Hi,
Thanks for bringing the issue to our attention and for answering the
questions.
There is a patch to fix this:
After applying the patch a restart to the hosted engine vm is required (not
just the engine).
Let me know if you are still experiencing issues with this.
Thanks,
Jenny
On Wed, Apr 12, 2017 at 8:05 PM, Rafał Wojciechowski <
it(a)rafalwojciechowski.pl> wrote:
hi,
I will answer also. however I am using single hypervisor so without ha and
I have no performed steps:
https://www.ovirt.org/documentation/how-to/hosted-engine/
1. yes - however I have to start in headless mode so it is quite obvius
if I am trying to start with spice/vnc console I am getting segfault from
libvirtd
2. as above
3. as above
W dniu 12.04.2017 o 14:12, Arsène Gschwind pisze:
Hi all,
I will answer your questions:
1. definitively yes
2. the command hosted-engine --console works well and I'm able to connect.
3. Here are the device entries
devices={device:qxl,alias:video0,type:video,deviceId:
5210a3c3-9cc4-4aed-90c6-432dd2d37c46,address:{slot:0x02,
bus:0x00,domain:0x0000,type:pci,function:0x0}}
devices={device:console,type:console}
Thanks and rgds,
Arsène
On 04/12/2017 10:53 AM, Evgenia Tokar wrote:
Hi all,
I have managed to reproduce this issue and opened a bug for tracking it:
https://bugzilla.redhat.com/show_bug.cgi?id=1441570 .
There is no solution yet, but I would appreciate if any who encountered
this issue will answer some questions:
1. Is the console button greyed out in the UI?
2. On the hosted engine host, does the command hosted-engine --console
fails?
If it fails, try upgrading ovirt-hosted-engine-ha on the hosted
engine host. We had a bug related to this issue that was fixed (
https://bugzilla.redhat.com/show_bug.cgi?id=1364132).
After upgrade and restart of the vm, this should work, and you should
be able to connect to the console.
3. On the hosted engine host look at the content of:
/var/run/ovirt-hosted-engine-ha/vm.conf
Does it contain a graphical device? Or a console device?
Thanks,
Jenny
On Mon, Apr 10, 2017 at 11:44 AM, Martin Sivak <msivak(a)redhat.com> wrote:
> Hi,
>
> we are working on that, we can only ask for patience now, Jenny was
> trying to find out what happened and how to fix it all week.
>
> Best regards
>
> --
> Martin Sivak
> SLA / oVirt
>
> On Mon, Apr 10, 2017 at 9:38 AM, Rafał Wojciechowski <
> it(a)rafalwojciechowski.pl> wrote:
>
>> hi,
>>
>> I have similiar issue(I also started my mailthread) after upgrade 4.0 to
>> 4.1
>>
>> Version 4.1.1.8-1.el7.centos (before it was some 4.1.0.x or similiar -
>> update not fixed it)
>> to run VM I have to set in Console tab Headless mode - without it I got
>> libvirtd segfault(logs attached in my mailthread).
>>
>> So I am able to run VMs only without Console - do you also have to set
>> headless before run VM?
>>
>> I noticed that libvirt-daemon was also upgraded to 2.0 version during
>> ovirt upgrade - I dont think that 4.1 was not testes due to such libvirtd
>> upgrade... but maybe?
>>
>> Regards,
>> Rafal Wojciechowski
>>
>> W dniu 10.04.2017 o 08:24, Arsène Gschwind pisze:
>>
>> Hi,
>>
>> After updating to oVirt 4.1.1 Async release i can confirm that the
>> problem still persists.
>>
>> Rgds,
>> Arsène
>>
>> On 03/25/2017 12:25 PM, Arsène Gschwind wrote:
>>
>> Hi,
>> After updating to 4.1.1 i'm observing the same behavior, HE without any
>> console.
>> Even when trying to edit the HE VMs it doesn't change anything, Graphics
>> stays to NONE.
>>
>> Thanks for any Help.
>>
>> Regards,
>> Arsène
>>
>> On 03/24/2017 03:11 PM, Nelson Lameiras wrote:
>>
>> Hello,
>>
>> When upgrading my test setup from 4.0 to 4.1, my engine vm lost it's
>> console (from SPICE to None in GUI)
>>
>> My test setup :
>> 2 manually built hosts using centos 7.3, ovirt 4.1
>> 1 manually built hosted engine centos 7.3, oVirt 4.1.0.4-el7, accessible
>> with SPICE console via GUI
>>
>> I updated ovirt-engine from 4.1.0 to 4.1.1 by doing on engine :
>> - yum update
>> - engine-setup
>> - reboot engine
>>
>> When accessing 4.1.1 GUI, Graphics is set to "None" on "Virtual
>> Machines" page, with "console button" greyed out (all other VMs
have the
>> same Graphics set to the same value as before)
>> I tried to edit engine VM settings, and console options are same as
>> before (SPLICE, QXL).
>>
>> I'm hopping this is not a new feature, since if we loose network on
>> engine, console is the only way to debug...
>>
>> Is this a bug?
>>
>> ps. I was able to reproduce this bug 2 times
>>
>> cordialement, regards,
>>
>> <
https://www.lyra-network.com/>
>> Nelson LAMEIRAS
>> Ingénieur Systèmes et Réseaux / Systems and Networks engineer
>> Tel: +33 5 32 09 09 70
>> nelson.lameiras(a)lyra-network.com
>>
www.lyra-network.com |
www.payzen.eu <
https://payzen.eu>
>> <
https://www.youtube.com/channel/UCrVl1CO_Jlu3KbiRH-tQ_vA>
>> <
https://www.linkedin.com/company/lyra-network_2>
>> <
https://twitter.com/LyraNetwork>
>> <
https://payzen.eu>
>> ------------------------------
>> Lyra Network, 109 rue de l'innovation, 31670 Labège, FRANCE
>>
>>
>>
>> _______________________________________________
>> Users mailing listUsers@ovirt.orghttp://lists.ovirt.org/mailman/listinfo/users
>>
>> --
>>
>> *Arsène Gschwind* Fa. Sapify AG im Auftrag der Universität Basel IT
>> Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41
>> 79 449 25 63 <+41%2079%20449%2025%2063> |
http://its.unibas.ch
ITS-ServiceDesk:
>> support-its(a)unibas.ch | +41 61 267 14 11 <+41%2061%20267%2014%2011>
>>
>> _______________________________________________
>> Users mailing listUsers@ovirt.orghttp://lists.ovirt.org/mailman/listinfo/users
>>
>> --
>>
>> *Arsène Gschwind* Fa. Sapify AG im Auftrag der Universität Basel IT
>> Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41
>> 79 449 25 63 <+41%2079%20449%2025%2063> |
http://its.unibas.ch
ITS-ServiceDesk:
>> support-its(a)unibas.ch | +41 61 267 14 11 <+41%2061%20267%2014%2011>
>>
>> _______________________________________________
>> Users mailing listUsers@ovirt.orghttp://lists.ovirt.org/mailman/listinfo/users
>>
>> _______________________________________________ Users mailing list
>> Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
>
> --
*Arsène Gschwind* Fa. Sapify AG im Auftrag der Universität Basel IT
Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland Tel. +41 79
449 25 63 <+41%2079%20449%2025%2063> |
http://its.unibas.ch ITS-ServiceDesk:
support-its(a)unibas.ch | +41 61 267 14 11 <+41%2061%20267%2014%2011>