Re: [Users] ovirt Connection Storage error

27 Feb 2013


      Hi,
can you please tell me what's the DC version?
can you also please run the following query and reply with the results?

select * from vdc_options where option_name like '%SupportForceCreateVG%';

----- Original Message -----
...
From: "xianghuadu" <xianghuadu@gmail.com>
To: "Liron Aravot" <laravot@redhat.com>
Cc: "users" <users@ovirt.org>
Sent: Wednesday, February 27, 2013 10:30:09 AM
Subject: Re: Re: [Users] ovirt Connection Storage error

hi liron aravot
Thank you for your help
[root@kvm1 libvirt]# cat libvirtd.conf
# Master libvirt daemon configuration file
#
# For further information consult http://libvirt.org/format.html
#
# NOTE: the tests/daemon-conf regression test script requires
# that each "PARAMETER = VALUE" line in this file have the parameter
# name just after a leading "#".
#################################################################
#
# Network connectivity controls
#
# Flag listening for secure TLS connections on the public TCP/IP
port.
# NB, must pass the --listen flag to the libvirtd process for this to
# have any effect.
#
# It is necessary to setup a CA and issue server certificates before
# using this capability.
#
# This is enabled by default, uncomment this to disable it
#listen_tls = 0
# Listen for unencrypted TCP connections on the public TCP/IP port.
# NB, must pass the --listen flag to the libvirtd process for this to
# have any effect.
#
# Using the TCP socket requires SASL authentication by default. Only
# SASL mechanisms which support data encryption are allowed. This is
# DIGEST_MD5 and GSSAPI (Kerberos5)
#
# This is disabled by default, uncomment this to enable it.
#listen_tcp = 1
# Override the port for accepting secure TLS connections
# This can be a port number, or service name
#
#tls_port = "16514"
# Override the port for accepting insecure TCP connections
# This can be a port number, or service name
#
#tcp_port = "16509"
# Override the default configuration which binds to all network
# interfaces. This can be a numeric IPv4/6 address, or hostname
#
#listen_addr = "192.168.0.1"
# Flag toggling mDNS advertizement of the libvirt service.
#
# Alternatively can disable for all services on a host by
# stopping the Avahi daemon
#
# This is enabled by default, uncomment this to disable it
#mdns_adv = 0
# Override the default mDNS advertizement name. This must be
# unique on the immediate broadcast network.
#
# The default is "Virtualization Host HOSTNAME", where HOSTNAME
# is subsituted for the short hostname of the machine (without
domain)
#
#mdns_name = "Virtualization Host Joe Demo"
#################################################################
#
# UNIX socket access controls
#
# Set the UNIX domain socket group ownership. This can be used to
# allow a 'trusted' set of users access to management capabilities
# without becoming root.
#
# This is restricted to 'root' by default.
#unix_sock_group = "libvirt"
# Set the UNIX socket permissions for the R/O socket. This is used
# for monitoring VM status only
#
# Default allows any user. If setting group ownership may want to
# restrict this to:
#unix_sock_ro_perms = "0777"
# Set the UNIX socket permissions for the R/W socket. This is used
# for full management of VMs
#
# Default allows only root. If PolicyKit is enabled on the socket,
# the default will change to allow everyone (eg, 0777)
#
# If not using PolicyKit and setting group ownership for access
# control then you may want to relax this to:
#unix_sock_rw_perms = "0770"
# Set the name of the directory in which sockets will be
found/created.
#unix_sock_dir = "/var/run/libvirt"
#################################################################
#
# Authentication.
#
# - none: do not perform auth checks. If you can connect to the
# socket you are allowed. This is suitable if there are
# restrictions on connecting to the socket (eg, UNIX
# socket permissions), or if there is a lower layer in
# the network providing auth (eg, TLS/x509 certificates)
#
# - sasl: use SASL infrastructure. The actual auth scheme is then
# controlled from /etc/sasl2/libvirt.conf. For the TCP
# socket only GSSAPI & DIGEST-MD5 mechanisms will be used.
# For non-TCP or TLS sockets, any scheme is allowed.
#
# - polkit: use PolicyKit to authenticate. This is only suitable
# for use on the UNIX sockets. The default policy will
# require a user to supply their own password to gain
# full read/write access (aka sudo like), while anyone
# is allowed read/only access.
#
# Set an authentication scheme for UNIX read-only sockets
# By default socket permissions allow anyone to connect
#
# To restrict monitoring of domains you may wish to enable
# an authentication mechanism here
#auth_unix_ro = "none"
# Set an authentication scheme for UNIX read-write sockets
# By default socket permissions only allow root. If PolicyKit
# support was compiled into libvirt, the default will be to
# use 'polkit' auth.
#
# If the unix_sock_rw_perms are changed you may wish to enable
# an authentication mechanism here
#auth_unix_rw = "none"
# Change the authentication scheme for TCP sockets.
#
# If you don't enable SASL, then all TCP traffic is cleartext.
# Don't do this outside of a dev/test scenario. For real world
# use, always enable SASL and use the GSSAPI or DIGEST-MD5
# mechanism in /etc/sasl2/libvirt.conf
#auth_tcp = "sasl"
# Change the authentication scheme for TLS sockets.
#
# TLS sockets already have encryption provided by the TLS
# layer, and limited authentication is done by certificates
#
# It is possible to make use of any SASL authentication
# mechanism as well, by using 'sasl' for this option
#auth_tls = "none"
#################################################################
#
# TLS x509 certificate configuration
#
# Override the default server key file path
#
#key_file = "/etc/pki/libvirt/private/serverkey.pem"
# Override the default server certificate file path
#
#cert_file = "/etc/pki/libvirt/servercert.pem"
# Override the default CA certificate path
#
#ca_file = "/etc/pki/CA/cacert.pem"
# Specify a certificate revocation list.
#
# Defaults to not using a CRL, uncomment to enable it
#crl_file = "/etc/pki/CA/crl.pem"
#################################################################
#
# Authorization controls
#
# Flag to disable verification of our own server certificates
#
# When libvirtd starts it performs some sanity checks against
# its own certificates.
#
# Default is to always run sanity checks. Uncommenting this
# will disable sanity checks which is not a good idea
#tls_no_sanity_certificate = 1
# Flag to disable verification of client certificates
#
# Client certificate verification is the primary authentication
mechanism.
# Any client which does not present a certificate signed by the CA
# will be rejected.
#
# Default is to always verify. Uncommenting this will disable
# verification - make sure an IP whitelist is set
#tls_no_verify_certificate = 1
# A whitelist of allowed x509 Distinguished Names
# This list may contain wildcards such as
#
# "C=GB,ST=London,L=London,O=Red Hat,CN=*"
#
# See the POSIX fnmatch function for the format of the wildcards.
#
# NB If this is an empty list, no client can connect, so comment out
# entirely rather than using empty list to disable these checks
#
# By default, no DN's are checked
#tls_allowed_dn_list = ["DN1", "DN2"]
# A whitelist of allowed SASL usernames. The format for usernames
# depends on the SASL authentication mechanism. Kerberos usernames
# look like username@REALM
#
# This list may contain wildcards such as
#
# "*@EXAMPLE.COM"
#
# See the POSIX fnmatch function for the format of the wildcards.
#
# NB If this is an empty list, no client can connect, so comment out
# entirely rather than using empty list to disable these checks
#
# By default, no Username's are checked
#sasl_allowed_username_list = ["joe@EXAMPLE.COM", "fred@EXAMPLE.COM"
]
#################################################################
#
# Processing controls
#
# The maximum number of concurrent client connections to allow
# over all sockets combined.
#max_clients = 20
# The minimum limit sets the number of workers to start up
# initially. If the number of active clients exceeds this,
# then more threads are spawned, upto max_workers limit.
# Typically you'd want max_workers to equal maximum number
# of clients allowed
#min_workers = 5
#max_workers = 20
# The number of priority workers. If all workers from above
# pool will stuck, some calls marked as high priority
# (notably domainDestroy) can be executed in this pool.
#prio_workers = 5
# Total global limit on concurrent RPC calls. Should be
# at least as large as max_workers. Beyond this, RPC requests
# will be read into memory and queued. This directly impact
# memory usage, currently each request requires 256 KB of
# memory. So by default upto 5 MB of memory is used
#
# XXX this isn't actually enforced yet, only the per-client
# limit is used so far
#max_requests = 20
# Limit on concurrent requests from a single client
# connection. To avoid one client monopolizing the server
# this should be a small fraction of the global max_requests
# and max_workers parameter
#max_client_requests = 5
#################################################################
#
# Logging controls
#
# Logging level: 4 errors, 3 warnings, 2 information, 1 debug
# basically 1 will log everything possible
#log_level = 3
# Logging filters:
# A filter allows to select a different logging level for a given
category
# of logs
# The format for a filter is:
# x:name
# where name is a match string e.g. remote or qemu
# the x prefix is the minimal level where matching messages should be
logged
# 1: DEBUG
# 2: INFO
# 3: WARNING
# 4: ERROR
#
# Multiple filter can be defined in a single @filters, they just need
to be
# separated by spaces.
#
# e.g:
# log_filters="3:remote 4:event"
# to only get warning or errors from the remote layer and only errors
from
# the event layer.
# Logging outputs:
# An output is one of the places to save logging information
# The format for an output can be:
# x:stderr
# output goes to stderr
# x:syslog:name
# use syslog for the output and use the given name as the ident
# x:file:file_path
# output to a file, with the given filepath
# In all case the x prefix is the minimal level, acting as a filter
# 1: DEBUG
# 2: INFO
# 3: WARNING
# 4: ERROR
#
# Multiple output can be defined, they just need to be separated by
spaces.
# e.g.:
# log_outputs="3:syslog:libvirtd"
# to log all warnings and errors to syslog under the libvirtd ident
# Log debug buffer size: default 64
# The daemon keeps an internal debug log buffer which will be dumped
in case
# of crash or upon receiving a SIGUSR2 signal. This setting allows to
override
# the default buffer size in kilobytes.
# If value is 0 or less the debug log buffer is deactivated
#log_buffer_size = 64
##################################################################
#
# Auditing
#
# This setting allows usage of the auditing subsystem to be altered:
#
# audit_level == 0 -> disable all auditing
# audit_level == 1 -> enable auditing, only if enabled on host
(default)
# audit_level == 2 -> enable auditing, and exit if disabled on host
#
#audit_level = 2
#
# If set to 1, then audit messages will also be sent
# via libvirt logging infrastructure. Defaults to 0
#
#audit_logging = 1
###################################################################
# UUID of the host:
# Provide the UUID of the host here in case the command
# 'dmidecode -s system-uuid' does not provide a valid uuid. In case
# 'dmidecode' does not provide a valid UUID and none is provided
here, a
# temporary UUID will be generated.
# Keep the format of the example UUID below. UUID must not have all
digits
# be the same.
# NB This default all-zeros UUID will not work. Replace
# it with the output of the 'uuidgen' command and then
# uncomment this entry
#host_uuid = "00000000-0000-0000-0000-000000000000"
###################################################################
# Keepalive protocol:
# This allows libvirtd to detect broken client connections or even
# dead client. A keepalive message is sent to a client after
# keepalive_interval seconds of inactivity to check if the client is
# still responding; keepalive_count is a maximum number of keepalive
# messages that are allowed to be sent to the client without getting
# any response before the connection is considered broken. In other
# words, the connection is automatically closed approximately after
# keepalive_interval * (keepalive_count + 1) seconds since the last
# message received from the client. If keepalive_interval is set to
# -1, libvirtd will never send keepalive requests; however clients
# can still send them and the deamon will send responses. When
# keepalive_count is set to 0, connections will be automatically
# closed after keepalive_interval seconds of inactivity without
# sending any keepalive messages. Disabled by default.
#
#keepalive_interval = 5
#keepalive_count = 5
#
# If set to 1, libvirtd will refuse to talk to clients that do not
# support keepalive protocol. Defaults to 0.
#
#keepalive_required = 1
## beginning of configuration section by vdsm-4.9.6
listen_addr="0.0.0.0"
unix_sock_group="kvm"
unix_sock_rw_perms="0770"
auth_unix_rw="sasl"
save_image_format="lzop"
log_outputs="1:file:/var/log/libvirtd.log"
log_filters="1:libvirt 3:event 3:json 1:util 1:qemu"
ca_file="/etc/pki/vdsm/certs/cacert.pem"
cert_file="/etc/pki/vdsm/certs/vdsmcert.pem"
key_file="/etc/pki/vdsm/keys/vdsmkey.pem"
## end of configuration section by vdsm-4.9.6
[root@kvm1 libvirt]# tail /var/log/libvirt/libvirtd.log -n 20
2013-02-26 06:33:27.063+0000: 2128: error :
remoteDispatchAuthPolkit:2559 : Policy kit denied action
org.libvirt.unix.manage from pid 4031, uid 36: exit status 2
2013-02-26 06:33:27.063+0000: 2128: error :
remoteDispatchAuthPolkit:2588 : authentication failed: Authorization
requires authentication but no agent is available.
2013-02-26 06:33:27.098+0000: 2119: error : virNetSocketReadWire:999
: End of file while reading data: Input/output error
2013-02-26 06:33:27.333+0000: 2120: error :
remoteDispatchAuthPolkit:2559 : Policy kit denied action
org.libvirt.unix.manage from pid 4041, uid 36: exit status 2
2013-02-26 06:33:27.333+0000: 2120: error :
remoteDispatchAuthPolkit:2588 : authentication failed: Authorization
requires authentication but no agent is available.
2013-02-26 06:33:27.368+0000: 2119: error : virNetSocketReadWire:999
: End of file while reading data: Input/output error
2013-02-26 06:33:27.603+0000: 2122: error :
remoteDispatchAuthPolkit:2559 : Policy kit denied action
org.libvirt.unix.manage from pid 4051, uid 36: exit status 2
2013-02-26 06:33:27.603+0000: 2122: error :
remoteDispatchAuthPolkit:2588 : authentication failed: Authorization
requires authentication but no agent is available.
2013-02-26 06:33:27.636+0000: 2119: error : virNetSocketReadWire:999
: End of file while reading data: Input/output error
2013-02-26 06:33:27.871+0000: 2124: error :
remoteDispatchAuthPolkit:2559 : Policy kit denied action
org.libvirt.unix.manage from pid 4061, uid 36: exit status 2
2013-02-26 06:33:27.872+0000: 2124: error :
remoteDispatchAuthPolkit:2588 : authentication failed: Authorization
requires authentication but no agent is available.
2013-02-26 06:33:27.904+0000: 2119: error : virNetSocketReadWire:999
: End of file while reading data: Input/output error
2013-02-26 06:33:28.142+0000: 2126: error :
remoteDispatchAuthPolkit:2559 : Policy kit denied action
org.libvirt.unix.manage from pid 4071, uid 36: exit status 2
2013-02-26 06:33:28.142+0000: 2126: error :
remoteDispatchAuthPolkit:2588 : authentication failed: Authorization
requires authentication but no agent is available.
2013-02-26 06:33:28.176+0000: 2119: error : virNetSocketReadWire:999
: End of file while reading data: Input/output error
xianghuadu
From: Liron Aravot
Date: 2013-02-27 16:01
To: xianghuadu
CC: users
Subject: Re: [Users] ovirt Connection Storage error
Hi, looking in the vdsm logs i see
libvirtError: authentication failed: Authorization requires
authentication but no agent is available.
can you please attach your libvirt configuration file and the libvirt
log perhaps?
----- Original Message -----
...
From: "xianghuadu" <xianghuadu@gmail.com>
To: "Liron Aravot" <laravot@redhat.com>
Cc: "users" <users@ovirt.org>
Sent: Tuesday, February 26, 2013 10:21:57 AM
Subject: Re: Re: [Users] ovirt Connection Storage error

hi liron aravot
attached is full vdsm log
thx
xianghuadu
From: Liron Aravot
Date: 2013-02-26 15:50
To: xianghuadu
CC: users
Subject: Re: [Users] ovirt Connection Storage error
Hi,
can you please attach the full vdsm log?
----- Original Message -----
...
From: "xianghuadu" <xianghuadu@gmail.com>
To: "users" <users@ovirt.org>
Sent: Tuesday, February 26, 2013 9:27:05 AM
Subject: [Users] ovirt Connection Storage error
Hi all
Add iscsi storage, Error while executing action New SAN storage
Domain: Unexpected exception.
engine log
2013-02-26 15:09:08,211 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase]
(ajp--127.0.0.1-8702-1) [4952790e] HostName = 225
2013-02-26 15:09:08,212 ERROR
[org.ovirt.engine.core.vdsbroker.VDSCommandBase]
(ajp--127.0.0.1-8702-1) [4952790e] Command FormatStorageDomainVDS
execution failed. Exception: VDSErrorException:
VDSGenericException:
VDSErrorException: Failed to FormatStorageDomainVDS, error =
Cannot
format attached storage domain:
('378ef2e6-e12d-4eae-8c6c-9bc2b983d4ce',)
2013-02-26 15:09:08,214 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.FormatStorageDomainVDSCommand]
(ajp--127.0.0.1-8702-1) [4952790e] FINISH,
FormatStorageDomainVDSCommand, log id: 1f498799
2013-02-26 15:09:08,215 ERROR
[org.ovirt.engine.core.bll.storage.RemoveStorageDomainCommand]
(ajp--127.0.0.1-8702-1) [4952790e] Command
org.ovirt.engine.core.bll.storage.RemoveStorageDomainCommand
throw
Vdc Bll exception. With error message VdcBLLException:
org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException:
VDSGenericException: VDSErrorException: Failed to
FormatStorageDomainVDS, error = Cannot format attached storage
domain: ('378ef2e6-e12d-4eae-8c6c-9bc2b983d4ce',)
2013-02-26 15:09:08,221 INFO
[org.ovirt.engine.core.bll.storage.RemoveStorageDomainCommand]
(ajp--127.0.0.1-8702-1) [4952790e] Lock freed to object
EngineLock
[exclusiveLocks= key: 378ef2e6-e12d-4eae-8c6c-9bc2b983d4ce value:
STORAGE
, sharedLocks= ]
2013-02-26 15:09:42,067 WARN
[org.ovirt.engine.core.bll.storage.UpdateStoragePoolCommand]
(ajp--127.0.0.1-8702-6) [a8c7727] CanDoAction of action
UpdateStoragePool failed.
Reasons:VAR__TYPE__STORAGE__POOL,ACTION_TYPE_FAILED_STORAGE_POOL_WITH_DEFAULT_VDS_GROUP_CANNOT_BE_LOCALFS,VAR__ACTION__UPDATE
2013-02-26 15:09:59,224 INFO
[org.ovirt.engine.core.bll.storage.UpdateStoragePoolCommand]
(ajp--127.0.0.1-8702-3) [3d8faa5f] Running command:
UpdateStoragePoolCommand internal: false. Entities affected : ID:
da5870e0-7aae-11e2-9da5-00188be4de29 Type: StoragePool
2013-02-26 15:10:00,000 INFO
[org.ovirt.engine.core.bll.AutoRecoveryManager]
(QuartzScheduler_Worker-80) Autorecovering hosts is disabled,
skipping
2013-02-26 15:10:00,001 INFO
[org.ovirt.engine.core.bll.AutoRecoveryManager]
(QuartzScheduler_Worker-80) Autorecovering storage domains is
disabled, skipping
2013-02-26 15:10:23,814 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetDeviceListVDSCommand]
(ajp--127.0.0.1-8702-2) START, GetDeviceListVDSCommand(HostName =
225, HostId = 342b111a-7fdf-11e2-a963-00188be4de29,
storageType=ISCSI), log id: 484eccef
2013-02-26 15:10:24,119 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.GetDeviceListVDSCommand]
(ajp--127.0.0.1-8702-2) FINISH, GetDeviceListVDSCommand, return:
[org.ovirt.engine.core.common.businessentities.LUNs@b420cc6], log
id: 484eccef
2013-02-26 15:10:32,523 INFO
[org.ovirt.engine.core.bll.storage.AddSANStorageDomainCommand]
(ajp--127.0.0.1-8702-4) [66fa978c] Running command:
AddSANStorageDomainCommand internal: false. Entities affected :
ID:
aaa00000-0000-0000-0000-123456789aaa Type: System
2013-02-26 15:10:32,539 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.CreateVGVDSCommand]
(ajp--127.0.0.1-8702-4) [66fa978c] START,
CreateVGVDSCommand(HostName = 225, HostId =
342b111a-7fdf-11e2-a963-00188be4de29,
storageDomainId=c13260c4-d1aa-455c-9031-0711a7a4cc8d,
deviceList=[1494554000000000078797a00000000000000000000000000],
force=false), log id: 4f1651f1
2013-02-26 15:10:32,578 ERROR
[org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase]
(ajp--127.0.0.1-8702-4) [66fa978c] Failed in CreateVGVDS method
2013-02-26 15:10:32,579 ERROR
[org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase]
(ajp--127.0.0.1-8702-4) [66fa978c] Error code unexpected and
error
message VDSGenericException: VDSErrorException: Failed to
CreateVGVDS, error = Unexpected exception
2013-02-26 15:10:32,581 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase]
(ajp--127.0.0.1-8702-4) [66fa978c] Command
org.ovirt.engine.core.vdsbroker.vdsbroker.CreateVGVDSCommand
return
value
Class Name:
org.ovirt.engine.core.vdsbroker.irsbroker.OneUuidReturnForXmlRpc
mUuid Null
mStatus Class Name:
org.ovirt.engine.core.vdsbroker.vdsbroker.StatusForXmlRpc
mCode 16
mMessage Unexpected exception
2013-02-26 15:10:32,585 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase]
(ajp--127.0.0.1-8702-4) [66fa978c] HostName = 225
2013-02-26 15:10:32,586 ERROR
[org.ovirt.engine.core.vdsbroker.VDSCommandBase]
(ajp--127.0.0.1-8702-4) [66fa978c] Command CreateVGVDS execution
failed. Exception: VDSErrorException: VDSGenericException:
VDSErrorException: Failed to CreateVGVDS, error = Unexpected
exception
2013-02-26 15:10:32,588 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.CreateVGVDSCommand]
(ajp--127.0.0.1-8702-4) [66fa978c] FINISH, CreateVGVDSCommand,
log
id: 4f1651f1
2013-02-26 15:10:32,589 ERROR
[org.ovirt.engine.core.bll.storage.AddSANStorageDomainCommand]
(ajp--127.0.0.1-8702-4) [66fa978c] Command
org.ovirt.engine.core.bll.storage.AddSANStorageDomainCommand
throw
Vdc Bll exception. With error message VdcBLLException:
org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException:
VDSGenericException: VDSErrorException: Failed to CreateVGVDS,
error
= Unexpected exception
2013-02-26 15:10:32,600 INFO
[org.ovirt.engine.core.bll.storage.AddSANStorageDomainCommand]
(ajp--127.0.0.1-8702-4) [66fa978c] Command
[id=62567c07-e736-4909-a501-ee8663d71eac]: Compensating
NEW_ENTITY_ID of
org.ovirt.engine.core.common.businessentities.storage_domain_dynamic;
snapshot: c13260c4-d1aa-455c-9031-0711a7a4cc8d.
2013-02-26 15:10:32,607 INFO
[org.ovirt.engine.core.bll.storage.AddSANStorageDomainCommand]
(ajp--127.0.0.1-8702-4) [66fa978c] Command
[id=62567c07-e736-4909-a501-ee8663d71eac]: Compensating
NEW_ENTITY_ID of
org.ovirt.engine.core.common.businessentities.storage_domain_static;
snapshot: c13260c4-d1aa-455c-9031-0711a7a4cc8d.
2013-02-26 15:10:32,617 ERROR
[org.ovirt.engine.core.bll.storage.AddSANStorageDomainCommand]
(ajp--127.0.0.1-8702-4) [66fa978c] Transaction rolled-back for
command:
org.ovirt.engine.core.bll.storage.AddSANStorageDomainCommand.
vdsm log
Thread-1296::DEBUG::2013-02-26
15:19:23,200::resourceManager::844::ResourceManager.Owner::(cancelAll)
Owner.cancelAll requests {}
Thread-1296::DEBUG::2013-02-26
15:19:23,200::task::978::TaskManager.Task::(_decref)
Task=`d9716eca-da88-472d-8fdd-19b8be8a02ab`::ref 0 aborting False
Thread-1302::DEBUG::2013-02-26
15:19:33,367::task::588::TaskManager.Task::(_updateState)
Task=`30352e65-67be-4cea-a094-9830c5bda21f`::moving from state
init
-> state preparing
Thread-1302::INFO::2013-02-26
15:19:33,367::logUtils::37::dispatcher::(wrapper) Run and
protect:
repoStats(options=None)
Thread-1302::INFO::2013-02-26
15:19:33,368::logUtils::39::dispatcher::(wrapper) Run and
protect:
repoStats, Return response: {}
Thread-1302::DEBUG::2013-02-26
15:19:33,368::task::1172::TaskManager.Task::(prepare)
Task=`30352e65-67be-4cea-a094-9830c5bda21f`::finished: {}
Thread-1302::DEBUG::2013-02-26
15:19:33,368::task::588::TaskManager.Task::(_updateState)
Task=`30352e65-67be-4cea-a094-9830c5bda21f`::moving from state
preparing -> state finished
Thread-1302::DEBUG::2013-02-26
15:19:33,368::resourceManager::809::ResourceManager.Owner::(releaseAll)
Owner.releaseAll requests {} resources {}
Thread-1302::DEBUG::2013-02-26
15:19:33,368::resourceManager::844::ResourceManager.Owner::(cancelAll)
Owner.cancelAll requests {}
Thread-1302::DEBUG::2013-02-26
15:19:33,368::task::978::TaskManager.Task::(_decref)
Task=`30352e65-67be-4cea-a094-9830c5bda21f`::ref 0 aborting False
_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users