Re: [ovirt-users] Migrate Hosted Engine to new iSCSI san with new IP/Target

Thanks, I have the hosted-engine moved and it is appearing in the GUI. I deleted it from the storage domain and then reimported it. I also changed the IQN in the answers file and hosted engine config The last issue I am running into is now I am trying to add 2nd hosted engine to bring everything back to a redundant state. When I do so it gets all the way until the end and fails with this - any insight? The host is reachable, it retrieves the answer file, I can ping and log into it etc... Thanks, Bill [ INFO ] The following CA certificate is going to be used, please immediately interrupt if not correct: [ INFO ] Issuer: C=US, O=belvederetrading.com, CN= chisrvprdovengine001.belvederetrading.com.53510, Subject: C=US, O= belvederetrading.com, CN=chisrvprdovengine001.belvederetrading.com.53510, Fingerprint (SHA-1): 69326701D7E77B0352049952F30FAFFDEB610C12 [ INFO ] Connecting to the Engine [ ERROR ] Cannot automatically add the host to cluster Default: Cannot add Host. Connecting to host via SSH has failed, verify that the host is reachable (IP address, routable address etc.) You may refer to the engine.log file for further details.

Please check Engine VM configuration. Make a selection from the options below: (1) Continue setup - Engine VM configuration has been fixed (2) Abort setup (1, 2)[1]: On Feb 2, 2016, at 12:59 PM, Bill Taney <bill(a)taney.com&gt; wrote: It is also pointing to the old iscsi target... On Feb 2, 2016, at 12:49 PM, Roy Golan <rgolan(a)redhat.com&gt; wrote: On Feb 2, 2016 8:38 PM, "Bill Taney" <bill(a)taney.com&gt; wrote: > > I do see a hosted_storage domain at the System level but it shows Unattached. You're using 3.6.1? That was a problem seen there. You can try to destroy this domain, without wiping out of course, and wait to see if it re imports > >> On Feb 2, 2016, at 12:31 PM, Simone Tiraboschi <stirabos(a)redhat.com&gt; wrote: >> >> >> >> On Tue, Feb 2, 2016 at 7:23 PM, Bill Taney <bill(a)taney.com&gt; wrote: >>> >>> Excuse my ignorance, I am not exactly sure what you are asking. I can see the vm and control it with hosted-engine on the node itself and can use the web administration page as well as SSH into the VM, it appears functionally fine. However the Hosted Engine VM does not show up in the web gui and I had thought that was by design but I am not sure. Is there anything you want me to check? Thanks again for your continued patience. >> >> >> On oVirt 3.6, the engine should auto-import the hosted-engine storage domain into the engine and you should see the engine VM in the engine as a regular VM. >> You will be able to manage that VM and edit soma parameters from the engine; all the modification will be saved in the OVF_STORE and reload by ovirt-ha-agent when the engine VM will restart. >> >> Can you please check if you see the hosted-engine storage domain into the engine webadmin? >> >>> >>> Bill >>> >>>> On Feb 2, 2016, at 12:04 PM, Simone Tiraboschi <stirabos(a)redhat.com&gt; wrote: >>>> >>>> >>>> >>>> On Tue, Feb 2, 2016 at 7:01 PM, Bill Taney <bill(a)taney.com&gt; wrote: >>>>> >>>>> Thanks, that works, I got the LUN moved from one Nimble to another.. I am still getting the error everything seems to work? any idea what this is ? >>>> >>>> >>>> Do you correctly see the engine VM in the engine? >>>> >>>> >>>>> >>>>> Feb 2 11:59:10 CHISRVPRDOVND002 ovirt-ha-agent: WARNING:ovirt_hosted_engine_ha.lib.ovf.ovf_store.OVFStore:Unable to find OVF_STORE >>>>> Feb 2 11:59:10 CHISRVPRDOVND002 journal: ovirt-ha-agent ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine.config ERROR Unable to get vm.conf from OVF_STORE, falling back to initial vm.conf >>>>> Feb 2 11:59:10 CHISRVPRDOVND002 ovirt-ha-agent: ERROR:ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine.config:Unable to get vm.conf from OVF_STORE, falling back to initial vm.conf >>>>> Feb 2 11:59:11 CHISRVPRDOVND002 ovirt-ha-agent: INFO:ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine:Current state EngineUp (score: 3400) >>>>> >>>>> >>>>>> On Feb 2, 2016, at 11:52 AM, Simone Tiraboschi <stirabos(a)redhat.com&gt; wrote: >>>>>> >>>>>> >>>>>> On Tue, Feb 2, 2016 at 6:33 PM, Bill Taney <bill(a)taney.com&gt; wrote: >>>>>>> >>>>>>> Current state GlobalMaintenance (score: 3400) >>>>>> >>>>>> >>>>>> Simply exit GlobalMaintenance mode :-) >>>>> >>>>> >>>> >>> >> > > > _______________________________________________ > Users mailing list > Users(a)ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > _______________________________________________ Users mailing list Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users _______________________________________________ Users mailing list Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users