Re: [ovirt-users] Update to 3.5.1 scrambled multipath.conf?

----- Original Message ----- > From: "Dan Kenigsberg" <danken(a)redhat.com&gt; > To: "Gianluca Cecchi" <gianluca.cecchi(a)gmail.com&gt;, nsoffer(a)redhat.com > Cc: "users" <users(a)ovirt.org&gt;, ykaplan(a)redhat.com > Sent: Monday, January 26, 2015 2:09:23 PM > Subject: Re: [ovirt-users] Update to 3.5.1 scrambled multipath.conf? > > On Sat, Jan 24, 2015 at 12:59:01AM +0100, Gianluca Cecchi wrote: > > Hello, > > on my all-in-one installation @home I had 3.5.0 with F20. > > Today I updated to 3.5.1. > > > > it seems it modified /etc/multipath.conf preventing me from using my > > second > > disk at all... > > > > My system has internal ssd disk (sda) for OS and one local storage domain > > and another disk (sdb) with some partitions (on one of them there is also > > another local storage domain). > > > > At reboot I was put in emergency boot because partitions at sdb disk > > could > > not be mounted (they were busy). > > it took me some time to understand that the problem was due to sdb gone > > managed as multipath device and so busy for partitions to be mounted. > > > > Here you can find how multipath became after update and reboot > > https://drive.google.com/file/d/0BwoPbcrMv8mvS0FkMnNyMTdVTms/view?usp=sha... > > > > No device-mapper-multipath update in yum.log > > > > Also it seems that after changing it, it was then reverted at boot again > > (I > > don't know if the responsible was initrd/dracut or vdsmd) so in the mean > > time the only thing I could do was to make the file immutable with > > > > chattr +i /etc/multipath.conf > > The "supported" method of achieving this is to place "# RHEV PRIVATE" in > the second line of your hand-modified multipath.conf > > I do not understand why this has happened only after upgrade to 3.5.1 - > 3.5.0's should have reverted you multipath.conf just as well during each > vdsm startup. > > The good thing is that this annoying behavior has been dropped from the > master branch, so that 3.6 is not going to have it. Vdsm is not to mess > with other services config file while it is running. The logic moved to > `vdsm-tool configure` > > > > > and so I was able to reboot and verify that my partitions on sdb were ok > > and I was able to mount them (for safe I also ran an fsck against them) > > > > Update ran around 19:20 and finished at 19:34 > > here the log in gzip format > > https://drive.google.com/file/d/0BwoPbcrMv8mvWjJDTXU1YjRWOFk/view?usp=sha... > > > > Reboot was done around 21:10-21:14 > > > > Here my /var/log/messages in gzip format, where you can see latest days. > > https://drive.google.com/file/d/0BwoPbcrMv8mvMm1ldXljd3hZWnM/view?usp=sha... > > > > > > Any suggestion appreciated. > > > > Current multipath.conf (where I also commented out the getuid_callout > > that > > is not used anymore): > > > > [root@tekkaman setup]# cat /etc/multipath.conf > > # RHEV REVISION 1.1 > > > > blacklist { > > devnode "^(sda|sdb)[0-9]*" > > } I think what happened is: 1. 3.5.1 had new multipath version 2. So vdsm upgraded the local file 3. blacklist above was removed (it should exists in /etc/multipath.bak) To prevent local changes, you have to mark the file as private as Dan suggests. Seems to be related to the find_multiapth = "yes" bug: https://bugzilla.redhat.com/show_bug.cgi?id=1173290

Ben, can you confirm that this is the same issue? > > > > defaults { > > polling_interval 5 > > #getuid_callout "/usr/lib/udev/scsi_id --whitelisted > > --replace-whitespace --device=/dev/%n" > > no_path_retry fail > > user_friendly_names no > > flush_on_last_del yes > > fast_io_fail_tmo 5 > > dev_loss_tmo 30 > > max_fds 4096 > > } > Regards, Nir _______________________________________________ Users mailing list Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users