3:02 a.m.
What version of CentOS 8 are you using -> Stream or regular, version ?
Best Regards,
Strahil Nikolov
На 16 юли 2020 г. 21:07:57 GMT+03:00, "Dominique Deschênes"
<dominique.deschenes(a)gcgenicom.com> написа:
>
>
>HI,
>Thank you for your answers
>
>I tried to replace the "package" with "dnf". the installation of
the
>gluster seems to work well but I had the similar message during the
>deployment of the Hosted engine.
>
>Here is the error
>
>[ ERROR ] fatal: [localhost]: FAILED! => {"attempts": 10,
"changed":
>false, "msg": "The Python 2 yum module is needed for this module. If
>you require Python 3 support use the `dnf` Ansible module instead."}
>
>
>
>
>
>Dominique Deschênes
>Ingénieur chargé de projets, Responsable TI
>816, boulevard Guimond, Longueuil J4G 1T5
> 450 670-8383 x105 450 670-2259
>
>
>
>
>----- Message reçu -----
>De: clam2718(a)gmail.com
>Date: 16/07/20 13:40
>À: users(a)ovirt.org
>Objet: [ovirt-users] Re: oVirt Node 4.4.1.1 Cockpit Hyperconverged
>Gluster deploy fails insufficient free space no matter how small the
>volume is set
>
>Dear Strahil, Dominique and Edward:
>
>I reimaged the three hosts with
>ovirt-node-ng-installer-4.4.1-2020071311.el8.iso just to be sure
>everything was stock (I had upgraded from v4.4) and attempted a
>redeploy with all suggested changes EXCEPT replacing "package" with
>"dnf" --> same failure. I then made Strahil's recommended
replacement
>of "package" with "dnf" and the Gluster deployment succeeded
through
>that section of main.yml only to fail a little later at:
>
>- name: Install python-yaml package for Debian systems
> package:
> name: python-yaml
> state: present
> when: ansible_distribution == "Debian" or ansible_distribution ==
>"Ubuntu"
>
>I found this notable given that I had not replaced "package" with
"dnf"
>in the prior section:
>
>- name: Change to Install lvm tools for debian systems.
> package:
> name: thin-provisioning-tools
> state: present
> when: ansible_distribution == "Debian" or ansible_distribution ==
>"Ubuntu"
>
>and deployment had not failed here. Anyhow, I deleted the two Debian
>statements as I am deploying from Node (CentOS based), cleaned up,
>cleaned up my drives ('dmsetup remove eui.xxx...' and 'wipefs --all
>--force /dev/nvme0n1 /dev/nvmeXn1 ...') and redeployed again. This
>time Gluster deployment seemed to execute main.yml OK only to fail in a
>new file, vdo_create.yml:
>
>TASK [gluster.infra/roles/backend_setup : Install VDO dependencies]
>************
>task path:
>/etc/ansible/roles/gluster.infra/roles/backend_setup/tasks/vdo_create.yml:26
>fatal: [fmov1n1.sn.dtcorp.com]: FAILED! => {"changed": false,
"msg":
>"The Python 2 yum module is needed for this module. If you require
>Python 3 support use the `dnf` Ansible module instead."}
>fatal: [fmov1n3.sn.dtcorp.com]: FAILED! => {"changed": false,
"msg":
>"The Python 2 yum module is needed for this module. If you require
>Python 3 support use the `dnf` Ansible module instead."}
>fatal: [fmov1n2.sn.dtcorp.com]: FAILED! => {"changed": false,
"msg":
>"The Python 2 yum module is needed for this module. If you require
>Python 3 support use the `dnf` Ansible module instead."}
>
>Expecting that this might continue, I have been looking into the
>documentation of how "package" works and if I can find a root cause for
>this rather than reviewing n *.yml files and replacing "package" with
>"dnf" in all of them. Thank you VERY much to Strahil for helping me!
>
>If Strahil or anyone else has any additional troubleshooting tips,
>suggestions, insight or solutions I am all ears. I will continue to
>update as I progress.
>
>Respectfully,
>Charles
>_______________________________________________
>Users mailing list -- users(a)ovirt.org
>To unsubscribe send an email to users-leave(a)ovirt.org
>Privacy Statement: https://www.ovirt.org/privacy-policy.html
>oVirt Code of Conduct:
>https://www.ovirt.org/community/about/community-guidelines/
>List Archives:
>https://lists.ovirt.org/archives/list/users@ovirt.org/message/3JTZX2OF4JTGRECMZLZXZQT5IWR4PFSG/