This is a multi-part message in MIME format.
--------------2BC3D62F5D60034060583AEA
Content-Transfer-Encoding: 8bit
Content-Type: text/plain; charset=utf-8; format=flowed
Hi Lev.
I am create new virtual host, and run ping from internet.
Ping results 70% packet loss.
But, if i am running ping from virtual host to somebody host in the
internet and at the same time, i am pinging this virtual host from internet.
then ping results 0% packet loss or 10% packet loss.
28.05.2017 13:34, Lev Veyde пишет:
Hi Alex,
That is quite strange...
Does this happen on both hosts - have you tried to migrate the VM to
the second host and see if the issue still remains?
Thanks in advance,
On Fri, May 26, 2017 at 3:02 PM, Герасимов Александр
<gerasimov.ay(a)eksmo.ru <mailto:gerasimov.ay@eksmo.ru>> wrote:
Hi Lev.
On one of the VMs you only see 1 NIC instead of the 2?
NO. both VM's sees two NIC, but on first VM ping with no error,
and second VM ping with 75% error.
OS version on hosts [root@node01 ~]# cat /etc/redhat-release
CentOS Linux release 7.3.1611 (Core)
OS veriosion on VM's [root@node03 ~]# cat /etc/redhat-release
CentOS Linux release 7.3.1611 (Core)
*first VM*
00:03.0 Ethernet controller: Red Hat, Inc Virtio network device
00:09.0 Ethernet controller: Red Hat, Inc Virtio network device
[root@node03 ~]# ip l
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state
UNKNOWN mode DEFAULT qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
pfifo_fast state UP mode DEFAULT qlen 1000
link/ether 00:1a:4a:16:01:51 brd ff:ff:ff:ff:ff:ff
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
pfifo_fast state UP mode DEFAULT qlen 1000
link/ether 00:1a:4a:16:01:55 brd ff:ff:ff:ff:ff:ff
*second VM*
00:03.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8100/8101L/8139 PCI Fast Ethernet Adapter (rev 20) - but i
tested all version of NIC and no effect
00:0a.0 Ethernet controller: Red Hat, Inc Virtio network device
[root@node04 ~]# ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state
UNKNOWN mode DEFAULT qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
pfifo_fast state UP mode DEFAULT qlen 1000
link/ether 00:1a:4a:16:01:53 brd ff:ff:ff:ff:ff:ff
3: ens3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
pfifo_fast state UP mode DEFAULT qlen 1000
link/ether 00:1a:4a:16:01:52 brd ff:ff:ff:ff:ff:ff
In logs no messages only like this :
May 26 15:01:01 node04 systemd: Started Session 67263 of user root.
May 26 15:01:01 node04 systemd: Starting Session 67263 of user root.
May 26 15:01:01 node04 systemd: Created slice user-600.slice.
May 26 15:01:01 node04 systemd: Starting user-600.slice.
May 26 15:01:01 node04 systemd: Started Session 67262 of user bitrix.
May 26 15:01:01 node04 systemd: Starting Session 67262 of user bitrix.
May 26 15:01:01 node04 systemd: Removed slice user-600.slice.
May 26 15:01:01 node04 systemd: Stopping user-600.slice.
Hi Alexander,
So if I understand it correctly, you have the following configuration:
- 2 hosts, each having 2 NICs
- 2 virtual machines, each have a connection to each one of the NICs
available on the hosts
On one of the VMs you only see 1 NIC instead of the 2?
Are you sure that the VM is properly configured to have 2 NICs?
What Linux distro and version you're using on the hosts and inside
the VMs ?
Can you please send us:
- the logs from the VM, e.g. /var/log/messages
- the output of lspci -v
- the output of ip link
Thanks in advance,
2017-05-18 12:19 GMT+03:00 Герасимов Александр <gerasimov.ay at
eksmo.ru <
http://eksmo.ru>>:
> Hi all.
>
> I have to servers with ovirt.
>
> And to identical virtual machines.
>
> Both servers are identical. But on second virtual server not
working one
> network interface. Ping have a problem. I tried to change
network driver,
> but has no effect.
>
> I don't understand that to do
>
>
> ovirt version and package:
>
> rpm -qa|grep ovirt
>
ovirt-imageio-proxy-0.4.0-0.201608310602.gita9b573b.el7.centos.noarch
> ovirt-engine-vmconsole-proxy-helper-4.0.5.5-1.el7.centos.noarch
> ovirt-engine-restapi-4.0.5.5-1.el7.centos.noarch
> ovirt-engine-extensions-api-impl-4.0.5.5-1.el7.centos.noarch
> ovirt-imageio-daemon-0.4.0-1.el7.noarch
> ovirt-engine-wildfly-10.1.0-1.el7.x86_64
> ovirt-vmconsole-1.0.4-1.el7.centos.noarch
> ovirt-engine-cli-3.6.9.2-1.el7.noarch
> ovirt-engine-websocket-proxy-4.0.5.5-1.el7.centos.noarch
> ovirt-engine-dashboard-1.0.5-1.el7.centos.noarch
> ovirt-host-deploy-1.5.3-1.el7.centos.noarch
> ovirt-engine-wildfly-overlay-10.0.0-1.el7.noarch
> ovirt-engine-setup-base-4.0.5.5-1.el7.centos.noarch
> ovirt-engine-dwh-setup-4.0.5-1.el7.centos.noarch
>
ovirt-engine-setup-plugin-websocket-proxy-4.0.5.5-1.el7.centos.noarch
> ovirt-engine-setup-4.0.5.5-1.el7.centos.noarch
> ovirt-engine-dbscripts-4.0.5.5-1.el7.centos.noarch
> ovirt-engine-userportal-4.0.5.5-1.el7.centos.noarch
> ovirt-imageio-common-0.4.0-1.el7.noarch
> python-ovirt-engine-sdk4-4.0.2-1.el7.centos.x86_64
> ovirt-vmconsole-host-1.0.4-1.el7.centos.noarch
> ovirt-engine-dwh-4.0.5-1.el7.centos.noarch
> ovirt-engine-tools-backup-4.0.5.5-1.el7.centos.noarch
> ovirt-image-uploader-4.0.1-1.el7.centos.noarch
> ovirt-engine-setup-plugin-ovirt-engine-4.0.5.5-1.el7.centos.noarch
> ovirt-engine-tools-4.0.5.5-1.el7.centos.noarch
> ovirt-engine-4.0.5.5-1.el7.centos.noarch
> ovirt-release40-4.0.5-2.noarch
> ovirt-host-deploy-java-1.5.3-1.el7.centos.noarch
>
ovirt-engine-setup-plugin-ovirt-engine-common-4.0.5.5-1.el7.centos.noarch
> ovirt-iso-uploader-4.0.2-1.el7.centos.noarch
> ovirt-engine-webadmin-portal-4.0.5.5-1.el7.centos.noarch
> ovirt-setup-lib-1.0.2-1.el7.centos.noarch
> ovirt-engine-sdk-python-3.6.9.1-1.el7.centos.noarch
> ovirt-engine-lib-4.0.5.5-1.el7.centos.noarch
> ovirt-imageio-proxy-setup-0.4.0-0.201608310602.gita9b573b.
> el7.centos.noarch
> ovirt-engine-setup-plugin-vmconsole-proxy-helper-4.0.5.
> 5-1.el7.centos.noarch
> ovirt-engine-backend-4.0.5.5-1.el7.centos.noarch
> ovirt-engine-extension-aaa-jdbc-1.1.1-1.el7.noarch
> ovirt-vmconsole-proxy-1.0.4-1.el7.centos.noarch
>
>
--
С уважением, базисный админстратор
Гераcимов Александр
тел.+7(495)4116886 <tel:+7%20495%20411-68-86> доб. 5367
_______________________________________________
Users mailing list
Users(a)ovirt.org <mailto:Users@ovirt.org>
http://lists.ovirt.org/mailman/listinfo/users
<
http://lists.ovirt.org/mailman/listinfo/users>
--
Lev Veyde
Software Engineer, RHCE | RHCVA | MCITP
Red Hat Israel
<
https://www.redhat.com>
lev(a)redhat.com <mailto:lev@redhat.com> | lveyde(a)redhat.com
<mailto:lveyde@redhat.com>
<
https://red.ht/sig>
TRIED. TESTED. TRUSTED. <
https://redhat.com/trusted>
--
С уважением, базисный админстратор
Гераcимов Александр
тел. +7(495)4116886 доб. 5367
--------------2BC3D62F5D60034060583AEA
Content-Transfer-Encoding: 8bit
Content-Type: text/html; charset=utf-8
<html>
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=utf-8">
</head>
<body text="#000000" bgcolor="#FFFFFF">
Hi Lev.<br>
<br>
I am create new virtual host, and run ping from internet.<br>
<br>
Ping results 70% packet loss.<br>
<br>
But, if i am running ping from virtual host to somebody host in the
internet and at the same time, i am pinging this virtual host from
internet.<br>
<br>
then ping results 0% packet loss or 10% packet loss. <br>
<br>
<br>
<div class="moz-cite-prefix">28.05.2017 13:34, Lev Veyde
пишет:<br>
</div>
<blockquote type="cite"
cite="mid:CANB6pM5zZaEKG61JRsxc0VMfcqgHQKBS58WA5VpkqKG+u5RyuA@mail.gmail.com">
<div dir="ltr">
<div>
<div>Hi Alex,<br>
<br>
</div>
<div>That is quite strange...<br>
</div>
<div><br>
</div>
Does this happen on both hosts - have you tried to migrate the
VM to the second host and see if the issue still remains?<br>
</div>
<br>
<div>
<div>Thanks in advance,<br>
</div>
<div><br>
</div>
<div>
<div class="gmail_extra"><br>
<div class="gmail_quote">On Fri, May 26, 2017 at 3:02 PM,
Герасимов Александр <span dir="ltr"><<a
href="mailto:gerasimov.ay@eksmo.ru"
target="_blank"
moz-do-not-send="true">gerasimov.ay(a)eksmo.ru</a>&gt;</span>
wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex">
<div text="#000000" bgcolor="#FFFFFF">
<p><font face="Times New Roman">Hi
Lev.</font></p>
<span class="">
<p><br>
<font face="Times New Roman">On one of the VMs
you only see 1 NIC instead of the 2?</font></p>
</span>
<p><font face="Times New Roman">NO. both
VM's sees
two NIC, but on first VM ping with no error, and
second VM ping with 75% error.<br>
</font></p>
<p><font face="Times New Roman">OS version on
hosts
[root@node01 ~]# cat /etc/redhat-release <br>
CentOS Linux release 7.3.1611 (Core)</font></p>
<p><font face="Times New Roman">OS veriosion on
VM's
[root@node03 ~]# cat /etc/redhat-release <br>
CentOS Linux release 7.3.1611 (Core)<br>
</font></p>
<p><font face="Times New Roman"><br>
</font></p>
<p><font face="Times New Roman"><br>
</font></p>
<p><b><font face="Times New Roman">first
VM</font></b></p>
<p><font face="Times New Roman">00:03.0
Ethernet
controller: Red Hat, Inc Virtio network device<br>
</font></p>
<p><font face="Times New Roman">00:09.0
Ethernet
controller: Red Hat, Inc Virtio network
device</font></p>
<p><font face="Times New Roman">[root@node03 ~]#
ip
l<br>
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536
qdisc noqueue state UNKNOWN mode DEFAULT qlen 1<br>
link/loopback 00:00:00:00:00:00 brd
00:00:00:00:00:00<br>
2: eth0:
<BROADCAST,MULTICAST,UP,LOWER_<wbr>UP>
mtu 1500 qdisc pfifo_fast state UP mode DEFAULT
qlen 1000<br>
link/ether 00:1a:4a:16:01:51 brd
ff:ff:ff:ff:ff:ff<br>
3: eth1:
<BROADCAST,MULTICAST,UP,LOWER_<wbr>UP>
mtu 1500 qdisc pfifo_fast state UP mode DEFAULT
qlen 1000<br>
link/ether 00:1a:4a:16:01:55 brd
ff:ff:ff:ff:ff:ff<br>
</font></p>
<p><b><font face="Times New Roman">second
VM</font></b></p>
<p><font face="Times New Roman">00:03.0
Ethernet
controller: Realtek Semiconductor Co., Ltd.
RTL-8100/8101L/8139 PCI Fast Ethernet Adapter
(rev 20) - but i tested all version of NIC and
no effect<br>
</font></p>
<p><font face="Times New Roman">00:0a.0
Ethernet
controller: Red Hat, Inc Virtio network device<br>
</font></p>
<p><font face="Times New Roman">[root@node04 ~]#
ip
link<br>
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536
qdisc noqueue state UNKNOWN mode DEFAULT qlen 1<br>
link/loopback 00:00:00:00:00:00 brd
00:00:00:00:00:00<br>
2: eth0:
<BROADCAST,MULTICAST,UP,LOWER_<wbr>UP>
mtu 1500 qdisc pfifo_fast state UP mode DEFAULT
qlen 1000<br>
link/ether 00:1a:4a:16:01:53 brd
ff:ff:ff:ff:ff:ff<br>
3: ens3:
<BROADCAST,MULTICAST,UP,LOWER_<wbr>UP>
mtu 1500 qdisc pfifo_fast state UP mode DEFAULT
qlen 1000<br>
link/ether 00:1a:4a:16:01:52 brd
ff:ff:ff:ff:ff:ff<br>
</font></p>
<p><font face="Times New Roman">In logs no
messages
only like this :</font></p>
<p><font face="Times New Roman">May 26 15:01:01
node04 systemd: Started Session 67263 of user
root.<br>
May 26 15:01:01 node04 systemd: Starting Session
67263 of user root.<br>
May 26 15:01:01 node04 systemd: Created slice
user-600.slice.<br>
May 26 15:01:01 node04 systemd: Starting
user-600.slice.<br>
May 26 15:01:01 node04 systemd: Started Session
67262 of user bitrix.<br>
May 26 15:01:01 node04 systemd: Starting Session
67262 of user bitrix.<br>
May 26 15:01:01 node04 systemd: Removed slice
user-600.slice.<br>
May 26 15:01:01 node04 systemd: Stopping
user-600.slice.<br>
</font></p>
<p><font face="Times New Roman"><br>
</font></p>
<p><font face="Times New Roman"><span
class="">Hi
Alexander,<br>
<br>
So if I understand it correctly, you have the
following configuration:<br>
- 2 hosts, each having 2 NICs<br>
- 2 virtual machines, each have a connection
to each one of the NICs<br>
available on the hosts<br>
<br>
On one of the VMs you only see 1 NIC instead
of the 2?<br>
<br>
Are you sure that the VM is properly
configured to have 2 NICs?<br>
<br>
What Linux distro and version you're using on
the hosts and inside the VMs ?<br>
<br>
Can you please send us:<br>
- the logs from the VM, e.g. /var/log/messages<br>
- the output of lspci -v<br>
- the output of ip link<br>
<br>
Thanks in advance,<br>
<br>
</span></font></p>
<div>
<div class="h5"><font face="Times New
Roman">
2017-05-18 12:19 GMT+03:00 Герасимов Александр
<gerasimov.ay at <a href="http://eksmo.ru"
target="_blank"
moz-do-not-send="true">eksmo.ru</a>>:<br>
<br>
> Hi all.<br>
><br>
> I have to servers with ovirt.<br>
><br>
> And to identical virtual machines.<br>
><br>
> Both servers are identical. But on second
virtual server not working one<br>
> network interface. Ping have a problem. I
tried to change network driver,<br>
> but has no effect.<br>
><br>
> I don't understand that to do<br>
><br>
><br>
> ovirt version and package:<br>
><br>
> rpm -qa|grep ovirt<br>
>
ovirt-imageio-proxy-0.4.0-0.<wbr>201608310602.gita9b573b.el7.<wbr>centos.noarch<br>
>
ovirt-engine-vmconsole-proxy-<wbr>helper-4.0.5.5-1.el7.centos.<wbr>noarch<br>
>
ovirt-engine-restapi-4.0.5.5-<wbr>1.el7.centos.noarch<br>
>
ovirt-engine-extensions-api-<wbr>impl-4.0.5.5-1.el7.centos.<wbr>noarch<br>
>
ovirt-imageio-daemon-0.4.0-1.<wbr>el7.noarch<br>
>
ovirt-engine-wildfly-10.1.0-1.<wbr>el7.x86_64<br>
>
ovirt-vmconsole-1.0.4-1.el7.<wbr>centos.noarch<br>
>
ovirt-engine-cli-3.6.9.2-1.<wbr>el7.noarch<br>
>
ovirt-engine-websocket-proxy-<wbr>4.0.5.5-1.el7.centos.noarch<br>
>
ovirt-engine-dashboard-1.0.5-<wbr>1.el7.centos.noarch<br>
>
ovirt-host-deploy-1.5.3-1.el7.<wbr>centos.noarch<br>
>
ovirt-engine-wildfly-overlay-<wbr>10.0.0-1.el7.noarch<br>
>
ovirt-engine-setup-base-4.0.5.<wbr>5-1.el7.centos.noarch<br>
>
ovirt-engine-dwh-setup-4.0.5-<wbr>1.el7.centos.noarch<br>
>
ovirt-engine-setup-plugin-<wbr>websocket-proxy-4.0.5.5-1.el7.<wbr>centos.noarch<br>
>
ovirt-engine-setup-4.0.5.5-1.<wbr>el7.centos.noarch<br>
>
ovirt-engine-dbscripts-4.0.5.<wbr>5-1.el7.centos.noarch<br>
>
ovirt-engine-userportal-4.0.5.<wbr>5-1.el7.centos.noarch<br>
>
ovirt-imageio-common-0.4.0-1.<wbr>el7.noarch<br>
>
python-ovirt-engine-sdk4-4.0.<wbr>2-1.el7.centos.x86_64<br>
>
ovirt-vmconsole-host-1.0.4-1.<wbr>el7.centos.noarch<br>
>
ovirt-engine-dwh-4.0.5-1.el7.<wbr>centos.noarch<br>
>
ovirt-engine-tools-backup-4.0.<wbr>5.5-1.el7.centos.noarch<br>
>
ovirt-image-uploader-4.0.1-1.<wbr>el7.centos.noarch<br>
>
ovirt-engine-setup-plugin-<wbr>ovirt-engine-4.0.5.5-1.el7.<wbr>centos.noarch<br>
>
ovirt-engine-tools-4.0.5.5-1.<wbr>el7.centos.noarch<br>
>
ovirt-engine-4.0.5.5-1.el7.<wbr>centos.noarch<br>
> ovirt-release40-4.0.5-2.noarch<br>
>
ovirt-host-deploy-java-1.5.3-<wbr>1.el7.centos.noarch<br>
>
ovirt-engine-setup-plugin-<wbr>ovirt-engine-common-4.0.5.5-1.<wbr>el7.centos.noarch<br>
>
ovirt-iso-uploader-4.0.2-1.<wbr>el7.centos.noarch<br>
>
ovirt-engine-webadmin-portal-<wbr>4.0.5.5-1.el7.centos.noarch<br>
>
ovirt-setup-lib-1.0.2-1.el7.<wbr>centos.noarch<br>
>
ovirt-engine-sdk-python-3.6.9.<wbr>1-1.el7.centos.noarch<br>
>
ovirt-engine-lib-4.0.5.5-1.<wbr>el7.centos.noarch<br>
>
ovirt-imageio-proxy-setup-0.4.<wbr>0-0.201608310602.gita9b573b.<br>
> el7.centos.noarch<br>
>
ovirt-engine-setup-plugin-<wbr>vmconsole-proxy-helper-4.0.5.<br>
> 5-1.el7.centos.noarch<br>
>
ovirt-engine-backend-4.0.5.5-<wbr>1.el7.centos.noarch<br>
>
ovirt-engine-extension-aaa-<wbr>jdbc-1.1.1-1.el7.noarch<br>
>
ovirt-vmconsole-proxy-1.0.4-1.<wbr>el7.centos.noarch<br>
><br>
></font></div>
</div>
<br>
<div>
<div class="h5">
<pre class="m_-955767302654833500moz-signature"
cols="72">--
С уважением, базисный админстратор
Гераcимов Александр
тел. <a href="tel:+7%20495%20411-68-86" value="+74954116886"
target="_blank" moz-do-not-send="true">+7(495)4116886</a>
доб. 5367</pre>
</div>
</div>
</div>
<br>
______________________________<wbr>_________________<br>
Users mailing list<br>
<a href="mailto:Users@ovirt.org"
moz-do-not-send="true">Users(a)ovirt.org</a><br>
<a
href="http://lists.ovirt.org/mailman/listinfo/users"
rel="noreferrer" target="_blank"
moz-do-not-send="true">http://lists.ovirt.org/<wbr>mai...
<br>
</blockquote>
</div>
<br>
<br clear="all">
<br>
-- <br>
<div class="gmail_signature"
data-smartmail="gmail_signature">
<div dir="ltr">
<div>
<div dir="ltr">
<div>
<div dir="ltr">
<div>
<div dir="ltr">
<div><br>
<div>
<p
style="font-weight:bold;margin:0;padding:0;font-size:14px;text-transform:uppercase;margin-bottom:0"><span>Lev</span>
<span>Veyde</span></p>
<p
style="font-weight:normal;font-size:10px;margin:0px
0px
4px;text-transform:uppercase"><span>Software
Engineer</span><span
style="color:rgb(204,204,204)">,
<span
style="font-weight:normal;color:#aaa;margin:0">RHCE | RHCVA |
MCITP</span></span></p>
<p
style="font-weight:normal;margin:0;font-size:10px;color:#999"><a
style="color:#0088ce;font-size:10px;margin:0;text-decoration:none;font-family:'overpass',sans-serif"
href="https://www.redhat.com"
target="_blank"
moz-do-not-send="true">Red Hat
<span>Israel<br>
<br>
</span></a></p>
<p
style="font-weight:normal;margin:0px
0px
6px;font-size:10px;color:rgb(153,153,153)"><span
style="margin:0px;padding:0px">
<a
style="color:#0088ce;font-size:10px;margin:0;text-decoration:none;font-family:'overpass',sans-serif"
href="mailto:lev@redhat.com"
target="_blank"
moz-do-not-send="true">lev(a)redhat.com</a>
| </span><span><span
style="margin:0px;padding:0px"><a
style="color:#0088ce;font-size:10px;margin:0;text-decoration:none;font-family:'overpass',sans-serif"
href="mailto:lveyde@redhat.com" target="_blank"
moz-do-not-send="true">lveyde(a)redhat.com</a></span></span>
</p>
<a href="https://red.ht/sig"
target="_blank"
moz-do-not-send="true"> <img
src="https://www.redhat.com/profiles/rh/themes/redhatdotcom/img/logo...
moz-do-not-send="true"
width="90"
height="auto"></a>
<div><a
href="https://redhat.com/trusted"
style="text-decoration:none;color:#c00;font-weight:bold"
target="_blank"
moz-do-not-send="true">TRIED.
TESTED. TRUSTED.</a></div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</blockquote>
<br>
<pre class="moz-signature" cols="72">--
С уважением, базисный админстратор
Гераcимов Александр
тел. +7(495)4116886 доб. 5367</pre>
</body>
</html>
--------------2BC3D62F5D60034060583AEA--