUCCESS:<err> = '';<rc> = 0 > MainThread::DEBUG::2012-04-16 > 09:36:26,445::lvm::319::OperationMutex::(_reloadpvs) Operation 'lvm > reload > operation' got the operation mutex > MainThread::DEBUG::2012-04-16 > 09:36:26,447::lvm::287::Storage.Misc.excCmd::(cmd) '/usr/bin/sudo >-n > /sbin/lvm pvs --config " devices { preferred_names = > [\\"^/dev/mapper/\\"] > ignore_suspended_devices=1 write_cache_state=0 > disable_after_error_count=3 > filter = [ \\"a%1SanDisk|3600605b00436bd80171b105c225377ce%\\", > \\"r%.*%\\" ] } global { locking_type=1 prioritise_write_locks=1 > wait_for_locks=1 } backup { retain_min = 50 retain_days = 0 } " > --noheadings --units b --nosuffix --separator | -o > > >uuid,name,size,vg_name,vg_uuid,pe_start,pe_count,pe_alloc_count,mda_ >co > unt, > d > ev_size' (cwd None) > MainThread::DEBUG::2012-04-16 > 09:36:26,811::lvm::287::Storage.Misc.excCmd::(cmd) SUCCESS:<err> >= > ''; > <rc> = 0 > MainThread::DEBUG::2012-04-16 > 09:36:26,811::lvm::342::OperationMutex::(_reloadpvs) Operation 'lvm > reload > operation' released the operation mutex > MainThread::DEBUG::2012-04-16 > 09:36:26,812::lvm::352::OperationMutex::(_reloadvgs) Operation 'lvm > reload > operation' got the operation mutex > MainThread::DEBUG::2012-04-16 > 09:36:26,812::lvm::287::Storage.Misc.excCmd::(cmd) '/usr/bin/sudo >-n > /sbin/lvm vgs --config " devices { preferred_names = > [\\"^/dev/mapper/\\"] > ignore_suspended_devices=1 write_cache_state=0 > disable_after_error_count=3 > filter = [ \\"a%1SanDisk|3600605b00436bd80171b105c225377ce%\\", > \\"r%.*%\\" ] } global { locking_type=1 prioritise_write_locks=1 > wait_for_locks=1 } backup { retain_min = 50 retain_days = 0 } " > --noheadings --units b --nosuffix --separator | -o > > >uuid,name,attr,size,free,extent_size,extent_count,free_count,tags,vg >_m > da_s > i > ze,vg_mda_free' (cwd None) > MainThread::INFO::2012-04-16 09:36:29,307::vdsm::71::vds::(run) I >am > the > actual vdsm 4.9-0 > MainThread::DEBUG::2012-04-16 > > >09:36:29,514::resourceManager::376::ResourceManager::(registerNamesp >ac > e) > Registering namespace 'Storage' > MainThread::DEBUG::2012-04-16 > 09:36:29,515::threadPool::45::Misc.ThreadPool::(__init__) Enter - > numThreads: 10.0, waitTimeout: 3, maxTasks: 500.0 > MainThread::DEBUG::2012-04-16 > 09:36:29,551::multipath::85::Storage.Misc.excCmd::(isEnabled) > '/usr/bin/sudo -n /bin/cat /etc/multipath.conf' (cwd None) > MainThread::DEBUG::2012-04-16 > 09:36:29,564::multipath::85::Storage.Misc.excCmd::(isEnabled) > SUCCESS: > <err> = '';<rc> = 0 > MainThread::DEBUG::2012-04-16 > 09:36:29,565::multipath::101::Storage.Multipath::(isEnabled) >Current > revision of multipath.conf detected, preserving > MainThread::DEBUG::2012-04-16 > > >09:36:29,565::hsm::248::Storage.Misc.excCmd::(__validateLvmLockingTy >pe > ) > '/usr/bin/sudo -n /sbin/lvm dumpconfig global/locking_type' (cwd > None) > MainThread::DEBUG::2012-04-16 > > >09:36:29,606::hsm::248::Storage.Misc.excCmd::(__validateLvmLockingTy >pe > ) > SUCCESS:<err> = '';<rc> = 0 > MainThread::DEBUG::2012-04-16 > 09:36:29,606::lvm::319::OperationMutex::(_reloadpvs) Operation 'lvm > reload > operation' got the operation mutex > MainThread::DEBUG::2012-04-16 > 09:36:29,608::lvm::287::Storage.Misc.excCmd::(cmd) '/usr/bin/sudo >-n > /sbin/lvm pvs --config " devices { preferred_names = > [\\"^/dev/mapper/\\"] > ignore_suspended_devices=1 write_cache_state=0 > disable_after_error_count=3 > filter = [ \\"a%1SanDisk|3600605b00436bd80171b105c225377ce%\\", > \\"r%.*%\\" ] } global { locking_type=1 prioritise_write_locks=1 > wait_for_locks=1 } backup { retain_min = 50 retain_days = 0 } " > --noheadings --units b --nosuffix --separator | -o > > >uuid,name,size,vg_name,vg_uuid,pe_start,pe_count,pe_alloc_count,mda_ >co > unt, > d > ev_size' (cwd None) > MainThread::DEBUG::2012-04-16 > 09:36:29,714::lvm::287::Storage.Misc.excCmd::(cmd) SUCCESS:<err> >= > ''; > <rc> = 0 > MainThread::DEBUG::2012-04-16 > 09:36:29,715::lvm::342::OperationMutex::(_reloadpvs) Operation 'lvm > reload > operation' released the operation mutex > MainThread::DEBUG::2012-04-16 > 09:36:29,716::lvm::352::OperationMutex::(_reloadvgs) Operation 'lvm > reload > operation' got the operation mutex > MainThread::DEBUG::2012-04-16 > 09:36:29,716::lvm::287::Storage.Misc.excCmd::(cmd) '/usr/bin/sudo >-n > /sbin/lvm vgs --config " devices { preferred_names = > [\\"^/dev/mapper/\\"] > ignore_suspended_devices=1 write_cache_state=0 > disable_after_error_count=3 > filter = [ \\"a%1SanDisk|3600605b00436bd80171b105c225377ce%\\", > \\"r%.*%\\" ] } global { locking_type=1 prioritise_write_locks=1 > wait_for_locks=1 } backup { retain_min = 50 retain_days = 0 } " > --noheadings --units b --nosuffix --separator | -o > > >uuid,name,attr,size,free,extent_size,extent_count,free_count,tags,vg >_m > da_s > i > ze,vg_mda_free' (cwd None) > MainThread::DEBUG::2012-04-16 > 09:36:29,813::lvm::287::Storage.Misc.excCmd::(cmd) SUCCESS:<err> >= > ' No > volume groups found\n';<rc> = 0 > MainThread::DEBUG::2012-04-16 > 09:36:29,814::lvm::379::OperationMutex::(_reloadvgs) Operation 'lvm > reload > operation' released the operation mutex > MainThread::DEBUG::2012-04-16 > 09:36:29,815::lvm::287::Storage.Misc.excCmd::(cmd) '/usr/bin/sudo >-n > /sbin/lvm lvs --config " devices { preferred_names = > [\\"^/dev/mapper/\\"] > ignore_suspended_devices=1 write_cache_state=0 > disable_after_error_count=3 > filter = [ \\"a%1SanDisk|3600605b00436bd80171b105c225377ce%\\", > \\"r%.*%\\" ] } global { locking_type=1 prioritise_write_locks=1 > wait_for_locks=1 } backup { retain_min = 50 retain_days = 0 } " > --noheadings --units b --nosuffix --separator | -o > uuid,name,vg_name,attr,size,seg_start_pe,devices,tags' (cwd None) > MainThread::DEBUG::2012-04-16 > 09:36:29,916::lvm::287::Storage.Misc.excCmd::(cmd) SUCCESS:<err> >= > ' No > volume groups found\n';<rc> = 0 > Thread-11::DEBUG::2012-04-16 > 09:36:29,917::misc::1017::SamplingMethod::(__call__) Trying to >enter > sampling method (storage.sdc.refreshStorage) > MainThread::INFO::2012-04-16 > 09:36:29,919::dispatcher::121::Storage.Dispatcher::(__init__) > Starting > StorageDispatcher... > Thread-11::DEBUG::2012-04-16 > 09:36:29,919::misc::1019::SamplingMethod::(__call__) Got in to > sampling > method > Thread-11::DEBUG::2012-04-16 > 09:36:29,921::misc::1017::SamplingMethod::(__call__) Trying to >enter > sampling method (storage.iscsi.rescan) > Thread-11::DEBUG::2012-04-16 > 09:36:29,921::misc::1019::SamplingMethod::(__call__) Got in to > sampling > method > Thread-11::DEBUG::2012-04-16 > 09:36:29,921::iscsi::389::Storage.Misc.excCmd::(rescan) > '/usr/bin/sudo -n > /sbin/iscsiadm -m session -R' (cwd None) > MainThread::DEBUG::2012-04-16 > 09:36:29,930::utils::595::Storage.Misc.excCmd::(execCmd) > '/usr/bin/pgrep > -xf ksmd' (cwd None) > MainThread::DEBUG::2012-04-16 > 09:36:30,108::utils::595::Storage.Misc.excCmd::(execCmd) > SUCCESS:<err> = > '';<rc> = 0 > Thread-11::DEBUG::2012-04-16 > 09:36:30,116::iscsi::389::Storage.Misc.excCmd::(rescan) >FAILED:<err> > = > 'iscsiadm: No session found.\n';<rc> = 21 > Thread-11::DEBUG::2012-04-16 > 09:36:30,116::misc::1027::SamplingMethod::(__call__) Returning last > result > Thread-11::DEBUG::2012-04-16 > 09:36:30,117::supervdsm::83::SuperVdsmProxy::(_killSupervdsm) Could > not > kill old Super Vdsm [Errno 2] No such file or directory: > '/var/run/vdsm/svdsm.pid' > Thread-11::DEBUG::2012-04-16 > 09:36:30,117::supervdsm::71::SuperVdsmProxy::(_launchSupervdsm) > Launching > Super Vdsm > Thread-11::DEBUG::2012-04-16 > >09:36:30,118::supervdsm::74::Storage.Misc.excCmd::(_launchSupervdsm) > '/usr/bin/sudo -n /usr/bin/python >/usr/share/vdsm/supervdsmServer.pyc > bd4b3ae7-3e51-4d6b-b681-d5f6cb5bae07 2945' (cwd None) > MainThread::DEBUG::2012-04-16 > 09:36:30,254::supervdsmServer::170::SuperVdsm.Server::(main) Making > sure > I'm root > MainThread::DEBUG::2012-04-16 > 09:36:30,255::supervdsmServer::174::SuperVdsm.Server::(main) >Parsing > cmd > args > MainThread::DEBUG::2012-04-16 > 09:36:30,255::supervdsmServer::177::SuperVdsm.Server::(main) > Creating PID > file > MainThread::DEBUG::2012-04-16 > 09:36:30,255::supervdsmServer::181::SuperVdsm.Server::(main) > Cleaning old > socket > MainThread::DEBUG::2012-04-16 > 09:36:30,255::supervdsmServer::185::SuperVdsm.Server::(main) >Setting > up > keep alive thread > MainThread::DEBUG::2012-04-16 > 09:36:30,256::supervdsmServer::190::SuperVdsm.Server::(main) >Creating > remote object manager > MainThread::DEBUG::2012-04-16 > 09:36:30,256::supervdsmServer::201::SuperVdsm.Server::(main) >Started > serving super vdsm object > Thread-11::DEBUG::2012-04-16 > 09:36:32,124::supervdsm::92::SuperVdsmProxy::(_connect) Trying to > connect > to Super Vdsm > Thread-11::DEBUG::2012-04-16 > 09:36:32,133::supervdsm::64::SuperVdsmProxy::(__init__) Connected >to > Super > Vdsm > Thread-11::DEBUG::2012-04-16 > 09:36:34,070::multipath::71::Storage.Misc.excCmd::(rescan) > '/usr/bin/sudo > -n /sbin/multipath' (cwd None) > Thread-11::DEBUG::2012-04-16 > 09:36:34,130::multipath::71::Storage.Misc.excCmd::(rescan) > SUCCESS:<err> > = '';<rc> = 0 > Thread-11::DEBUG::2012-04-16 > 09:36:34,131::lvm::460::OperationMutex::(_invalidateAllPvs) > Operation 'lvm > invalidate operation' got the operation mutex > Thread-11::DEBUG::2012-04-16 > 09:36:34,131::lvm::462::OperationMutex::(_invalidateAllPvs) > Operation 'lvm > invalidate operation' released the operation mutex > Thread-11::DEBUG::2012-04-16 > 09:36:34,132::lvm::472::OperationMutex::(_invalidateAllVgs) > Operation 'lvm > invalidate operation' got the operation mutex > Thread-11::DEBUG::2012-04-16 > 09:36:34,132::lvm::474::OperationMutex::(_invalidateAllVgs) > Operation 'lvm > invalidate operation' released the operation mutex > Thread-11::DEBUG::2012-04-16 > 09:36:34,133::lvm::493::OperationMutex::(_invalidateAllLvs) > Operation 'lvm > invalidate operation' got the operation mutex > Thread-11::DEBUG::2012-04-16 > 09:36:34,133::lvm::495::OperationMutex::(_invalidateAllLvs) > Operation 'lvm > invalidate operation' released the operation mutex > Thread-11::DEBUG::2012-04-16 > 09:36:34,133::misc::1027::SamplingMethod::(__call__) Returning last > result > Thread-11::DEBUG::2012-04-16 > 09:36:34,133::hsm::272::Storage.HSM::(__cleanStorageRepository) > Started > cleaning storage repository at '/rhev/data-center' > Thread-11::DEBUG::2012-04-16 > 09:36:34,136::hsm::304::Storage.HSM::(__cleanStorageRepository) >White > list: ['/rhev/data-center/hsm-tasks', > '/rhev/data-center/hsm-tasks/*', > '/rhev/data-center/mnt'] > Thread-11::DEBUG::2012-04-16 > 09:36:34,136::hsm::305::Storage.HSM::(__cleanStorageRepository) >Mount > list: ['/rhev/data-center'] > Thread-11::DEBUG::2012-04-16 > 09:36:34,136::hsm::307::Storage.HSM::(__cleanStorageRepository) > Cleaning > leftovers > Thread-11::DEBUG::2012-04-16 > 09:36:34,136::hsm::350::Storage.HSM::(__cleanStorageRepository) > Finished > cleaning storage repository at '/rhev/data-center' > > > > > > > > > > On 4/16/12 8:38 AM, "Mike Burns"<mburns@redhat.com> wrote: > >> On Mon, 2012-04-16 at 08:14 -0500, Adam vonNieda wrote: >>> Hi folks, >>> >>> >>> I'm trying to install oVirt node v2.3.0 on A Dell C2100 >>> server. I >>> can boot up just fine, but the two menu options I see are "Start >>> oVirt >>> node", and "Troubleshooting". When I choose "Start oVirt node", >>>it >>> does just that, and I am soon after given a console login prompt. >>> I've >>> checked the docs, and I don't see what I'm supposed to do next, >>>as >>> in >>> a password etc. Am I missing something? >> Hi Adam, >> >> Something is breaking in the boot process. You should be getting >>a >> TUI >> screen that will let you configure and install ovirt-node. >> >> I just added an entry on the Node Troublesooting wiki page[1] for >> you to >> follow. >> >> Mike >> >> [1] http://ovirt.org/wiki/Node_Troubleshooting#Boot_up_problems >> >> >>> Thanks, >>> >>> >>> -Adam >>> _______________________________________________ >>> Users mailing list >>> Users@ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users This is definitely the cause of the installer failing
2012-04-16 09:36:26,836 - DEBUG - ovirtfunctions - cat /proc/mounts|grep -q "none /live" 2012-04-16 09:36:27,455 - ERROR - ovirtfunctions - Failed to mount_live()
What kind of media are you installing from: usb/cd/remote console?
Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
I did go back and take a look at mount_live and made sure it contains a specific patch to handle usb drives properly. If you can get back to a shell prompt. run blkid and capture the output. If it's way too much to type then just the usb drive output should be ok.
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users